The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Characterization of a polymer-infiltrated ceramic-network material
Open accessAbstract
Objectives To characterize the microstructure and determine some mechanical properties of a polymer-ingfiltrated ceramic-network (PICN) material (Vita Enamic, Vita Zahnfabrik) available for CAD–CAM systems. Methods Specimens were fabricated to perform quantitative and qualitative analyses of the material’s microstructure and to determine the fracture toughness (KIc), density (ρ), Poisson’s ratio (v) and Young’s modulus (E). KIc was determined using V-notched specimens and the short beam toughness method, where bar-shaped specimens were notched and 3-point loaded to fracture. ρ was calculated using Archimedes principle, and v and E were measured using an ultrasonic thickness gauge with a combination of a pulse generator and an oscilloscope. Results Microstructural analyses showed a ceramic- and a polymer-based interpenetrating network. Mean and standard deviation values for the properties evaluated were: KIc = 1.09 ± 0.05 MPa m1/2, ρ = 2.09 ± 0.01 g/cm3, v = 0.23 ± 0.002 and E = 37.95 ± 0.34 GPa. Significance The PICN material showed mechanical properties between porcelains and resin-based composites, reflecting its microstructural components.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Application of finite element analysis in implant dentistry: A review of the literature
Geng, J.-P., Tan, K. B. C., & Liu, G.-R. (2001) · The Journal of Prosthetic Dentistry · doi:10.1067/mpr.2001.115251 · Cited by 1,106
Current Trends in Dental Composites
Ferracane, J. L. (1995) · Critical Reviews in Oral Biology & Medicine · doi:10.1177/10454411950060040301 · Cited by 437
The Clinical Success Of All-Ceramic Restorations
Bona, Á. D., & Kelly, J. R. (2008) · The Journal of the American Dental Association · doi:10.14219/jada.archive.2008.0361 · Cited by 436
Fracture toughness of dental ceramics: comparison of bending and indentation method
Fischer, H. (2002) · Dental Materials · doi:10.1016/s0109-5641(01)00005-7 · Cited by 189
In-vitro strength degradation of dental ceramics and novel PICN material by sharp indentation
Coldea, A., Swain, M. V., & Thiel, N. (2013) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.05.004 · Cited by 156
Microstructural characterization and fracture behavior of a microhybrid and a nanofill composite
Rodrigues, S. A., Scherrer, S. S., Ferracane, J. L., et al. (2008) · Dental Materials · doi:10.1016/j.dental.2008.02.006 · Cited by 138
Petrini, M., Ferrante, M., & Su, B. (2013) · Dental Materials · doi:10.1016/j.dental.2012.12.004 · Cited by 90
Gonzaga, C. C., Yoshimura, H. N., Cesar, P. F., et al. (2008) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3667-z · Cited by 59
Cited by
Dental ceramics: a review of new materials and processing methods
SILVA, L. H. D., LIMA, E. D., MIRANDA, R. B. D. P., FAVERO, S. S., LOHBAUER, U., & CESAR, P. F. (2017) · Brazilian Oral Research · doi:10.1590/1807-3107bor-2017.vol31.0058 · Cited by 325
A literature review on the new polymer-infiltrated ceramic-network material (PICN)
Facenda, J. C., Borba, M., & Corazza, P. H. (2018) · Journal of Esthetic and Restorative Dentistry · doi:10.1111/jerd.12370 · Cited by 120
Self-citation
Metadata
- Authors
- Della Bona, A., Corazza, P. H., & Zhang, Y.
- Venue
- Dental Materials
- Publisher
- Elsevier BV
- Published
- 2014-05
- Volume
- 30
- Issue
- 5
- Pages
- 564-569
- ISSN
- 0109-5641 (ISSN-L)
- OpenAlex
- W2108752214
- Cited by
- 396
- References
- 8
- FWCI
- 37.99
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Characterization of a polymer-infiltrated ceramic-network material. https://app.cochat.ai/papers/10.1016/j.dental.2014.02.019
- The paper
- Della Bona, A., Corazza, P. H., & Zhang, Y. (2014). Characterization of a polymer-infiltrated ceramic-network material. Dental Materials. https://doi.org/10.1016/j.dental.2014.02.019
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
