The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Correlation between pore structure, compressive strength and thermal conductivity of porous metakaolin geopolymer
Abstract
This paper investigates the effect of mixing parameters (that are, alkali concentration, AA ratio, and MK/AA ratio) on the thermal conductivity of metakaolin geopolymers. The combination effect of foaming agent (H2O2) and surfactant (Tween 80) on the physical properties, compressive strength, and pore characteristic was also elucidated. Results showed that metakaolin geopolymer with maximum compressive strength of 33 MPa, bulk density of 1680 kg/m3, porosity of 18% and thermal conductivity of 0.40 W/mK were achieved with alkali concentration of 10 M, AA ratio of 1.0 and MK/AA ratio of 0.8. Gradation analysis demonstrated that AA ratio was the strength determining factor. Whilst, thermal conductivity was dependent on the MK/AA ratio. Adding H2O2 and surfactant produced geopolymer foam with acceptable compressive strength (0.4–6 MPa). The geopolymer foam had bulk density of 471–1212 kg/m3, porosity of 36–86% and thermal conductivity of 0.11–0.30 W/mK. Pore structure, size, and distribution were governed by H2O2 and surfactant dosages that have a great impact on the compressive strength. Narrower pore distribution and smaller pore diameter were achieved when both foaming agent and surfactant were used instead of foaming agent alone. The pore size and distribution varied to a greater extent with varying H2O2 contents. Surfactant illustrated distinct pore stabilizing effect at low H2O2 (
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ashby, M., Evans, A., Fleck, N., Gibson, L., Hutchinson, J., Wadley, H., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,694
Ashby, M. F., Evans, A., Fleck, N. A., Gibson, L. J., Hutchinson, J. W., & Wadley, H. N. G. (2002) · Materials & Design · doi:10.1016/s0261-3069(01)00049-8 · Cited by 2,367
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Structure and properties of aerated concrete: a review
Narayanan, N., & Ramamurthy, K. (2000) · Cement and Concrete Composites · doi:10.1016/s0958-9465(00)00016-0 · Cited by 962
Geopolymeric materials prepared using Class F fly ash and elevated temperature curing
Bakharev, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.031 · Cited by 946
Geopolymer foam concrete: An emerging material for sustainable construction
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.01.081 · Cited by 879
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.03.013 · Cited by 651
Görhan, G., & Kürklü, G. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.10.082 · Cited by 637
Durability evaluation of geopolymer and conventional concretes
Albitar, M., Mohamed Ali, M. S., Visintin, P., & Drechsler, M. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.01.056 · Cited by 629
Synthesis and mechanical properties of metakaolinite-based geopolymer
Wang, H., Li, H., & Yan, F. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.01.016 · Cited by 515
Rowles, M., & O'Connor, B. (2003) · Journal of Materials Chemistry · doi:10.1039/b212629j · Cited by 485
Wan, Q., Rao, F., Song, S., García, R. E., Estrella, R. M., Patiño, C. L., & Zhang, Y. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.01.014 · Cited by 481
Synthesis and strength optimization of one-part geopolymer based on red mud
Ye, N., Yang, J., Liang, S., Hu, Y., Hu, J., Xiao, B., & Huang, Q. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.099 · Cited by 363
Geopolymer-zeolite composites: A review
Rożek, P., Król, M., & Mozgawa, W. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.152 · Cited by 361
Atiş, C. D., Görür, E. B., Karahan, O., Bilim, C., İlkentapar, S., & Luga, E. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.089 · Cited by 329
A comparison between different foaming methods for the synthesis of light weight geopolymers
Masi, G., Rickard, W. D. A., Vickers, L., Bignozzi, M. C., & van Riessen, A. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.05.108 · Cited by 312
Preparation and Properties of Alkali Activated Metakaolin-Based Geopolymer
Chen, L., Wang, Z., Wang, Y., & Feng, J. (2016) · Materials · doi:10.3390/ma9090767 · Cited by 263
Lightweight concretes of activated metakaolin-fly ash binders, with blast furnace slag aggregates
Aguilar, R. A., Burciaga-Díaz, O., & Escalante-Garcia, J. I. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.12.024 · Cited by 250
Reaction mechanism, kinetics and high temperature transformations of geopolymers
Rahier, H., Wastiels, J., Biesemans, M., Willlem, R., Assche, G. V., & Mele, B. V. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-0568-8 · Cited by 236
Thermal insulating foamy geopolymers from perlite
Vaou, V., & Panias, D. (2010) · Minerals Engineering · doi:10.1016/j.mineng.2010.07.015 · Cited by 235
Leong, H. Y., Ong, D. E. L., Sanjayan, J. G., & Nazari, A. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.141 · Cited by 234
Porous biomass fly ash-based geopolymers with tailored thermal conductivity
Novais, R. M., Buruberri, L. H., Ascensão, G., Seabra, M. P., & Labrincha, J. A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.01.083 · Cited by 225
Yaseri, S., Hajiaghaei, G., Mohammadi, F., Mahdikhani, M., & Farokhzad, R. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.09.102 · Cited by 203
Evaluation of thermal conductivity for thermally insulated concretes
Yun, T. S., Jeong, Y. J., Han, T.-S., & Youm, K.-S. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.01.043 · Cited by 187
Kamseu, E., Nait-Ali, B., Bignozzi, M. C., Leonelli, C., Rossignol, S., & Smith, D. S. (2012) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.12.030 · Cited by 187
Physical and mechanical properties of lightweight aerated geopolymer
Sanjayan, J. G., Nazari, A., Chen, L., & Nguyen, G. H. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.043 · Cited by 176
Spectroscopic studies of fly ash-based geopolymers
Rożek, P., Król, M., & Mozgawa, W. (2018) · Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2018.03.034 · Cited by 168
Alkali activated slag foams: The effect of the alkali reaction on foam characteristics
Hajimohammadi, A., Ngo, T., Mendis, P. A., Kashani, A., & van Deventer, J. S. J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.01.134 · Cited by 166
Nguyen, T., Bui, H. H., Ngo, T., Nguyen, G. D., Kreher, M. U., & Darve, F. (2019) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2019.01.033 · Cited by 166
Regulating the chemical foaming reaction to control the porosity of geopolymer foams
Hajimohammadi, A., Ngo, T., Mendis, P., & Sanjayan, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.026 · Cited by 159
Subaer, S., & van Riessen, A. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-0522-9 · Cited by 138
Duxson, P., Lukey, G. C., & van Deventer, J. S. J. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060187o · Cited by 134
Combination formation in the reinforcement of metakaolin geopolymers with quartz sand
Wan, Q., Rao, F., Song, S., Cholico-González, D. F., & Lara, N. O. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.03.005 · Cited by 133
New synthesis method for the production of coal fly ash-based foamed geopolymers
Böke, N., Birch, G. D., Nyale, S. M., & Petrik, L. F. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.07.041 · Cited by 129
Thermal properties of novel binary geopolymers based on metakaolin and alternative silica sources
Villaquirán‐Caicedo, M. A., de Gutiérrez, R. M., Sulekar, S. S., Davis, C. G., & Nino, J. C. (2015) · Applied Clay Science · doi:10.1016/j.clay.2015.10.005 · Cited by 125
Cui, Y., Wang, D., Zhao, J., Li, D., Ng, S., & Rui, Y. (2018) · Journal of Building Engineering · doi:10.1016/j.jobe.2018.06.002 · Cited by 125
Wu, J., Zhang, Z., Zhang, Y., & Li, D. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.02.097 · Cited by 114
Korat, L., & Ducman, V. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.03.010 · Cited by 110
Yan, S. M., Zhang, F., Liu, J., Ren, B., He, P., Jia, D., & Yang, J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.185 · Cited by 104
Thermomechanical performance of blended metakaolin-GGBS alkali-activated foam concrete
Samson, G., Cyr, M., & Gao, X. X. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.09.146 · Cited by 102
Potassium alkali concentration and heat treatment affected metakaolin-based geopolymer
Tippayasam, C., Balyore, P., Thavorniti, P., Kamseu, E., Leonelli, C., Chindaprasirt, P., & Chaysuwan, D. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.11.027 · Cited by 90
Microstructure and integrity of leucite ceramic derived from potassium-based geopolymer precursor
He, P., Jia, D., & Wang, S. (2012) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2012.10.019 · Cited by 79
Kamseu, E., Ceron, B., Tobias, H., et al. (2011) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-011-1798-9 · Cited by 77
Correlating the elastic properties of metakaolin-based geopolymer with its composition
Yan, D., Chen, S., Zeng, Q., Xu, S., & Li, H. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.107 · Cited by 77
Duan, P., Song, L., Yan, C., Ren, D., & Li, Z. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.01.025 · Cited by 76
Glid, M., Sobrados, I., Rhaiem, H. B., Sanz, J., & Amara, A. B. H. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.06.144 · Cited by 67
Effect of activator and curing mode on fly ash-based geopolymers
Hou, Y., Wang, D., Zhou, W., Lu, H., & Wang, L. (2009) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-009-5711-3 · Cited by 64
Fongang, R. T. T., Pemndje, J., Lemougna, P. N., Melo, U. C., Nanseu‐Njiki, C. P., Naït‐Ali, B., Kamseu, E., & Leonelli, C. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.08.009 · Cited by 61
Beghoura, I., & Castro-Gomes, J. P. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.018 · Cited by 44
Damping and microstructure of fly ash-based geopolymers
Pan, Z., Feng, K., Gong, K., Zou, B., Korayem, A. H., Sanjayan, J., Duan, W., & Collins, F. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-7090-y · Cited by 36
Metadata
- Authors
- Jaya, N. A., Yun-Ming, L., Cheng-Yong, H., Abdullah, M. M. A. B., & Hussin, K.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 247
- Pages
- 118641
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W3009309864
- Cited by
- 261
- References
- 50
- FWCI
- 17.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.