The DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.
Additive manufacturing of ceramics for dental applications: A review
Abstract
OBJECTIVE The main goal of this review is to provide a detailed and comprehensive description of the published work from the past decade regarding AM of ceramic materials with possible applications in dentistry. The main printable materials and most common technologies are also addressed, underlining their advantages and main drawbacks. METHODS Online databases (Web of knowledge, Science Direct, PubMed) were consulted on this topic. Published work from 2008 to 2018 was collected, analyzed and the relevant papers were selected for inclusion on this review. RESULTS Ceramic materials are broadly used in dentistry to restore/replace damaged or missing teeth, due to their biocompatibility, chemical stability and mechanical and aesthetic properties. However, there are several unmet challenges regarding their processing and performance. Due to their brittleness nature, a very tight control of the manufacturing process is needed to obtain dental pieces with adequate mechanical properties. Additive manufacturing (AM) is an emerging technology that constitutes an interesting and viable manufacturing alternative to the conventional subtractive methods. AM enables the production of customized complex 3D parts in a more sustainable and less expensive way. AM of ceramics can be achieved with an extensive variety of methods. SIGNIFICANCE There is no perfect technology for all materials/applications, capable alone of fulfilling all the specificities and necessities of every patient. Although very promising, AM of ceramic dental materials remains understudied and further work is required to make it a widespread technology in dentistry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
State of the art of zirconia for dental applications
Denry, I., & Kelly, J. R. (2008) · Dental Materials · doi:10.1016/j.dental.2007.05.007 · Cited by 2,133
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
Phase Analysis in Zirconia Systems
Garvie, R. C., & Nicholson, P. S. (1972) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1972.tb11290.x · Cited by 1,444
Cited by
Xolography for linear volumetric 3D printing
Regehly, M., Garmshausen, Y., Reuter, M., König, N. F., Israel, E., Kelly, D. P., Chou, C.-Y., Koch, K., Asfari, B., & Hecht, S. (2020) · Nature · doi:10.1038/s41586-020-3029-7 · Cited by 527
Porous ceramics: Light in weight but heavy in energy and environment technologies
Chen, Y., Wang, N., Ola, O., Xia, Y., & Zhu, Y. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100589 · Cited by 441
Digital dentistry: The new state of the art — Is it disruptive or destructive?
Rekow, E. D. (2020) · Dental Materials · doi:10.1016/j.dental.2019.08.103 · Cited by 284
On the environmental impacts of 3D printing technology
Khosravani, M. R., & Reinicke, T. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100689 · Cited by 284
Zhou, S., Liu, G., Wang, C., Zhang, Y., Yan, C., & Shi, Y. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.112632 · Cited by 150
Metadata
- Authors
- Galante, R., Figueiredo-Pina, C. G., & Serro, A. P.
- Venue
- Dental Materials
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 35
- Issue
- 6
- Pages
- 825-846
- ISSN
- 0109-5641 (ISSN-L)
- OpenAlex
- W2934039943
- Cited by
- 441
- References
- 64
- FWCI
- 22.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Additive manufacturing of ceramics for dental applications: A review. https://app.cochat.ai/papers/10.1016/j.dental.2019.02.026
- The paper
- Galante, R., Figueiredo-Pina, C. G., & Serro, A. P. (2019). Additive manufacturing of ceramics for dental applications: A review. Dental Materials. https://doi.org/10.1016/j.dental.2019.02.026
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
