The DOI matches its Crossref record.
Using silica fume for improvement of fly ash/slag based geopolymer activated with calcium carbide residue and gypsum
Abstract
Abstract This study attempts to explore the feasibility of using calcium carbide residue (CCR) as a solid alkaline activator to prepare geopolymer binders. A mixture of fly ash and ground granulated blast furnace slag was activated with CCR to prepare one-part geopolymer. A conventional two-part geopolymer activated with sodium hydroxide (NaOH) solution was also made for comparison. The CCR-activated geopolymer with the highest compressive strength was selected to incorporate silica fume to improve its mechanical properties. Effects of the activator type/amount, the ratio of silica fume replacement and the curing age on the properties of geopolymer binders were evaluated. Mechanical behavior was mainly assessed by compressive strength tests, and hydration products were analyzed by FTIR, XRD and SEM-EDX. Also, the content of Ca(OH)2 in the system was calculated using TGA technique to investigate the effects of silica fume on the pozzolanic reaction. The results revealed that the CCR had high potential as an activator for the preparation of geopolymer binders, and geopolymer activated with 12 wt% CCR had the highest compressive strength. Increasing the CCR dosage could improve the compressive strength, while the addition of excess CCR led to a risk of strength loss. When the activator dosage was less than 8 wt%, the mechanical strength of CCR-activated geopolymer was found to be comparable with that of the NaOH-activated geopolymer. Moreover, the addition of silica fume was proved to enhance the strength of CCR-activated geopolymer. TGA results and SEM images analysis illustrated that adding silica fume to CCR-activated binders could promote the consumption of excessive CCR, facilitate the formation of hydration products and modify the pore structure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Shi, Y., Zhao, Q., Xue, C., Jia, Y., Guo, W., Zhang, Y., & Qiu, Y. (2023) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2023.104999 · Cited by 296
Karthik, S., Saravana Raja Mohan, K., Murali, G., Abid, S. R., & Dixit, S. (2024) · Theoretical and Applied Fracture Mechanics · doi:10.1016/j.tafmec.2024.104751 · Cited by 25
Gu, X., Wang, X., Ge, X., Wang, S., Hu, Z., Wang, H., Liu, J., Zhang, X., & Wang, X. (2025) · Environmental Research · doi:10.1016/j.envres.2025.122309 · Cited by 24
Feng, Y., Li, F., Qi, W., Ren, Q., Qi, W., Duan, G., Zheng, K., Han, Y., & Pang, H. (2022) · Minerals · doi:10.3390/min12121549 · Cited by 20
Wang, T., Ju, F., Xiao, M., Wang, D., Yin, L., Si, L., Wang, Y., Xu, M., & Yang, D. (2025) · Materials · doi:10.3390/ma18174189 · Cited by 11
Metadata
- Authors
- Cong, P., & Mei, L.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2021-03
- Volume
- 275
- Pages
- 122171
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W3120168621
- Cited by
- 224
- References
- 0
- FWCI
- 16.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Using silica fume for improvement of fly ash/slag based geopolymer activated with calcium carbide residue and gypsum. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2020.122171
- The paper
- Cong, P., & Mei, L. (2021). Using silica fume for improvement of fly ash/slag based geopolymer activated with calcium carbide residue and gypsum. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2020.122171
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.