The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers
Abstract
The aim of this study is to investigate the effects of using recycled concrete aggregate (RCA) and pozzolanic materials as a partial replacement of natural coarse aggregate (NCA) and cement, respectively, on the mechanical and permeability properties of fiber-reinforced pervious concrete mixes. For this purpose, mixes were prepared with 25%, 50%, 75%, and 100% (by weight) RCA as coarse aggregate, and cement was partially replaced with 10% silica fume (SF) and 1%, 2%, and 3% nano-clay (NC). In order to enhance the mechanical strength of mixes, steel fiber (STF) and waste plastic fiber (WPF) were incorporated in the mixtures at a volume fraction of 1% and 2%. The experiments were carried out on a total number of 2310 samples casted from 110 mixes. Based on the test results, up to 25% increase in permeability and about 60% reduction in strength properties of mix incorporating 100% RCA were observed. The use of SF and NC led to enhancements in the strength properties because of micro-filling ability and pozzolanic reactivity. In general, the addition of fibers enhanced both compressive and flexural strengths up to 65% and 79%, respectively, over that of the unreinforced counterpart mix by incorporating 2% STF. WPF-reinforced mixes showed inferior performance compared to the STF-reinforced counterparts, due to the low quality and poor dispersion of WPF in mixes. It was found that, incorporating 100% RCA combined with 2% STF and 2% NC yields a pervious concrete suitable for structural applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
2 retracted
Zareei, S. A., Ameri, F., Shoaei, P., & Bahrami, N. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.12.161 · Cited by 126
RetractedZamanabadi, S. N., Zareei, S. A., Shoaei, P., & Ameri, F. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116911 · Cited by 87
RetractedA review of recycled aggregate in concrete applications (2000–2017)
Tam, V. W. Y., Soomro, M., & Evangelista, A. C. J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.240 · Cited by 1,235
Afroughsabet, V., & Ozbakkaloglu, T. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.06.051 · Cited by 881
Applications of using nano material in concrete: A review
Sidek, M. N. M., Hamidah, M. S., & Fadzil, A. M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.12.005 · Cited by 570
On the mechanical properties of concrete containing waste PET particles
Rahmani, E., Dehestani, M., Beygi, M. H. A., Allahyari, H., & Nikbin, I. M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.06.041 · Cited by 458
Laboratory evaluation of permeability and strength of polymer-modified pervious concrete
Huang, B., Wu, H., Shu, X., & Burdette, E. G. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.10.025 · Cited by 444
Hybrid effect of carbon nanotube and nano-clay on physico-mechanical properties of cement mortar
Morsy, M. S., Alsayed, S. H., & Aqel, M. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.06.046 · Cited by 443
Use of silica fume and recycled steel fibers in self-compacting concrete (SCC)
Mastali, M., & Dalvand, A. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.046 · Cited by 257
Li, W., Long, C., Tam, V. W. Y., Poon, C.-S., & Hui Duan, W. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.03.051 · Cited by 247
Sustainable design of pervious concrete using waste glass and recycled concrete aggregate
Lu, J., Yan, X., He, P., & Poon, C. S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.06.260 · Cited by 236
Mechanical properties of the concrete containing recycled fibers and aggregates
Ahmadi, M., Farzin, S., Hassani, A., & Motamedi, M. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.03.215 · Cited by 218
Al-Hadithi, A. I., & Hilal, N. N. (2016) · Journal of Building Engineering · doi:10.1016/j.jobe.2016.06.011 · Cited by 212
Effects of the pozzolanic reactivity of nanoSiO2 on cement-based materials
Hou, P., Qian, J., Cheng, X., & Shah, S. P. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.09.014 · Cited by 206
The effects of nano particles on freeze and thaw resistance of alkali-activated slag concrete
Shahrajabian, F., & Behfarnia, K. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.033 · Cited by 206
Green Concrete mix using solid waste and nanoparticles as alternatives – A review
Vishwakarma, V., & Ramachandran, D. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.174 · Cited by 192
Bui, N. K., Satomi, T., & Takahashi, H. (2018) · Waste Management · doi:10.1016/j.wasman.2018.05.035 · Cited by 182
Hassani Niaki, M., Fereidoon, A., & Ghorbanzadeh Ahangari, M. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.02.063 · Cited by 176
Shariati, M., Mafipour, M. S., Mehrabi, P., Ahmadi, M., Wakil, K., Nguyen-Thoi, T., & Toghroli, A. (2020) · Smart Structures and Systems · doi:10.12989/sss.2020.25.2.183 · Cited by 176
Self-citationProperties of porous concrete from waste crushed concrete (recycled aggregate)
Aamer Rafique Bhutta, M., Hasanah, N., Farhayu, N., Hussin, M. W., Tahir, M. B. M., & Mirza, J. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.06.022 · Cited by 173
Characteristics of nanoclay and calcined nanoclay-cement nanocomposites
Hakamy, A. A., Shaikh, F. U. A., & Low, I. M. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.03.074 · Cited by 170
Mechanical properties and impact behavior of PET fiber reinforced self-compacting concrete (SCC)
Al-Hadithi, A. I., Noaman, A. T., & Mosleh, W. K. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.111021 · Cited by 169
Shi, X., Mukhopadhyay, A., Zollinger, D., & Grasley, Z. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.288 · Cited by 166
Said, S. H., & Razak, H. A. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.125 · Cited by 163
Optimum rice husk ash content and bacterial concentration in self-compacting concrete
Ameri, F., Shoaei, P., Bahrami, N., Vaezi, M., & Ozbakkaloglu, T. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.06.190 · Cited by 162
Ameri, F., Shoaei, P., Zareei, S. A., & Behforouz, B. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.06.079 · Cited by 158
Shoaei, P., Musaeei, H. R., Mirlohi, F., Zamanabadi, S. N., Ameri, F., & Bahrami, N. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116686 · Cited by 157
Fresh and strength properties of concrete reinforced with metalized plastic waste fibers
Bhogayata, A., & Arora, N. K. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.095 · Cited by 155
Effect of nano-clay de-agglomeration on mechanical properties of concrete
Hamed, N., El-Feky, M. S., Kohail, M., et al. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.02.018 · Cited by 148
Influence of nano materials on flexural behavior and compressive strength of concrete
Mohamed, A. M. (2015) · HBRC Journal · doi:10.1016/j.hbrcj.2014.11.006 · Cited by 147
A review on pavement porous concrete using recycled waste materials
Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z. B., Koting, S. B., Mohamad, E. T., & Khorami, M. (2018) · Smart Structures and Systems · doi:10.12989/sss.2018.22.4.433 · Cited by 145
Self-citationWang, H., Li, H., Liang, X. J., Zhou, H., Xie, N., & Dai, Z. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.044 · Cited by 139
Lu, G., Liu, P., Wang, Y., Faßbender, S., Wang, D., & Oeser, M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.184 · Cited by 134
Effect of Pozzolanic Additives on the Strength Development of High Performance Concrete
Dembovska, L., Bajāre, D., Pundienė, I., & Vītola, L. (2017) · Procedia Engineering · doi:10.1016/j.proeng.2017.02.050 · Cited by 116
Hybrid ANN-based techniques in predicting cohesion of sandy-soil combined with fiber
Armaghani, D. J., Mirzaei, F., Shariati, M., Nguyen-Thoi, T., Shariati, M., & Trnavac, D. (2020) · Geomechanics and Engineering · doi:10.12989/gae.2020.20.3.191 · Cited by 108
Self-citationKumar, R. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.03.077 · Cited by 107
Hosseini, P., Hosseinpourpia, R., Arash, P., Khodavirdi, M. M., Izadi, H., & Vaezi, A. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.05.047 · Cited by 105
Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete
Li, D., Toghroli, A., Shariati, M., Sajedi, F., Bui, D. T., Kianmehr, P., Mohamad, E. T., & Khorami, M. (2019) · Smart Structures and Systems · doi:10.12989/sss.2019.23.2.207 · Cited by 93
Self-citationCharacteristics of hemp fabric reinforced nanoclay–cement nanocomposites
Hakamy, A. A., Shaikh, F. U. A., & Low, I. M. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.03.002 · Cited by 84
Shariati, M., Rafiei, S., Mehrabi, P., Zandi, Y., Fooladvand, R., Gharehaghaj, B., Shariati, A., Nguyen-Thoi, T., Salih, M. N. A., & Shek, P. N. (2019) · Advances in concrete construction · doi:10.12989/acc.2019.8.3.225 · Cited by 76
Self-citationEffect of intumescent paint coating on mechanical properties of FRP bars at elevated temperature
Khaneghahi, M. H., Najafabadi, E. P., Shoaei, P., et al. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.08.020 · Cited by 67
A study on the effect of nano clay and GGBS on the strength properties of fly ash based geopolymers
Ravitheja, A., & Kumar, N. L. N. K. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.06.761 · Cited by 65
A review of nanoclay applications in the pervious concrete pavement
Shakrani, S. A., Ayob, A., & Rahim, M. A. A. (2017) · AIP conference proceedings · doi:10.1063/1.5002243 · Cited by 21
Cited by
Shariati, M., Mafipour, M. S., Ghahremani, B., Azarhomayun, F., Ahmadi, M., Trung, N. T., & Shariati, A. (2022) · Engineering with Computers · doi:10.1007/s00366-020-01081-0 · Cited by 367
Self-citationShahmansouri, A. A., Yazdani, M., Ghanbari, S., Akbarzadeh Bengar, H., Jafari, A., & Farrokh Ghatte, H. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123697 · Cited by 353
Clayey soil stabilization using alkali-activated volcanic ash and slag
Miraki, H., Shariatmadari, N., Ghadir, P., Jahandari, S., Tao, Z., & Siddique, R. (2022) · Journal of Rock Mechanics and Geotechnical Engineering · doi:10.1016/j.jrmge.2021.08.012 · Cited by 276
Self-citationBiopolymers as Green Binders for Soil Improvement in Geotechnical Applications: A Review
Fatehi, H., Ong, D. E. L., Yu, J., & Chang, I. (2021) · Geosciences · doi:10.3390/geosciences11070291 · Cited by 261
Metadata
- Authors
- Toghroli, A., Mehrabi, P., Shariati, M., Trung, N. T., Jahandari, S., & Rasekh, H.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 252
- Pages
- 118997
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W3016316326
- Cited by
- 287
- References
- 43
- FWCI
- 22.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.