The DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.
Additive manufacturing of ceramics for dental applications: A review
Abstract
OBJECTIVE The main goal of this review is to provide a detailed and comprehensive description of the published work from the past decade regarding AM of ceramic materials with possible applications in dentistry. The main printable materials and most common technologies are also addressed, underlining their advantages and main drawbacks. METHODS Online databases (Web of knowledge, Science Direct, PubMed) were consulted on this topic. Published work from 2008 to 2018 was collected, analyzed and the relevant papers were selected for inclusion on this review. RESULTS Ceramic materials are broadly used in dentistry to restore/replace damaged or missing teeth, due to their biocompatibility, chemical stability and mechanical and aesthetic properties. However, there are several unmet challenges regarding their processing and performance. Due to their brittleness nature, a very tight control of the manufacturing process is needed to obtain dental pieces with adequate mechanical properties. Additive manufacturing (AM) is an emerging technology that constitutes an interesting and viable manufacturing alternative to the conventional subtractive methods. AM enables the production of customized complex 3D parts in a more sustainable and less expensive way. AM of ceramics can be achieved with an extensive variety of methods. SIGNIFICANCE There is no perfect technology for all materials/applications, capable alone of fulfilling all the specificities and necessities of every patient. Although very promising, AM of ceramic dental materials remains understudied and further work is required to make it a widespread technology in dentistry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
State of the art of zirconia for dental applications
Denry, I., & Kelly, J. R. (2008) · Dental Materials · doi:10.1016/j.dental.2007.05.007 · Cited by 2,133
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
Phase Analysis in Zirconia Systems
Garvie, R. C., & Nicholson, P. S. (1972) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1972.tb11290.x · Cited by 1,444
The future of dental devices is digital
van Noort, R. (2012) · Dental Materials · doi:10.1016/j.dental.2011.10.014 · Cited by 1,408
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Dawood, A., Marti, B. M., Sauret-Jackson, V., & Darwood, A. (2015) · British Dental Journal · doi:10.1038/sj.bdj.2015.914 · Cited by 1,133
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
Zocca, A., Colombo, P., Gomes, C. M., & Günster, J. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13700 · Cited by 1,115
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
Digital dentistry: an overview of recent developments for CAD/CAM generated restorations
Beuer, F., Schweiger, J., & Edelhoff, D. (2008) · British Dental Journal · doi:10.1038/sj.bdj.2008.350 · Cited by 943
Shirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Adib Kadri, N., & Osman, N. A. A. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/3/033502 · Cited by 755
Additive manufacturing of biomaterials
Bose, S., Ke, D., Sahasrabudhe, H., & Bandyopadhyay, A. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.08.003 · Cited by 738
Gonzalez-Gutierrez, J., Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J., & Holzer, C. (2018) · Materials · doi:10.3390/ma11050840 · Cited by 713
Craig's Restorative Dental Materials
(2012) · Elsevier eBooks · doi:10.1016/c2010-0-65754-3 · Cited by 646
Current and emerging applications of 3D printing in medicine
Liaw, C.-Y., & Guvendiren, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7279 · Cited by 604
Uriondo, A., Esperon-Miguez, M., & Perinpanayagam, S. (2015) · Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering · doi:10.1177/0954410014568797 · Cited by 489
Emerging Ceramic-based Materials for Dentistry
Denry, I., & Kelly, J. R. (2014) · Journal of Dental Research · doi:10.1177/0022034514553627 · Cited by 464
Additive manufacturing of ceramics: A review
Deckers, J. P., Vleugels, J., & Kruth, J. (2014) · Lirias (KU Leuven) · doi:10.4416/jcst2014-00032 · Cited by 429
Trends in Computer-Aided Manufacturing in Prosthodontics: A Review of the Available Streams
Abduo, J., Lyons, K., & Bennamoun, M. (2014) · International Journal of Dentistry · doi:10.1155/2014/783948 · Cited by 424
Calcium Phosphate Cement: Review of Mechanical and Biological Properties
Ambard, A. J., & Mueninghoff, L. (2006) · Journal of Prosthodontics · doi:10.1111/j.1532-849x.2006.00129.x · Cited by 407
Fielding, G. A., Bandyopadhyay, A., & Bose, S. (2012) · Dental Materials · doi:10.1016/j.dental.2011.09.010 · Cited by 401
Additive manufacturing of ZrO2‐Al2O3 ceramic components by selective laser melting
Wilkes, J., Hagedorn, Y., Meiners, W., & Wissenbach, K. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311292736 · Cited by 398
Zirconia based dental ceramics: structure, mechanical properties, biocompatibility and applications
Gautam, C., Joyner, J., Gautam, A., Rao, J., & Vajtai, R. (2016) · Dalton Transactions · doi:10.1039/c6dt03484e · Cited by 395
Additive manufacturing tooling for the automotive industry
Leal, R., Barreiros, F. M., Alves, L., Romeiro, F., Vasco, J. C., Santos, M., & Marto, C. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0239-8 · Cited by 388
Zirconia: Established facts and perspectives for a biomaterial in dental implantology
Hisbergues, M., Vendeville, S., & Vendeville, P. (2009) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31147 · Cited by 361
Van Assche, N., Van Steenberghe, D., Guerrero, M. E., Hirsch, E., Schutyser, F., Quirynen, M., & Jacobs, R. (2007) · Journal of Clinical Periodontology · doi:10.1111/j.1600-051x.2007.01110.x · Cited by 318
CAD/CAM systems available for the fabrication of crown and bridge restorations
Miyazaki, T., & Hotta, Y. (2011) · Australian Dental Journal · doi:10.1111/j.1834-7819.2010.01300.x · Cited by 310
Pepla, E. (2014) · Annali di Stomatologia · doi:10.11138/ads/2014.5.3.108 · Cited by 307
Direct Inkjet Printing of Dental Prostheses Made of Zirconia
Ebert, J., Özkol, E., Zeichner, A., Uibel, K., Weiss, Ö., Koops, U., Telle, R., & Fischer, H. (2009) · Journal of Dental Research · doi:10.1177/0022034509339988 · Cited by 281
Shenoy, A., & Shenoy, N. (2010) · Journal of Conservative Dentistry · doi:10.4103/0972-0707.73379 · Cited by 263
Wu, H., Cheng, Y., Liu, W., He, R., Zhou, M., Wu, S., Song, X., & Chen, Y. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.08.024 · Cited by 248
Akagawa, Y., Ichikawa, Y., Nikai, H., & Tsuru, H. (1993) · Journal of Prosthetic Dentistry · doi:10.1016/0022-3913(93)90289-z · Cited by 246
Three-Dimensional Printing: Basic Principles and Applications in Medicine and Radiology
Kim, G. B., Lee, S., Kim, H., Yang, D. H., Kim, Y.-H., Kyung, Y. S., Kim, C.-S., Choi, S. H., Kim, B. J., Ha, H., et al. (2016) · Korean Journal of Radiology · doi:10.3348/kjr.2016.17.2.182 · Cited by 243
Dehurtevent, M., Robberecht, L., Hornez, J.-C., Thuault, A., Deveaux, E., & Béhin, P. (2017) · Dental Materials · doi:10.1016/j.dental.2017.01.018 · Cited by 228
3D powder printed calcium phosphate implants for reconstruction of cranial and maxillofacial defects
Klammert, U., Gbureck, U., Vorndran, E., Rödiger, J., Meyer-Marcotty, P., & Kübler, A. C. (2010) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2010.01.009 · Cited by 213
Xing, H., Zou, B., Li, S., & Fu, X. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.09.007 · Cited by 198
Influence of Resin Composition on the Defect Formation in Alumina Manufactured by Stereolithography
Johansson, E., Lidström, O., Johansson, J., Lyckfeldt, O., & Adolfsson, E. (2017) · Materials · doi:10.3390/ma10020138 · Cited by 197
Additive manufacturing for aerospace flight applications
Shapiro, A. A., Borgonia, J. P., Chen, Q. N., Dillon, R. P., McEnerney, B., Polit-Casillas, R., & Soloway, L. (2016) · Journal of Spacecraft and Rockets · doi:10.2514/1.a33544 · Cited by 178
Thermoplastic 3D Printing—An Additive Manufacturing Method for Producing Dense Ceramics
Scheithauer, U., Schwarzer, E., Richter, H., & Moritz, T. (2014) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12306 · Cited by 177
Chen, J., Zhang, Z., Chen, X., Zhang, C., Zhang, G., & Xu, Z. (2014) · The Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2014.04.026 · Cited by 175
Property enhancement of 3D-printed alumina ceramics using vacuum infiltration
Maleksaeedi, S., Eng, H., Wiria, F. E., Ha, T. M. H., & He, Z. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.01.019 · Cited by 161
3D gel-printing of zirconia ceramic parts
Shao, H., Zhao, D., Lin, T., He, J., & Wu, J. W. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.07.124 · Cited by 128
Biomechanics and Biomaterials in Orthopedics
(2004) · Springer eBooks · doi:10.1007/978-1-4471-3774-0 · Cited by 124
Fahimipour, F., Rasoulianboroujeni, M., Dashtimoghadam, E., Khoshroo, K., Tahriri, M., Bastami, F., Lobner, D., & Tayebi, L. (2017) · Dental Materials · doi:10.1016/j.dental.2017.06.016 · Cited by 124
Improving the properties of ceramic foams by a vacuum infiltration process
Vogt, U. F., Gorbar, M., Dimopoulos-Eggenschwiler, P., Broenstrup, A., Wagner, G., & Colombo, P. (2010) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2010.06.003 · Cited by 120
Guo, N., & Leu, M. C. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.11.058 · Cited by 117
Tamimi, F., Torres, J., Al‐Abedalla, K., López‐Cabarcos, E., Alkhraisat, M. H., Bassett, D. C., Gbureck, U., & Barralet, J. E. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.03.050 · Cited by 113
Rahim, T. N. A. T., Abdullah, A. M., Akil, H. M., Mohamad, D., & Rajion, Z. A. (2017) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2017.92 · Cited by 101
Scheithauer, U., Weingarten, S., Johne, R., Schwarzer, E., Abel, J., Richter, H., Moritz, T., & Michaelis, A. (2017) · Materials · doi:10.3390/ma10121368 · Cited by 101
Asadi‐Eydivand, M., Solati‐Hashjin, M., Shafiei, S. S., Mohammadi, S., Hafezi, M., & Osman, N. A. A. (2016) · PLoS ONE · doi:10.1371/journal.pone.0151216 · Cited by 74
Monmaturapoj, N., Lawita, P., & Thepsuwan, W. (2013) · Advances in Materials Science and Engineering · doi:10.1155/2013/763838 · Cited by 71
Additive Manufacturing to Produce Complex 3D Ceramic Parts
Chartier, T., Dupas, C., Lasgorceix, M., Brie, J., Delhote, N., & Chaput, C. (2014) · HAL · doi:10.4416/jcst2014-00040 · Cited by 63
Review: Dimensional Accuracy in Additive Manufacturing Processes
Lee, P.-H., Chung, H., Lee, S. W., Yoo, J., & Ko, J. (2014) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec2014-4037 · Cited by 61
An, D., Li, H., Xie, Z., Zhu, T., Luo, X., Shen, Z. J., & Ma, J. (2017) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12721 · Cited by 60
Mechanical and biological evaluation of 3D printed 10CeTZP-Al 2 O 3 structures
Goyos, L., García‐Tuñón, E., Fernández-García, E., Díaz, R., Fernández, A., Prado, C., Saiz, E., & Torrecillas, R. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.03.012 · Cited by 50
Cytotoxicity and biocompatibility of Zirconia (Y-TZP) posts with various dental cements
Shin, H.-S., Ko, H., & Kim, M. (2016) · Restorative Dentistry & Endodontics · doi:10.5395/rde.2016.41.3.167 · Cited by 39
Alayavalli, K., & Bourell, D. L. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011049289 · Cited by 34
Polymer-Ceramic Bionanocomposites for Dental Application
Lee, J., Kim, H., & Seo, S.-J. (2016) · Journal of Nanomaterials · doi:10.1155/2016/3795976 · Cited by 23
Cited by
Vafadar, A., Guzzomi, F., Rassau, A., & Hayward, K. (2021) · Applied Sciences · doi:10.3390/app11031213 · Cited by 748
A Review of 3D Printing in Dentistry: Technologies, Affecting Factors, and Applications
Tian, Y., Chen, C., Xu, X., Wang, J., Hou, X., Li, K., Lu, X., Shi, H., Lee, E.-S., & Jiang, H. B. (2021) · Scanning · doi:10.1155/2021/9950131 · Cited by 569
Xolography for linear volumetric 3D printing
Regehly, M., Garmshausen, Y., Reuter, M., König, N. F., Israel, E., Kelly, D. P., Chou, C.-Y., Koch, K., Asfari, B., & Hecht, S. (2020) · Nature · doi:10.1038/s41586-020-3029-7 · Cited by 527
Additive Manufacturing Processes in Medical Applications
Salmi, M. (2021) · Materials · doi:10.3390/ma14010191 · Cited by 500
Porous ceramics: Light in weight but heavy in energy and environment technologies
Chen, Y., Wang, N., Ola, O., Xia, Y., & Zhu, Y. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100589 · Cited by 441
Metadata
- Authors
- Galante, R., Figueiredo-Pina, C. G., & Serro, A. P.
- Venue
- Dental Materials
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 35
- Issue
- 6
- Pages
- 825-846
- ISSN
- 0109-5641 (ISSN-L)
- OpenAlex
- W2934039943
- Cited by
- 441
- References
- 65
- FWCI
- 22.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.