Biochar as a sustainable product for remediation of petroleum contaminated soil
Open accessThe DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Abstract
Globally, petroleum has been the largest source of energy consumption compared to other energy sources such as natural gas and coal. As a result of high demand for petroleum as an energy source, contamination takes place due to maintenance, production, exploration, storage, transportation and accidental release, yielding in substantial ecological impacts. The contaminations of petroleum in the presence of soil have a negative impact on human health and the development of plant growth. According to this, there is an imperative need to investigate on environmental-friendly remediation strategies to eliminate petroleum contaminants in soil. Among different remediation technologies, bioremediation is recognized as a clean soil treatment technology due to its advantages of safety, no secondary pollution, and economy. For bioremediation of contaminated soil, biochar (BC) applications may provide new solution for polluted soil problems. BC has displayed a good potential to remedy soil contaminants owed to its wide availability of the necessary feedstock, sustainable nature, cost-effective feasibility, high efficiency, large internal surface area and desirable physicochemical surface properties. The usage of BC may include sequestration of carbon, improvement fertility of soil, remediation, as well as recycling of agricultural waste. This paper provides a review on current properties and preparation of BC and its usage as an ameliorant, amendment or sorbent for remediation of contaminated soil. Different research and published papers in this field reveal that the potential of biochar for contaminated soil remediation relies on its physical and chemical properties, which are considerably influenced by the feedstocks, pyrolysis conditions and pyrolysis technologies. The results show that the pyrolysis conditions can affect the BC structure and composition and thus its adsorption capacity. Pyrolysis temperature influences the adsorption characteristics of BC by changing the surface functionality, surface area, pore distribution and mineral concentration of BC. It is important to produce BC at optimum pyrolysis temperatures to maximize inorganic and organic contaminant adsorption. The results also indicate that BC obtained through microwave pyrolysis has better yield and quality than those produced from conventional pyrolysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biochar as a sorbent for contaminant management in soil and water: A review
Ahmad, M., Rajapaksha, A. U., Lim, J. E., Zhang, M., Bolan, N., Mohan, D., Vithanage, M., Lee, S. S., & Ok, Y. S. (2014) · Chemosphere · doi:10.1016/j.chemosphere.2013.10.071 · Cited by 4,662
Preparation, modification and environmental application of biochar: A review
Wang, J., & Wang, S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.282 · Cited by 2,345
Application of biochar for the removal of pollutants from aqueous solutions
Tan, X., Liu, Y., Zeng, G., Wang, X., Hu, X., Gu, Y., & Yang, Z. (2015) · Chemosphere · doi:10.1016/j.chemosphere.2014.12.058 · Cited by 2,081
Biofuels Production through Biomass Pyrolysis—A Technological Review
Jahirul, M., Rasul, M., Chowdhury, A., & Ashwath, N. (2012) · Energies · doi:10.3390/en5124952 · Cited by 1,427
A review of biochar as a low-cost adsorbent for aqueous heavy metal removal
Inyang, M. I., Gao, B., Yao, Y., Xue, Y., Zimmerman, A., Mosa, A., Pullammanappallil, P., Ok, Y. S., & Cao, X. (2016) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2015.1096880 · Cited by 1,397
Rajapaksha, A. U., Chen, S. S., Tsang, D. C. W., Zhang, M., Vithanage, M., Mandal, S., Gao, B., Bolan, N. S., & Ok, Y. S. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2016.01.043 · Cited by 1,322
Effect of pyrolysis temperature, heating rate, and residence time on rapeseed stem derived biochar
Zhao, B., O'Connor, D., Zhang, J., Peng, T., Shen, Z., Tsang, D. C. W., & Hou, D. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.013 · Cited by 843
Prediction of heating values of biomass fuel from elemental composition
Friedl, A., Padouvas, E., Rotter, H., & Varmuza, K. (2005) · Analytica Chimica Acta · doi:10.1016/j.aca.2005.01.041 · Cited by 819
Angın, D. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.10.150 · Cited by 733
Ball milling as a mechanochemical technology for fabrication of novel biochar nanomaterials
Kumar, M., Xiong, X., Wan, Z., Sun, Y., Tsang, D. C. W., Gupta, J., Gao, B., Cao, X., Tang, J., & Ok, Y. S. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123613 · Cited by 561
Cited by
Incorporation of biochar in cementitious materials: A roadmap of biochar selection
Maljaee, H., Madadi, R., Paiva, H., Tarelho, L., & Ferreira, V. M. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122757 · Cited by 250
Self-citationRizwan, M., Murtaza, G., Zulfiqar, F., Moosa, A., Iqbal, R., Ahmed, Z., Irshad, S., Khan, I., Li, T., Chen, J., et al. (2023) · Frontiers in Environmental Science · doi:10.3389/fenvs.2023.1277240 · Cited by 60
Cheng, P.-C., Lin, M.-S., Huang, C.-Y., Cheng, S.-F., & Lin, Y.-C. (2025) · Journal of Environmental Management · doi:10.1016/j.jenvman.2025.126956 · Cited by 3
Metadata
- Authors
- Zahed, M. A., Salehi, S., Madadi, R., & Hejabi, F.
- Venue
- Current Research in Green and Sustainable Chemistry
- Publisher
- Elsevier BV
- Published
- 2021
- Volume
- 4
- Pages
- 100055
- ISSN
- 2666-0865 (ISSN-L)
- OpenAlex
- W3124240165
- Cited by
- 93
- References
- 18
- FWCI
- 3.63
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Biochar as a sustainable product for remediation of petroleum contaminated soil. https://app.cochat.ai/papers/10.1016/j.crgsc.2021.100055
- The paper
- Zahed, M. A., Salehi, S., Madadi, R., & Hejabi, F. (2021). Biochar as a sustainable product for remediation of petroleum contaminated soil. Current Research in Green and Sustainable Chemistry. https://doi.org/10.1016/j.crgsc.2021.100055
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.