The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Correlation between pore structure, compressive strength and thermal conductivity of porous metakaolin geopolymer
Abstract
Abstract This paper investigates the effect of mixing parameters (that are, alkali concentration, AA ratio, and MK/AA ratio) on the thermal conductivity of metakaolin geopolymers. The combination effect of foaming agent (H2O2) and surfactant (Tween 80) on the physical properties, compressive strength, and pore characteristic was also elucidated. Results showed that metakaolin geopolymer with maximum compressive strength of 33 MPa, bulk density of 1680 kg/m3, porosity of 18% and thermal conductivity of 0.40 W/mK were achieved with alkali concentration of 10 M, AA ratio of 1.0 and MK/AA ratio of 0.8. Gradation analysis demonstrated that AA ratio was the strength determining factor. Whilst, thermal conductivity was dependent on the MK/AA ratio. Adding H2O2 and surfactant produced geopolymer foam with acceptable compressive strength (0.4–6 MPa). The geopolymer foam had bulk density of 471–1212 kg/m3, porosity of 36–86% and thermal conductivity of 0.11–0.30 W/mK. Pore structure, size, and distribution were governed by H2O2 and surfactant dosages that have a great impact on the compressive strength. Narrower pore distribution and smaller pore diameter were achieved when both foaming agent and surfactant were used instead of foaming agent alone. The pore size and distribution varied to a greater extent with varying H2O2 contents. Surfactant illustrated distinct pore stabilizing effect at low H2O2 (
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ashby, M., Evans, A., Fleck, N., Gibson, L., Hutchinson, J., Wadley, H., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,694
Ashby, M. F., Evans, A., Fleck, N. A., Gibson, L. J., Hutchinson, J. W., & Wadley, H. N. G. (2002) · Materials & Design · doi:10.1016/s0261-3069(01)00049-8 · Cited by 2,367
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Structure and properties of aerated concrete: a review
Narayanan, N., & Ramamurthy, K. (2000) · Cement and Concrete Composites · doi:10.1016/s0958-9465(00)00016-0 · Cited by 962
Geopolymeric materials prepared using Class F fly ash and elevated temperature curing
Bakharev, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.031 · Cited by 946
Geopolymer foam concrete: An emerging material for sustainable construction
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.01.081 · Cited by 879
Görhan, G., & Kürklü, G. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.10.082 · Cited by 637
Durability evaluation of geopolymer and conventional concretes
Albitar, M., Mohamed Ali, M. S., Visintin, P., & Drechsler, M. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.01.056 · Cited by 629
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.03.013 · Cited by 605
Synthesis and mechanical properties of metakaolinite-based geopolymer
Wang, H., Li, H., & Yan, F. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.01.016 · Cited by 515
Metadata
- Authors
- Jaya, N. A., Yun-Ming, L., Cheng-Yong, H., Abdullah, M. M. A. B., & Hussin, K.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 247
- Pages
- 118641
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W3009309864
- Cited by
- 261
- References
- 50
- FWCI
- 17.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Correlation between pore structure, compressive strength and thermal conductivity of porous metakaolin geopolymer. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2020.118641
- The paper
- Jaya, N. A., Yun-Ming, L., Cheng-Yong, H., Abdullah, M. M. A. B., & Hussin, K. (2020). Correlation between pore structure, compressive strength and thermal conductivity of porous metakaolin geopolymer. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2020.118641
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.