Cited by 218Phase Change Materials ResearchSolar Energy Systems and TechnologiesBuilding Energy and Comfort Optimization

The DOI matches its Crossref record; 150 of the 152 references it cites were found in a registry or an index.

Optical and thermal performance of glazing units containing PCM in buildings: A review

Li, Dong, Wu, Yangyang, Wang, Baichao, Liu, Changyu, Arıcı, Müslüm·2020·Construction and Building Materials

DOI 10.1016/j.conbuildmat.2019.117327

Open this paper in CoChat — free account

Abstract

Abstract Glazing units are important for providing passive solar gain and air ventilation in buildings, but their thermal performance is very poor compared to other building components, which results that energy loss from building envelope becomes much more drastic when the glazing area is large. Incorporating phase change material (PCM) in the glazing unit is an effective approach to increase its thermal performance. The glazing unit containing PCM can absorb part of the solar radiation for thermal energy storage while letting the visible radiation enter the indoor ambient for daylighting, which results in reduction of the temperature fluctuations and improvement of the thermal comfort of indoor occupants. A lot of researchers investigated optical and thermal performance of window systems containing PCM in buildings. However, there is a lack of published research review including numerical methods of optical and thermal performance and physical parameters of PCM used in the glazing units, especially for the optical performance of glazing units containing PCM. The present work reviews the experimental and simulation researches on the optical and thermal performance of glazing units containing PCM and discusses the employed research methods, mathematical models and important conclusions drawn. Finally, the challenges and future works of glazing units containing PCM are addressed.

Integrity signals

Registry

Crossref · 10.1016/j.conbuildmat.2019.117327

Cites

150 of 150 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

CONVECTION HEAT TRANSFER
Barron, R. F. (1999) · CRC Press eBooks · doi:10.1201/b15230-9 · Cited by 3,537
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
A review on energy conservation in building applications with thermal storage by latent heat using phase change materials
Khudhair, A. M., & Farid, M. M. (2003) · Energy Conversion and Management · doi:10.1016/s0196-8904(03)00131-6 · Cited by 1,398
PCM thermal storage in buildings: A state of art
Tyagi, V. V., & Buddhi, D. (2005) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2005.10.002 · Cited by 1,137
Aerogel insulation for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., & Gustavsen, A. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.12.012 · Cited by 1,094
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
Akeiber, H. J., Nejat, P., Majid, M. Z. A., Wahid, M. B. A., Jomehzadeh, F., Famileh, I. Z., Calautit, J. K., Hughes, B. R., & Zaki, S. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.036 · Cited by 1,082
Phase change materials for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., & Gustavsen, A. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.03.026 · Cited by 1,048
Toward aerogel based thermal superinsulation in buildings: A comprehensive review
Cüce, E., Cuce, P. M., Wood, C. J., & Riffat, S. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.03.017 · Cited by 806
Convection Heat Transfer
Iguchi, M., & Ilegbusi, O. J. (2013) · Springer eBooks · doi:10.1007/978-4-431-54020-5_6 · Cited by 710
Fenestration of today and tomorrow: A state-of-the-art review and future research opportunities
Jelle, B. P., Hynd, A., Gustavsen, A., Arasteh, D., Goudey, H., & Hart, R. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.08.010 · Cited by 554

Show all 152 references

Research works printed but not linked: 3

Zhong, 2014, Dynamic heat transfer characteristics of PCM-filled glass window and hollow glass window, CIESC J., 65, 114
Mohammad, 2017, Thermal performance evaluation of low-E coated building glazing systems, Naqshejahan, 6, 025
Kolacek, 2017, Experimental and numerical research of the thermal properties of a PCM window panel, Sustainability, 9, 1, 10.3390/su9071222 · DOI

Latent thermal energy storage technologies and applications: A review
Jouhara, H., Żabnieńska-Góra, A., Khordehgah, N., Ahmad, D., & Lipinski, T. (2020) · International Journal of Thermofluids · doi:10.1016/j.ijft.2020.100039 · Cited by 543
“Therefore, and bearing in mind that it has different melting points, it can be used to enhance indoor thermal performance by using it in double-glazed units, thereby reducing the energy demand of the building [28].”
BackgroundMethodInfluential
Recent advancements in latent heat phase change materials and their applications for thermal energy storage and buildings: A state of the art review
Hassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Renewable energy systems for building heating, cooling and electricity production with thermal energy storage
Zhang, S., Ocłoń, P., Klemeš, J. J., Michorczyk, P., Pielichowska, K., & Pielichowski, K. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112560 · Cited by 275
Thermal performance of the building envelope integrated with phase change material for thermal energy storage: an updated review.
Rathore, P. K. S., Gupta, N. K., Yadav, D., Shukla, S. K., & Kaul, S. (2022) · Sustainable Cities and Society · doi:10.1016/j.scs.2022.103690 · Cited by 268
Electrically actuated visible and near-infrared regulating switchable smart window for energy positive building: A review
Nundy, S., Mesloub, A., Alsolami, B. M., & Ghosh, A. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126854 · Cited by 254
A review of metallic materials for latent heat thermal energy storage: Thermophysical properties, applications, and challenges
Costa, S.-C., & Kenisarin, M. M. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111812 · Cited by 235
From nearly zero energy buildings (NZEB) to positive energy buildings (PEB): The next challenge-The most recent European trends with some notes on the energy analysis of a forerunner PEB example
Magrini, A., Lentini, G., Cuman, S., Bodrato, A., & Marenco, L. (2020) · Developments in the Built Environment · doi:10.1016/j.dibe.2020.100019 · Cited by 214
Recent development on heat transfer and various applications of phase-change materials
Yang, L., Jin, X., Zhang, Y., & Du, K. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124432 · Cited by 197
Performance enhancement of tubular solar still using nano-enhanced energy storage material integrated with v-corrugated aluminum basin, wick, and nanofluid
Abdelaziz, G. B., Algazzar, A. M., El‐Said, E. M. S., Elsaid, A. M., Sharshir, S. W., Kabeel, A. E., & El-Behery, S. M. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102933 · Cited by 192
Phase change material based advance solar thermal energy storage systems for building heating and cooling applications: A prospective research approach
Tyagi, V. V., Chopra, K., Kalidasan, B., Chauhan, A., Stritih, U., Anand, S., Pandey, A. K., Sarı, A., & Kothari, R. (2021) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101318 · Cited by 171
Advancements in phase change materials for energy-efficient building construction: A comprehensive review
Reddy, V. J., Ghazali, M. F., & Sudhakar, K. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.110494 · Cited by 164
Pathway to Sustainability: An Overview of Renewable Energy Integration in Building Systems
Reddy, V. J., Hariram, N. P., Ghazali, M. F., & Sudhakar, K. (2024) · Sustainability · doi:10.3390/su16020638 · Cited by 163
Global technological advancement and challenges of glazed window, facade system and vertical greenery-based energy savings in buildings: A comprehensive review
Akram, M. W., Hasannuzaman, M., Cüce, E., & Cuce, P. M. (2021) · Energy and Built Environment · doi:10.1016/j.enbenv.2021.11.003 · Cited by 145
Application of phase change material in improving trombe wall efficiency: An up-to-date and comprehensive overview
Xiong, Q., Alshehri, H. M., Monfaredi, R., Tayebi, T., Majdoub, F., Hajjar, A., Delpisheh, M., & Izadi, M. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.111824 · Cited by 134
Description of phase change materials (PCMs) used in buildings under various climates: A review
Liu, L., Hammami, N., Trovalet, L., Bigot, D., Habas, J., & Malet-Damour, B. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105760 · Cited by 128
Thermal performance of a double-glazed window integrated with a phase change material (PCM)
King, M. F. L., rao, P. N., Sivakumar, A. A., Mamidi, V. K., Richard, S., Vijayakumar, M. D., Arunprasath, K., & Kumar, P. M. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.09.099 · Cited by 122
Three-dimensional directional cellulose-based carbon aerogels composite phase change materials with enhanced broadband absorption for light-thermal-electric conversion
Wu, G., Bing, N., Li, Y., Xie, H., & Yu, W. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115361 · Cited by 123
Seasonal and annual performance analysis of PCM-integrated building brick under the climatic conditions of Marmara region
Tunçbilek, E., Arıcı, M., Bouadila, S., & Wonorahardjo, S. (2020) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-09320-8 · Cited by 114
Self-citation
Thermal management performance and mechanical properties of a novel cementitious composite containing fly ash/lauric acid-myristic acid as form-stable phase change material
Hekimoğlu, G., Nas, M., Ouikhalfan, M., Sarı, A., Kurbetçi, Ş., Tyagi, V. V., Sharma, R. K., & Saleh, T. A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.122105 · Cited by 107
Nano-enhanced phase change materials for thermal energy storage: A comprehensive review of recent advancements, applications, and future challenges
Wong, W. P., Kagalkar, A., Patel, R., Patel, P., Dharaskar, S. A., Walvekar, R., Khalid, M., & Gedam, V. V. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109265 · Cited by 101
A novel approach to investigate the thermal comfort of the lightweight relocatable building integrated with PCM in different climates of Kazakhstan during summertime
Adilkhanova, I., Memon, S. A., Kim, J. R., & Sheriyev, A. (2020) · Energy · doi:10.1016/j.energy.2020.119390 · Cited by 97
Pareto optimal design of a finned latent heat thermal energy storage unit using a novel hybrid technique
Maleki, H., Ashrafi, M., Ilghani, N. Z., Goodarzi, M., & Muhammad, T. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103310 · Cited by 97
A comprehensive review of micro/nano enhanced phase change materials
Teggar, M., Arıcı, M., Mert, M. S., Ajarostaghi, S. S. M., Niyas, H., Tunçbilek, E., Ismail, K. A. R., Younsi, Z., Benhouia, A. T., & Mezaache, E. H. (2021) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-021-10808-0 · Cited by 95
Self-citation
Energy saving performance optimization and regional adaptability of prefabricated buildings with PCM in different climates
Jia, J., Liu, B., Ma, L., Wang, H., Li, D., & Wang, Y. (2021) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2021.101164 · Cited by 94
Self-citation
Experimental analysis of combined utilization of CuO nanoparticles in latent heat storage unit and absorber coating in a single-slope solar desalination system
Selımefendıgıl, F., Şirin, C., & Oztop, H. F. (2022) · Solar Energy · doi:10.1016/j.solener.2022.01.039 · Cited by 93
A comprehensive review of the thermal performance in energy efficient building envelope incorporated with phase change materials
Tripathi, B. M., & Shukla, S. K. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.110128 · Cited by 88
Evaluation of energy-saving retrofits for sunspace of rural residential buildings based on orthogonal experiment and entropy weight method
Li, Q., Hu, H., Ma, L., Wang, Z., Arıcı, M., Li, D., Luo, D., Jia, J., Jiang, W. A., & Qi, H. (2022) · Energy Sustainable Development/Energy for sustainable development · doi:10.1016/j.esd.2022.09.007 · Cited by 86
Self-citation
Towards Passive Building Thermal Regulation: A State-of-the-Art Review on Recent Progress of PCM-Integrated Building Envelopes
Jiao, K., Lu, L., Zhao, L., & Wang, G. (2024) · Sustainability · doi:10.3390/su16156482 · Cited by 85
Evaluation of pumice for development of low-cost and energy-efficient composite phase change materials and lab-scale thermoregulation performances of its cementitious plasters
Sarı, A., Hekimoğlu, G., Tyagi, V. V., & Sharma, R. K. (2020) · Energy · doi:10.1016/j.energy.2020.118242 · Cited by 80
Thermal performance of a reversible multiple-glazing roof filled with two PCM
Zhang, S., Ma, Y., Li, D., Liu, C., & Yang, R. (2021) · Renewable Energy · doi:10.1016/j.renene.2021.11.008 · Cited by 79
Self-citation
Adaptive dynamic building envelope integrated with phase change material to enhance the heat storage and release efficiency: A state-of-the-art review
Wang, P., Liu, Z., Zhang, X., Hu, M., Zhang, L., & Fan, J. (2023) · Energy and Buildings · doi:10.1016/j.enbuild.2023.112928 · Cited by 78
Impact of a passive retrofit shading system on educational building to improve thermal comfort and energy consumption
Park, J. H., Yun, B. Y., Chang, S. J., Wi, S., Jeon, J., & Kim, S. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.109930 · Cited by 74
Sensitivity of AHU power consumption to PCM implementation in the wall-considering the solar radiation
Nariman, A., Kalbasi, R., & Rostami, S. (2020) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-10068-4 · Cited by 71
Influence of sunspace on energy consumption of rural residential buildings
Ma, L., Zhang, X., Li, D., Arıcı, M., Yıldız, Ç., Li, Q., Zhang, S., & Jiang, W. A. (2020) · Solar Energy · doi:10.1016/j.solener.2020.09.043 · Cited by 71
Self-citation
Modelling of thermal processes in a glazing structure with temperature dependent optical properties - An example of PCM-window
Wieprzkowicz, A., & Heim, D. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.06.146 · Cited by 65
Thermophysical characterization of paraffin-based PCMs for low temperature thermal energy storage applications for buildings
Soares, N., Matias, T., Durães, L. M. R., Simões, P. N., & Costa, J. J. (2023) · Energy · doi:10.1016/j.energy.2023.126745 · Cited by 64
Energy-saving owing to using PCM into buildings: Considering of hot and cold climate region
Dehkordi, B. S., & Afrand, M. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2022.102112 · Cited by 63
Comprehensive Review of the Advancements, Benefits, Challenges, and Design Integration of Energy-Efficient Materials for Sustainable Buildings
Alassaf, Y. (2024) · Buildings · doi:10.3390/buildings14092994 · Cited by 61
The role of inclination and orientation of different building roof typologies on indoor and outdoor environment thermal comfort in Italy and Greece
Mazzeo, D., & Kontoleon, K. J. (2020) · Sustainable Cities and Society · doi:10.1016/j.scs.2020.102111 · Cited by 61
Quantitative evaluation of the thermal and energy performance of the PCM integrated building in the subtropical climate zone for current and future climate scenario
Nurlybekova, G., Memon, S. A., & Adilkhanova, I. (2020) · Energy · doi:10.1016/j.energy.2020.119587 · Cited by 61
Incorporating phase change materials into glazing units for building applications: Current progress and challenges
Li, D., Yang, R., Arıcı, M., Wang, B., Tunçbilek, E., Wu, Y., Liu, C., Ma, Z., & Ma, Y. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118374 · Cited by 60
Self-citation
Diffuse transmission dominant smart and advanced windows for less energy-hungry building: A review
Ghosh, A. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.105604 · Cited by 59
Photothermal and energy performance of an innovative roof based on silica aerogel-PCM glazing systems
Li, D., Ma, Y., Zhang, S., Yang, R., Zhang, C., & Liu, C. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115567 · Cited by 58
Self-citation
Comprehensive Review and Analysis of Glazing Systems towards Nearly Zero-Energy Buildings: Energy Performance, Thermal Comfort, Cost-Effectiveness, and Environmental Impact Perspectives
Moghaddam, S. A., Serra, C., da Silva, M. G., & Simões, N. A. V. (2023) · Energies · doi:10.3390/en16176283 · Cited by 58
Thermal efficiency of PCM filled double glazing units in Egypt
Bolteya, A. M., Elsayad, M. A., & Belal, A. (2021) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2020.12.004 · Cited by 55
Effect of sunspace and PCM louver combination on the energy saving of rural residences: Case study in a severe cold region of China
Li, Q., Wang, Y., Ma, L., Arıcı, M., Li, D., Yıldız, Ç., & Zhu, Y. (2021) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101126 · Cited by 54
Self-citation
Mechanical and thermal properties of artificial stone finishing materials mixed with PCM impregnated lightweight aggregate and carbon material
Kim, Y. U., Park, J. H., Yun, B. Y., Yang, S., Wi, S., & Kim, S. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121882 · Cited by 53
Thermoeconomic analysis of a wall incorporating phase change material in a rural residence located in northeast China
Li, Q., Ma, L., Li, D., Arıcı, M., Yıldız, Ç., Wang, Z., & Liu, Y. (2021) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101091 · Cited by 53
Self-citation
Fatty Acids as Phase Change Materials for Building Applications: Drawbacks and Future Developments
Herrera, P., Siegler, H. D. L. H., & Clarke, M. (2024) · Energies · doi:10.3390/en17194880 · Cited by 51
Introduction to thermal energy storage systems
Cabeza, L. F., Martorell, I., Miró, L., Fernández, A. I., Barreneche, C., Cabeza, L. F., Fernández, A. I., & Barreneche, C. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819885-8.00001-2 · Cited by 51
Improving the thermal conductivity of paraffin by incorporating MWCNTs nanoparticles
Yan, S., Kalbasi, R., Karimipour, A., & Afrand, M. (2020) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-09819-0 · Cited by 49
Energy performance of window with PCM frame
Jiang, W. A., Liu, B., Zhang, X., Zhang, T., Li, D., & Ma, L. (2021) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101109 · Cited by 49
Self-citation
Thermal properties of a cement composite containing phase change materials (PCMs) with post-pyrolytic char obtained from spent tyres as a carrier
Ryms, M., Januszewicz, K., Haustein, E., Kazimierski, P., & Lewandowski, W. M. (2021) · Energy · doi:10.1016/j.energy.2021.121936 · Cited by 47
Comprehensive performance evaluation of double-glazed windows containing hybrid nanoparticle-enhanced phase change material
Yang, X., Li, D., Yang, R., Ma, Y., Tong, X., Wu, Y., & Arıcı, M. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.119976 · Cited by 46
Self-citation
Parametric investigation of a nanofluid-NEPCM based spectral splitting photovoltaic/thermal system
Yazdanifard, F., Ameri, M., & Taylor, R. A. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.114232 · Cited by 44
Assessment of the Effect of Phase Change Material (PCM) Glazing on the Energy Consumption and Indoor Comfort of an Office in a Semiarid Climate
Uribe, D., & Vera, S. (2021) · Applied Sciences · doi:10.3390/app11209597 · Cited by 43
Improved heating floor thermal performance by adding PCM microcapsules enhanced by single and hybrid nanoparticles
Babaharra, O., Choukairy, K., Faraji, H., & Hamdaoui, S. (2023) · Heat Transfer · doi:10.1002/htj.22853 · Cited by 42
Selection of phase change material and establishment of thermophysical properties of phase change material integrated with roof of a building using Measure of Key Response index: Proposal of a new parameter
Bhamare, D. K., Rathod, M. K., & Banerjee, J. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101812 · Cited by 42
Is the thermal transmittance of air-filled inclined multi-glazing windows similar to that of vertical ones?
Arıcı, M., Tükel, M., Yıldız, Ç., Li, D., & Karabay, H. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110515 · Cited by 42
Self-citation
Artificial neural network-based smart aerogel glazing in low-energy buildings: A state-of-the-art review
Zhou, Y. (2021) · iScience · doi:10.1016/j.isci.2021.103420 · Cited by 41
Phase change material window for dynamic energy flow regulation: Review
Li, C., & Tang, H. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113937 · Cited by 40
An experimental investigation on winter heat storage in compact salinity gradient solar ponds with silicon dioxide particulates infused paraffin wax
Arulprakasajothi, M., Poyyamozhi, N., Saranya, A., Elangovan, K., Devarajan, Y., Murugapoopathi, S., & Amesho, K. T. T. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.110503 · Cited by 38
Usefulness of loading PCM into envelopes in arid climate based on Köppen–Geiger classification - Annual assessment of energy saving and GHG emission reduction
Al‐Rashed, A. A. A. A., Alnaqi, A. A., & Alsarraf, J. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103152 · Cited by 38
Recent Progress in Polyethylene‐enhanced Organic Phase Change Composite Materials for Energy Management
Wu, W., Yeo, G. M. D., Wang, S., Liu, Z., Loh, X. J., & Zhu, Q. (2023) · Chemistry - An Asian Journal · doi:10.1002/asia.202300391 · Cited by 38
A review of novel methods and current developments of phase change materials in the building walls for cooling applications
Anfas Mukram, T., & Daniel, J. (2021) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101709 · Cited by 37
The influence of external temperature and convective heat exchange with an environment on heat transfer inside phase change material embedded brick
Bondareva, N. S., Sheikholeslami, M., & Sheremet, M. А. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.102087 · Cited by 37
Application of fluids and promising materials as advanced inter-pane media in multi-glazing windows for thermal and energy performance improvement: A review
Huang, Y., Mankibi, M. E., Cantin, R., & Coillot, M. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.111458 · Cited by 37
Net-zero energy optimization of solar greenhouses in severe cold climate using passive insulation and photovoltaic
Jiang, W. A., Jin, Y., Liu, G., Ju, Z., Arıcı, M., Li, D., & Guo, W. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.136770 · Cited by 37
Self-citation
Energy and Thermal Performance Analysis of PCM-Incorporated Glazing Units Combined with Passive and Active Techniques: A Review Study
Arasteh, H., Maref, W., & Saber, H. H. (2023) · Energies · doi:10.3390/en16031058 · Cited by 36
Construction strategies and thermal energy storage applications of shape‐stabilized phase change materials
Yan, J., Hu, D., Wang, Z., & Ma, W. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51550 · Cited by 33
Literature review of solar control smart building glazing: Technologies, performance, and research insights
Teixeira, H., Moret, A. R., Aelenei, D., & Gomes, M. G. (2025) · Building and Environment · doi:10.1016/j.buildenv.2025.112784 · Cited by 32
A Mie optimization model to determine optical properties of PCM based nanofluids for solar thermal applications of glazing window
Yang, R., Li, D., Wei, W., & Wang, F. (2020) · Optik · doi:10.1016/j.ijleo.2020.164664 · Cited by 31
Self-citation
PCM-enhanced sunspace for energy efficiency and CO2 mitigation in a house in mediterranean climate
Uludaş, M. Ç., Tunçbilek, E., Yıldız, Ç., Arıcı, M., Li, D., & Krajčík, M. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104856 · Cited by 31
Self-citation
Energy analysis of evacuated tube solar collector integrating phase change material in northeast China
Wu, Y., Tong, X., Li, D., Arıcı, M., Liu, C., Liu, Y., Yang, R., & Yu, Y. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105772 · Cited by 31
Self-citation
Introducing novel configurations for double-glazed windows with lower energy loss
Tafakkori, R., & Fattahi, A. (2020) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2020.100919 · Cited by 31
Full-Spectrum Solar Energy Utilization and Enhanced Solar Energy Harvesting via Photon Anti-Reflection and Scattering Performance Using Nanophotonic Structure
Liang, H., Wang, F., Cheng, Z., Xu, C., Li, G., & Shuai, Y. (2020) · ES Energy & Environments · doi:10.30919/esee8c456 · Cited by 30
Lessons learned from 25 years of development of photoelectrochromic devices: A technical review
Syrrokostas, G., Leftheriotis, G., & Yannopoulos, S. N. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112462 · Cited by 30
Glazing systems utilizing phase change materials: Solar-optical characteristics, potential for energy conservation, role in reducing carbon emissions, and impact on natural illumination
Shaik, S., Priya, A. V., Maduru, V. R., Rahaman, A., Arıcı, M., Kontoleon, K. J., & Li, D. (2024) · Energy and Buildings · doi:10.1016/j.enbuild.2024.114151 · Cited by 29
Self-citation
Fly Ash/Paraffin Composite Phase Change Material Used to Treat Thermal and Mechanical Properties of Expansive Soil in Cold Regions
Chen, Y., Huang, Y., & Wang, M. W. A. S. (2021) · JOURNAL OF RENEWABLE MATERIALS · doi:10.32604/jrm.2022.018856 · Cited by 29
Advanced building envelope by integrating phase change material into a double-pane window at various orientations
Al-Yasiri, Q. M. Q., Alshara, A. K., Sudani, M. A., Khafaji, A. A., & Al-Bahadli, M. (2024) · Energy and Buildings · doi:10.1016/j.enbuild.2024.115140 · Cited by 28
Photothermal performance of plastic greenhouse embedded with phase change materials in translucent envelopes: A dynamic experimental study
Yang, R., Li, D., Arıcı, M., Wang, B., Wu, Y., Ma, Y., & Yang, X. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.106375 · Cited by 28
Self-citation
Phase change materials for energy efficiency in photovoltaic systems and buildings: A review
Poudhar, A., & Ghosh, A. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.112360 · Cited by 27
Numerical modeling of the thermal performance of soil containing microencapsulated PCM
Kravchenko, E., Liu, J., & Li, X. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123865 · Cited by 27
Thermal and morphological study of paraffin/SEBS/expanded graphite composite phase change material for thermal energy storage
Aulakh, J. S., & Joshi, D. P. (2022) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2022.2053764 · Cited by 27
Experimental investigation of salinity gradient solar pond with nano-based phase change materials
Arulprakasajothi, M., Poyyamozhi, N., Chandrakumar, P., Raja, N. D., & Yuvarajan, D. (2023) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2023.2207508 · Cited by 27
Thermal analysis of PEG/Metal particle-coated viscose fabric
Yang, K., Wiener, J., Venkataraman, M., Wang, Y., Yang, T., Zhang, G., Zhu, G., Yao, J., & Militký, J. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107231 · Cited by 26
A review of the application of sunspace in buildings
Ma, Q., Chen, X., Wang, X., Gao, W., Wei, X., & Fukuda, H. (2021) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2021.1963884 · Cited by 26
Enhancement Techniques for the Reduction of Heating and Cooling Loads in Buildings: A Review
Ismail, K. A. R., Lino, F. A. M., Henriquez, J. R., Teggar, M., Laouer, A., Arıcı, M., Benhorma, A., & Rodríguez, D. (2023) · Journal of Energy and Power Technology · doi:10.21926/jept.2304031 · Cited by 26
Self-citation
Thermal performance testing of triple-glazing water flow window in cooing operation
Liu, C., Lyu, Y., Li, C., Li, J., Zhuo, K., & Su, H. (2021) · Solar Energy · doi:10.1016/j.solener.2021.02.048 · Cited by 26
Self-citation
GPU-accelerated lattice Boltzmann simulation of heat transfer characteristics of porous brick roof filled with phase change materials
Luo, Z., Xu, H., Lou, Q., Feng, L., & Ni, J. (2020) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2020.104911 · Cited by 25
Experimental investigation on thermal properties of Al 2 O 3 nanoparticles dispersed paraffin for thermal energy storage applications
Li, D., Wang, Z., Wu, Y., Liu, C., & Arıcı, M. (2021) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2021.1916133 · Cited by 25
Self-citation
Phase change material dependency on solar power plant building through examination of energy-saving
Rawa, M. J. H., Abu‐Hamdeh, N. H., Karimipour, A., Nusier, O. K., Ghaemi, F., & Bǎleanu, D. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103718 · Cited by 25
Insight into thermal regulation of supercapacitors via surface-engineered phase change microcapsules
Hu, Y. P., Chen, H., Liu, M., Tang, Q., Huang, Y., Shen, G., Zhang, Y., Liu, C., Huang, Z., Gu, K., et al. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.10.014 · Cited by 25
Self-citation
Energy saving retrofit of rural house based on the joint utilization of solar collector and attached sunspace
Tian, H., Ma, L., Li, Q., Li, D., Jiang, W. A., Zhang, X., Hu, H.-L., & Han, Y. (2023) · Energy and Buildings · doi:10.1016/j.enbuild.2023.113591 · Cited by 25
Self-citation
Photo‐thermal conversion and heat storage characteristics of multi‐walled carbon nanotubes dispersed magnetic phase change microcapsules slurry
Gao, G., Zhang, T., Guo, C., Jiao, S., & Rao, Z. (2020) · International Journal of Energy Research · doi:10.1002/er.5436 · Cited by 24
Study on photothermal properties of Zn-ZnO/paraffin binary nanofluids as a filler for double glazing unit
Ma, M., Xie, M., & Ai, Q. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.122173 · Cited by 24
Theoretical investigation on inverse identification of spectral properties of paraffin phase change materials based on multi-thickness model
Wei, L., Li, G., Song, M., & Sun, S. (2021) · Solar Energy · doi:10.1016/j.solener.2021.07.006 · Cited by 23
Synergistic Effect of Paraffin-Incorporated In2O3/ZnO Multifold Smart Glazing Composite for the Self-Cleaning and Energy-Saving Built Environment
Roy, A., Ullah, H., Alzahrani, M., Ghosh, A., Mallick, T. K., & Tahir, A. A. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c00260 · Cited by 23
Thermal energy management in buildings and constructions with phase change material-epoxy composites: a review
Amberkar, T., & Mahanwar, P. A. (2023) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2023.2171514 · Cited by 23
Enhancing thermoregulation in double glazed windows with PCMs and black films: An experimental study
Mandev, E. (2024) · Energy and Buildings · doi:10.1016/j.enbuild.2024.115171 · Cited by 23

Authors: Li, D., Wu, Y., Wang, B., Liu, C., & Arıcı, M.
Affiliations: Northeast Petroleum University (CN)
Kocaeli Üniversitesi (TR)
Corresponding author: Li, Dong
ORCID: Li, Dong
Wu, Yangyang
Wang, Baichao
Liu, Changyu
Arıcı, Müslüm
Venue: Construction and Building Materials
Publisher: Elsevier BV
Published: 2020-02
Volume: 233
Pages: 117327
ISSN: 0950-0618 (ISSN-L)
DOI: 10.1016/j.conbuildmat.2019.117327
OpenAlex: W2981757296
Cited by: 216
References: 152
Citations by year: 2026: 12 · 2025: 19 · 2024: 38 · 2023: 36 · 2022: 26 · 2021: 53 · 2020: 32
FWCI: 15.61
Type: journal article
Language: en
Open access: closed
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
www.elsevier.com/legal/tdmrep-license (tdm)
Locations: Construction and Building Materials (publishedVersion)
Kocaeli Üniversitesi - AVESİS (submittedVersion)
Funders: Northeast Petroleum University
Topics: Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
Physical Sciences › Engineering › Building and Construction › Solar Energy Systems and Technologies
Physical Sciences › Engineering › Building and Construction › Building Energy and Comfort Optimization
Keywords: phase change materials, glazing units, windows, optical performance, thermal performance, solar energy storage, daylighting, thermal comfort, thermal simulation model

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.

Optical and thermal performance of glazing units containing PCM in buildings: A review

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks

Data sources