Corrosion in MEA units for CO2 capture: Pilot plant studies
Open accessThe DOI matches its Crossref record.
Abstract
Among the technologies that are under study for CO2 capture from flue gas, the separation process using monoethanolamine (MEA) could be the first to be available for immediate industrial applications in the next few years. The principles of CO2 separation using alkanolamines were discovered nearly a century ago. The process has been applied successfully for several decades in areas such as natural gas processing or coal gasification. The application to flue gas treatment was introduced in the early 1980s, but was not widespread. In such industrial processes, corrosion represents one of the major operational problems. For the capture of CO2 from flue gas using MEA, the problem is even more critical since (i) MEA is one of the most corrosive amine when compared to secondary or tertiary amines that are also used for gas sweetening, and (ii) flue gas contains a certain amount of oxygen, which can react with the amine to form corrosive degradation products. In the framework of the CAPRICE project, which is an International cooperation and exchange project supported by the EU, The International Test centre for CO2 Capture from the University of Regina (CA) and IFP (F) have shared their experience on corrosion monitoring from CO2 capture pilot plants. The first pilot plant facility is owned by ITC. It has a capacity to capture 1 ton CO2/day from a natural gas burner. It is equipped with corrosion control instruments and other monitoring systems. The second pilot plant is located in a coal fired power station in Esbjerg (DK). It was built with the financial support of the UE through the CASTOR project under the lead of IFP. It has been in operation since early 2006, and has a capacity of 1.0 ton CO2/hour. It is equipped with weight loss coupons for corrosion evaluation at different locations in the process. This paper presents the major results of corrosion testing from both pilot plants under MEA operation. It appeared from both pilot plants that the areas most susceptible to corrosion were the stripper inlet and outlet, with corrosion rates around 1 mm.year−1 for carbon steel.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Post-combustion CO2 capture with chemical absorption: A state-of-the-art review
Wang, M., Lawal, A., Stephenson, P., Sidders, J., & Ramshaw, C. (2011) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2010.11.005 · Cited by 1,458
Deep Eutectic Solvents: Physicochemical Properties and Gas Separation Applications
García, G., Aparicio, S., Ullah, R., & Atilhan, M. (2015) · Energy & Fuels · doi:10.1021/ef5028873 · Cited by 1,112
Recent developments on carbon capture and storage: An overview
Pires, J. C. M., Martins, F. G., Alvim-Ferraz, M. C. M., & Simões, M. (2011) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2011.01.028 · Cited by 811
Post-combustion carbon capture
Chao, C., Deng, Y., Dewil, R., Baeyens, J., & Fan, X. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110490 · Cited by 652
Research progress of aqueous amine solution for CO2 capture: A review
Meng, F., Meng, Y., Ju, T., Han, S., Lin, L., & Jiang, J. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112902 · Cited by 536
Current status and challenges on microalgae-based carbon capture
Lam, M. K., Lee, K. T., & Mohamed, A. R. (2012) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2012.07.010 · Cited by 393
Experience with CO2 capture from coal flue gas in pilot-scale: Testing of different amine solvents
Knudsen, J. N., Jensen, J. N., Vilhelmsen, P.-J., & Biede, O. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.104 · Cited by 335
Carbon dioxide capture capacity of sodium hydroxide aqueous solution
Yoo, M., Han, S.-J., & Wee, J.-H. (2013) · Journal of Environmental Management · doi:10.1016/j.jenvman.2012.10.061 · Cited by 300
Overview of Carbon Capture Technology: Microalgal Biorefinery Concept and State-of-the-Art
Singh, J., & Dhar, D. W. (2019) · Frontiers in Marine Science · doi:10.3389/fmars.2019.00029 · Cited by 264
Reynolds, A. J., Verheyen, T. V., Adeloju, S. B., Meuleman, E., & Feron, P. (2012) · Environmental Science & Technology · doi:10.1021/es204051s · Cited by 254
Altamash, T., Nasser, M. S., Elhamarnah, Y., Magzoub, M., Ullah, R., Qiblawey, H., Aparicio, S., & Atilhan, M. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.02.049 · Cited by 103
Multiphase carbon mineralization for the reactive separation of CO2 and directed synthesis of H2
Gadikota, G. (2020) · Nature Reviews Chemistry · doi:10.1038/s41570-019-0158-3 · Cited by 95
Metadata
- Authors
- Kittel, J., Idem, R., Gelowitz, D., Tontiwachwuthikul, P., Parrain, G., & Bonneau, A.
- Venue
- Energy Procedia
- Publisher
- Elsevier BV
- Published
- 2009-02
- Volume
- 1
- Issue
- 1
- Pages
- 791-797
- ISSN
- 1876-6102 (ISSN-L)
- OpenAlex
- W1984339768
- Cited by
- 228
- References
- 0
- FWCI
- 30.70
- Type
- conference paper
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.