Pilot test results of post-combustion CO2 capture using solid sorbents
Open accessThe DOI matches its Crossref record.
Abstract
ADA Environmental Solutions (ADA) is examining available sorbents as well as process equipment options to assess the viability and accelerate development of solid sorbents for post-combustion CO2 capture. This work is being completed through a US Department of Energy (DOE) Cooperative Agreement with supplemental funding from ADA, EPRI, and several power industry partners. During the project, sorbents were acquired from 22 developers and screened at the laboratory-scale to select materials for testing in a 1 kW slipstream pilot. Based on the lab scale results, pilot-scale batches of two sorbents were produced and one was tested in the 1 kW pilot. In a parallel effort, commercially available processes and equipment were evaluated to identify those that have promise for commercial-scale CO2 capture. ADA has screened over 100 materials using a fixed bed system both in the laboratory with simulated flue gas and in the field with a slipstream of actual flue gas. The materials were tested over multiple adsorption/regeneration cycles. The purpose of this ongoing screening is to identify materials that exhibit properties that are promising enough to be produced and evaluated at larger scales. Results from different materials are highly varied, but general conclusions can be drawn regarding different sorbent types. For example, sorbents that include amine functionalization generally have a high CO2 capacity (i.e. 5% to 14% by weight), whereas carbon-based materials have been observed to have lower CO2 capacities, but superior cyclic stability. Several hundred pounds of two promising sorbents were produced and evaluated using a contactor installed on a 1 kW equivalent slipstream of flue gas at an operating coal-fired power plant. The system utilizes a circulating fluidized bed with the following key components: adsorption using entrained flow, regeneration via a temperature swing with an option for a sweep gas, gas/solids separation, and cooling. One supported amine sorbent was evaluated in both continuous and batch mode and achieved 90 CO2 removal repeatedly. Many different commercial industries use large-scale equipment for gas/solids contacting, conveying, and heat transfer. In the parallel effort to evaluate commercial-scale equipment options, ADA is working with Stantec, a leading engineering design firm, to identify existing commercial equipment and processes that could be useful for CO2 capture with solids. Each process and/or equipment component has been categorized as being useful for either adsorption, regeneration, materials conveying, and/or heat transfer. A survey has been completed for each potential technology. After examining all of the commercially available technologies, those that are optimal for the application of CO2 capture were selected and used as the basis for a 500 MW conceptual design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
Carbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
Activated carbons from biomass-based sources for CO2 capture applications
Abuelnoor, N., AlHajaj, A., Khaleel, M., Vega, L. F., & Abu-Zahra, M. R. M. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.131111 · Cited by 310
Review on Reactor Configurations for Adsorption-Based CO 2 Capture
Dhoke, C., Zaabout, A., Cloete, S., & Amini, S. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c04547 · Cited by 240
Development of adsorbents for CO2 capture from waste materials: a review
Olivares‐Marín, M., & Maroto‐Valer, M. M. (2012) · Greenhouse Gases: Science and Technology · doi:10.1002/ghg.45 · Cited by 142
Metadata
- Authors
- Sjostrom, S., Krutka, H., Starns, T., & Campbell, T.
- Venue
- Energy Procedia
- Publisher
- Elsevier BV
- Published
- 2011
- Volume
- 4
- Pages
- 1584-1592
- ISSN
- 1876-6102 (ISSN-L)
- OpenAlex
- W1990635027
- Cited by
- 68
- References
- 0
- FWCI
- 17.64
- Type
- conference paper
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Pilot test results of post-combustion CO2 capture using solid sorbents. https://app.cochat.ai/papers/10.1016/j.egypro.2011.02.028
- The paper
- Sjostrom, S., Krutka, H., Starns, T., & Campbell, T. (2011). Pilot test results of post-combustion CO2 capture using solid sorbents. Energy Procedia. https://doi.org/10.1016/j.egypro.2011.02.028
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.