Tannic acid assisted interfacial polymerization based loose thin-film composite NF membrane for dye/salt separation
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
In this work, a novel tannic acid assisted interfacial polymerization (TAIP) method was developed for preparing loose nanofiltration membranes (LNMs). Piperazine (PIP) and tannic acid (TA), two kinds of common monomer for interfacial polymerization (IP), were employed to deposit on substrate for the TAIP process. The TAIP process resulted in enlarged pores in the skin layer due to the longer monomers, thus achieved considerable permselectivity in separating salts from dye/salt mixture solution. The optimal TAIP membrane (M4) exhibited high permeability (32.57 LMH·bar−1 to Congo Red solution), reasonable rejection to dyes (99.40% and 99.19% for Congo Red and Rose Bengal, respectively) and satisfactory transport to salts (90.59% to Na2SO4 and 97.75% to NaCl). Meanwhile, this membrane retained high performance in dye/salt separation (7.16 LMH·bar−1 of permeability, 97.47% of CR rejection and 2.55% of NaCl retention) under even as high as 6 wt% of salt concentration. Moreover, TAIP LNM showed high stability throughout a 30-hour-long running test to separate salts from dye/salt mixture solution. We anticipated the TAIP methodology, together with the consequential LNM, to provide a potential candidate for dye/salt separation application.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Facile Conjugation of Biomolecules onto Surfaces via Mussel Adhesive Protein Inspired Coatings
Lee, H., Rho, J., & Messersmith, P. B. (2009) · Advanced Materials · doi:10.1002/adma.200801222 · Cited by 1,495
Yang, Z., Zhou, Z.-W., Guo, H., Yao, Z., Ma, X.-H., Song, X., Feng, S.-P., & Tang, C. Y. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b02425 · Cited by 437
Cited by
Applications of tannic acid in membrane technologies: A review
Yan, W., Shi, M., Dong, C., Liu, L., & Gao, C. (2020) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2020.102267 · Cited by 473
Recent advances of loose nanofiltration membranes for dye/salt separation
Feng, X., Peng, D., Zhu, J., Wang, Y., & Zhang, Y. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.120228 · Cited by 410
Loose nanofiltration membrane custom-tailored for resource recovery
Guo, S., Wan, Y., Chen, X., & Luo, J. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127376 · Cited by 307
Manipulating interfacial polymerization for polymeric nanofilms of composite separation membranes
Wang, Z., Liang, S., Kang, Y., Zhao, W., Xia, Y., Yang, J., Wang, H., & Zhang, X. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101450 · Cited by 218
Metadata
- Authors
- Li, Q., Liao, Z., Fang, X., Xie, J., Ni, L., Wang, D., Qi, J., Sun, X., Wang, L., & Li, J.
- Venue
- Desalination
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 479
- Pages
- 114343
- ISSN
- 0011-9164 (ISSN-L)
- OpenAlex
- W3004177125
- Cited by
- 236
- References
- 2
- FWCI
- 9.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.