Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 230

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Effect of biochar on mechanical and permeability properties of concrete exposed to elevated temperature

Gupta, Souradeep, Kua, Harn Wei, Pang, Sze Dai · 2020 · Construction and Building Materials

Abstract

Although many inorganic fillers have been explored as supplementary cementitious admixtures, there is limited exploration into role of porous biochar, prepared from lignocellulosic biomass, in modifying mechanical and durability performance of structural grade concrete exposed to elevated temperature. This study investigates the effect of biochar particles, prepared by pyrolysis of woody biomass at 500 °C (BC 500), on mechanical strength (compressive, flexural and split-tensile strength) and permeability properties of concrete under normal condition (only wet-curing) and after exposure to high temperature (300 °C and 550 °C in this study) at 28-day age. Biochar was added at 0.50%, 1% and 2% by weight of cement in concrete. Thermal damage was inflicted to 28-day wet-cured concrete samples by placing in an electric kiln with residence time of 1 h (at steady state) and ramp rate of 5 °C/min. The strength and permeability performance of biochar-concrete composite were compared with plain concrete and concrete with 10 wt% silica fume (SF 10%) exposed to similar conditions. The findings show that addition of 0.50 wt% and 2 wt% of BC 500 increase 28-day compressive strength of concrete by 16% and 9% respectively compared to control mix, while 2 wt% addition led to reduction in permeability by 40%, measured by water sorptivity and water penetration test. After exposure to elevated temperature, addition of 1–2 wt% BC 500 to concrete is found to minimize thermal damage and retain 20% and 11% higher strength compared to control and concrete with silica fume respectively. Investigations show that biochar addition leads to lower damage to microstructure of concrete during thermal treatment, leading to 22–25% higher water tightness compared to control mix. The findings suggest that biochar from wood waste can be applied as a sustainable admixture and alternative to silica fume in order to improve compressive strength and durability of structure exposed to high temperature. Nevertheless, this can be also be an effective means to valorize lignocellulosic waste for high value construction applications.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.conbuildmat.2019.117338

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 6 references

Research works printed but not linked: 56

  1. Janotka, 2005, Effect of temperature on structural quality of the cement paste and high-strength concrete with silica fume, Nucl. Eng. Des., 235, 2019, 10.1016/j.nucengdes.2005.05.011 · DOI · Paper page
  2. Sakr, 2005, Effect of high temperature or fire on heavy weight concrete properties, Cem. Concr. Res., 35, 590, 10.1016/j.cemconres.2004.05.023 · DOI · Paper page
  3. Ali, 2004, Outcomes of a major research on fire resistance of concrete columns, Fire Safety J., 39, 433, 10.1016/j.firesaf.2004.02.004 · doi:10.1016/j.firesaf.2004.02.004
  4. Xiao, 2004, Study on concrete at high temperature in China—an overview, Fire Safety J., 39, 89, 10.1016/S0379-7112(03)00093-6 · DOI · Paper page
  5. Khoury, 2002, Modelling of heated concrete, Mag. Concr. Res., 54, 77, 10.1680/macr.2002.54.2.77 · DOI
  6. Serrano, 2016, Analysis of fire resistance of concrete with polypropylene or steel fibers, Constr. Build. Mater., 122, 302, 10.1016/j.conbuildmat.2016.06.055 · doi:10.1016/j.conbuildmat.2016.06.055
  7. Rostami, 2012, Microstructure of cement paste subject to early carbonation curing, Cem. Concr. Res., 42, 186, 10.1016/j.cemconres.2011.09.010 · DOI · Paper page
  8. Noumowe, 2005, Mechanical properties and microstructure of high strength concrete containing polypropylene fibres exposed to temperatures up to 200 C, Cem. Concr. Res., 35, 2192, 10.1016/j.cemconres.2005.03.007 · DOI · Paper page
  9. Uysal, 2012, Self-compacting concrete incorporating filler additives: Performance at high temperatures, Constr. Build. Mater., 26, 701, 10.1016/j.conbuildmat.2011.06.077 · doi:10.1016/j.conbuildmat.2011.06.077
  10. Hertz, 1992, Danish investigations on silica fume concretes at elevated temperatures, Mater. J., 89, 345
  11. Noumowe, 1996, Transient heating effect on high strength concrete, Nucl. Eng. Des., 166, 99, 10.1016/0029-5493(96)01235-6 · doi:10.1016/0029-5493(96)01235-6
  12. Saad, 1996, Effect of temperature on physical and mechanical properties of concrete containing silica fume, Cem. Concr. Res., 26, 669, 10.1016/S0008-8846(96)85002-2 · DOI · Paper page
  13. Memon, 2019, Durability of sustainable concrete subjected to elevated temperature–a review, Constr. Build. Mater., 199, 435, 10.1016/j.conbuildmat.2018.12.040 · DOI · Paper page
  14. Salahuddin, 2019, Effects of elevated temperature on performance of recycled coarse aggregate concrete, Constr. Build. Mater., 202, 415, 10.1016/j.conbuildmat.2019.01.011 · doi:10.1016/j.conbuildmat.2019.01.011
  15. Gupta, 2018, Application of biochar from food and wood waste as green admixture for cement mortar, Sci. Total Environ., 619–620, 419, 10.1016/j.scitotenv.2017.11.044 · DOI · Paper page
  16. Gupta, 2018, Effect of water entrainment by pre-soaked biochar particles on strength and permeability of cement mortar, Constr. Build. Mater., 159, 107, 10.1016/j.conbuildmat.2017.10.095 · DOI · Paper page
  17. Khushnood, 2016, Carbonized nano/microparticles for enhanced mechanical properties and electromagnetic interference shielding of cementitious materials, Front. Struct. Civil Eng., 10, 209, 10.1007/s11709-016-0330-5 · DOI
  18. Mo, 2019, Combined effects of biochar and MgO expansive additive on the autogenous shrinkage, internal relative humidity and compressive strength of cement pastes, Constr. Build. Mater., 229, 10.1016/j.conbuildmat.2019.116877 · DOI
  19. Dixit, 2019, Waste Valorisation using biochar for cement replacement and internal curing in ultra-high performance concrete, J. Cleaner Prod., 10.1016/j.jclepro.2019.117876 · DOI · Paper page
  20. Choi, 2012, Mechanical properties of mortar containing bio-char from pyrolysis, J. Korea Inst. Struct. Maint. Inspection, 16, 67
  21. Parihar, 2017, Investigation of functional group changes in biomass during slow pyrolysis using synchrotron based infra-red microspectroscopy and thermogravimetry-infra-red spectroscopy, J. Anal. Appl. Pyrol., 127, 394, 10.1016/j.jaap.2017.07.010 · DOI
  22. Gupta, 2018, Biochar-mortar composite: manufacturing, evaluation of physical properties and economic viability, Constr. Build. Mater., 167, 874, 10.1016/j.conbuildmat.2018.02.104 · DOI · Paper page
  23. Meddah, 2018, Performances evaluation of binary concrete designed with silica fume and metakaolin, Constr. Build. Mater., 166, 400, 10.1016/j.conbuildmat.2018.01.138 · doi:10.1016/j.conbuildmat.2018.01.138
  24. Pedro, 2017, Evaluation of high-performance concrete with recycled aggregates: use of densified silica fume as cement replacement, Constr. Build. Mater., 147, 803, 10.1016/j.conbuildmat.2017.05.007 · DOI · Paper page
  25. Neville, 1998, High performance concrete—an overview, Mater. Struct., 31, 111, 10.1007/BF02486473 · DOI · Paper page
  26. Gupta, 2017, Factors determining the potential of biochar as a carbon capturing and sequestering construction material: a critical review, J. Mater. Civ. Eng., 29, 1, 10.1061/(ASCE)MT.1943-5533.0001924 · DOI · Paper page
  27. Gupta, 2017, Use of biochar-coated polypropylene fibers for carbon sequestration and physical improvement of mortar, Cem. Concr Compos., 10.1016/j.cemconcomp.2017.07.012 · DOI · Paper page
  28. Shaaban, 2013, Characterization of biochar derived from rubber wood sawdust through slow pyrolysis on surface porosities and functional groups, Procedia Eng., 68, 365, 10.1016/j.proeng.2013.12.193 · DOI · Paper page
  29. Jiang, 2007, Rapid prediction of wood crystallinity in Pinus elliotii plantation wood by near-infrared spectroscopy, J. Wood Sci., 53, 449, 10.1007/s10086-007-0883-y · DOI
  30. Gupta, 2018, Application of biochar from food and wood waste as green admixture for cement mortar, Sci. Total Environ., 619, 419, 10.1016/j.scitotenv.2017.11.044 · DOI · Paper page
  31. Awal, 2015, Performance evaluation of concrete containing high volume palm oil fuel ash exposed to elevated temperature, Constr. Build. Mater., 76, 214, 10.1016/j.conbuildmat.2014.12.001 · doi:10.1016/j.conbuildmat.2014.12.001
  32. Alarcon-Ruiz, 2005, The use of thermal analysis in assessing the effect of temperature on a cement paste, Cem. Concr. Res., 35, 609, 10.1016/j.cemconres.2004.06.015 · DOI · Paper page
  33. Alonso, 2004, Dehydration and rehydration processes of cement paste exposed to high temperature environments, J. Mater. Sci., 39, 3015, 10.1023/B:JMSC.0000025827.65956.18 · DOI · Paper page
  34. Castellote, 2004, Composition and microstructural changes of cement pastes upon heating, as studied by neutron diffraction, Cem. Concr. Res., 34, 1633, 10.1016/S0008-8846(03)00229-1 · DOI
  35. Aydın, 2007, Effect of pumice and fly ash incorporation on high temperature resistance of cement based mortars, Cem. Concr. Res., 37, 988, 10.1016/j.cemconres.2007.02.005 · DOI · Paper page
  36. Mindess, 2003, Concrete
  37. Chen, 2013, Influence of porosity on compressive and tensile strength of cement mortar, Constr. Build. Mater., 40, 869, 10.1016/j.conbuildmat.2012.11.072 · DOI · Paper page
  38. Chan, 2000, Durability of concrete with high cement replacement, Cem. Concr. Res., 30, 865, 10.1016/S0008-8846(00)00253-2 · DOI
  39. Gupta, 2018, Use of biochar as carbon sequestering additive in cement mortar, Cem. Concr. Compos., 87, 110, 10.1016/j.cemconcomp.2017.12.009 · DOI · Paper page
  40. Luping, 1986, A study of the quantitative relationship between strength and pore-size distribution of porous materials, Cem. Concr. Res., 16, 87, 10.1016/0008-8846(86)90072-4 · doi:10.1016/0008-8846(86)90072-4
  41. Nambiar, 2007, Air-void characterisation of foam concrete, Cem. Concr. Res., 37, 221, 10.1016/j.cemconres.2006.10.009 · DOI
  42. Khoury, 1992, Compressive strength of concrete at high temperatures: a reassessment, Mag. Concr. Res., 44, 291, 10.1680/macr.1992.44.161.291 · DOI · Paper page
  43. Lin, 1996, Microstructures of fire-damaged concrete, Mater. J., 93, 199
  44. Ranjbar, 2014, Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar under elevated temperatures, Constr. Build. Mater., 65, 114, 10.1016/j.conbuildmat.2014.04.064 · DOI · Paper page
  45. Kong, 2007, Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures, Cem. Concr. Res., 37, 1583, 10.1016/j.cemconres.2007.08.021 · DOI · Paper page
  46. BaZant, 1979, Pore pressure in heated concrete walls: theoretical prediction, Mag. Concr. Res., 31, 67, 10.1680/macr.1979.31.107.67 · doi:10.1680/macr.1979.31.107.67
  47. Bangi, 2011, Pore pressure development in hybrid fibre-reinforced high strength concrete at elevated temperatures, Cem. Concr. Res., 41, 1150, 10.1016/j.cemconres.2011.07.001 · DOI
  48. Poon, 2003, Performance of metakaolin concrete at elevated temperatures, Cem. Concr. Compos., 25, 83, 10.1016/S0958-9465(01)00061-0 · DOI · Paper page
  49. Das, 2015, Structure–mechanics property relationship of waste derived biochars, Sci. Total Environ., 538, 611, 10.1016/j.scitotenv.2015.08.073 · DOI · Paper page
  50. Chen, 2009, Experimental study of mechanical properties of normal-strength concrete exposed to high temperatures at an early age, Fire Saf. J., 44, 997, 10.1016/j.firesaf.2009.06.007 · doi:10.1016/j.firesaf.2009.06.007
  51. Li, 2004, Mechanical properties of high-strength concrete after fire, Cem. Concr. Res., 34, 1001, 10.1016/j.cemconres.2003.11.007 · DOI · Paper page
  52. Kou, 2014, Residue strength, water absorption and pore size distributions of recycled aggregate concrete after exposure to elevated temperatures, Cem. Concr. Compos., 53, 73, 10.1016/j.cemconcomp.2014.06.001 · doi:10.1016/j.cemconcomp.2014.06.001
  53. Espinoza-Hijazin, 2011, Extending internal curing to concrete mixtures with W/C higher than 0.42, Constr. Build. Mater., 25, 1236, 10.1016/j.conbuildmat.2010.09.031 · DOI
  54. Chan, 1999, Residual strength and pore structure of high-strength concrete and normal strength concrete after exposure to high temperatures, Cem. Concr. Compos., 21, 23, 10.1016/S0958-9465(98)00034-1 · DOI · Paper page
  55. Yang, 2006, Water transport in concrete damaged by tensile loading and freeze–thaw cycling, J. Mater. Civ. Eng., 18, 424, 10.1061/(ASCE)0899-1561(2006)18:3(424) · doi:10.1061/(asce)0899-1561(2006)18:3(424
  56. Du, 2015, Enhancement of barrier properties of cement mortar with graphene nanoplatelet, Cem. Concr. Res., 76, 10, 10.1016/j.cemconres.2015.05.007 · DOI

Cited by

See all 230

Metadata

Authors
Gupta, S., Kua, H. W., & Pang, S. D.
Venue
Construction and Building Materials
Publisher
Elsevier BV
Published
2020-02
Volume
234
Pages
117338
ISSN
0950-0618 (ISSN-L)
OpenAlex
W2987194267
Cited by
230
References
6
FWCI
10.28
Type
journal article
Language
en
Open access
closed
Licence
  • www.elsevier.com/tdm/userlicense/1.0/ (tdm)
  • www.elsevier.com/legal/tdmrep-license (tdm)
Funders
Ministry of Education - Singapore (R-296-000-163-112)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Effect of biochar on mechanical and permeability properties of concrete exposed to elevated temperature. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2019.117338
The paper
Gupta, S., Kua, H. W., & Pang, S. D. (2020). Effect of biochar on mechanical and permeability properties of concrete exposed to elevated temperature. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2019.117338

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.