The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Development of high strength one-part geopolymer mortar using sodium metasilicate
Abstract
In this study, the solid activator – the synthetic sodium metasilicate pentahydrate – was compared against water and a hybrid sodium silicate and sodium hydroxide activator solution. It was found that the solid activator outperformed the liquid activator as a part of water remained chemically bound to the undissolved particles, thus reducing the apparent water to binder ratio. Contrary to the liquid activator, the increase in activator content past a certain limit did not correspond to improvement in strength. Instead, the compressive strength reduced and the risk of efflorescence increased significantly. Scanning electron microscopy (SEM) analysis showed that the denser reaction products took up less volume and formed a shell as the remaining metasilicate particles gradually dissolved under moisture ingression. This would eventually develop into a void, and cause strength- and durability-related issues. Additionally, fly ash content, microsilica addition, particle size of the activator, binder content, water to binder content and curing condition also played an important role in the hardening and pore refinement of the mixes. The one-part synthesis method could improve the safety and efficiency in geopolymer production.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Bernal, S. A., Provis, J. L., Walkley, B., San Nicolas, R., Gehman, J. D., Brice, D. G., Kilcullen, A. R., Duxson, P., & van Deventer, J. S. J. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.06.007 · Cited by 1,019
Cited by
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
John, S. K., Nadir, Y., & Girija, K. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122443 · Cited by 290
Rubberized geopolymer composites: A comprehensive review
Qaidi, S. M. A., Mohammed, A. S., Ahmed, H. U., Faraj, R. H., Emad, W., Tayeh, B. A., Althoey, F., Zaid, O., & Sor, N. H. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.06.123 · Cited by 256
Metadata
- Authors
- Dong, M., Elchalakani, M., & Karrech, A.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 236
- Pages
- 117611
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2990630667
- Cited by
- 187
- References
- 2
- FWCI
- 11.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Development of high strength one-part geopolymer mortar using sodium metasilicate. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2019.117611
- The paper
- Dong, M., Elchalakani, M., & Karrech, A. (2020). Development of high strength one-part geopolymer mortar using sodium metasilicate. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2019.117611
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.