The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Open accessAbstract
The aim of this study was to explore the potential of fused-deposition 3-dimensional printing (FDM 3DP) to produce modified-release drug loaded tablets. Two aminosalicylate isomers used in the treatment of inflammatory bowel disease (IBD), 5-aminosalicylic acid (5-ASA, mesalazine) and 4-aminosalicylic acid (4-ASA), were selected as model drugs. Commercially produced polyvinyl alcohol (PVA) filaments were loaded with the drugs in an ethanolic drug solution. A final drug-loading of 0.06% w/w and 0.25% w/w was achieved for the 5-ASA and 4-ASA strands, respectively. 10.5mm diameter tablets of both PVA/4-ASA and PVA/5-ASA were subsequently printed using an FDM 3D printer, and varying the weight and densities of the printed tablets was achieved by selecting the infill percentage in the printer software. The tablets were mechanically strong, and the FDM 3D printing was shown to be an effective process for the manufacture of the drug, 5-ASA. Significant thermal degradation of the active 4-ASA (50%) occurred during printing, however, indicating that the method may not be appropriate for drugs when printing at high temperatures exceeding those of the degradation point. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) of the formulated blends confirmed these findings while highlighting the potential of thermal analytical techniques to anticipate drug degradation issues in the 3D printing process. The results of the dissolution tests conducted in modified Hank's bicarbonate buffer showed that release profiles for both drugs were dependent on both the drug itself and on the infill percentage of the tablet. Our work here demonstrates the potential role of FDM 3DP as an efficient and low-cost alternative method of manufacturing individually tailored oral drug dosage, and also for production of modified-release formulations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fused-filament 3D printing (3DP) for fabrication of tablets
Goyanes, A., Buanz, A. B. M., Basit, A. W., & Gaisford, S. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.09.044 · Cited by 587
Self-citationHandbook of Aqueous Solubility Data
Yalkowsky, S. H. (2003) · CRC Press eBooks · doi:10.1201/9780203490396 · Cited by 585
Desktop 3D printing of controlled release pharmaceutical bilayer tablets
Khaled, S. A., Burley, J. C., Alexander, M. R., & Roberts, C. J. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.11.021 · Cited by 511
Oral dosage forms fabricated by Three Dimensional Printing™
Katstra, W. E., Palazzolo, R. D., Rowe, C. W., Giritlioglu, B., Teung, P., & Cima, M. J. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00225-4 · Cited by 334
Personalised dosing: Printing a dose of one’s own medicine
Alomari, M., Mohamed, F. H., Basit, A. W., & Gaisford, S. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.12.006 · Cited by 257
Self-citationMultimechanism oral dosage forms fabricated by three dimensional printing™
Rowe, C. W., Katstra, W. E., Palazzolo, R. D., Giritlioglu, B., Teung, P., & Cima, M. J. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00224-2 · Cited by 255
Low temperature direct 3D printed bioceramics and biocomposites as drug release matrices
Gbureck, U., Vorndran, E., Müller, F. A., & Barralet, J. E. (2007) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.06.022 · Cited by 213
Preparation of Personalized-dose Salbutamol Sulphate Oral Films with Thermal Ink-Jet Printing
Buanz, A. B. M., Saunders, M. H., Basit, A. W., & Gaisford, S. (2011) · Pharmaceutical Research · doi:10.1007/s11095-011-0450-5 · Cited by 202
Self-citationThree-Dimensional Printing in Pharmaceutics: Promises and Problems
Yu, D. G., Zhu, L.-M., Branford-White, C. J., & Yang, X. L. (2008) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21284 · Cited by 187
Evolution of PVA gels prepared without crosslinking agents as a cell adhesive surface
Gupta, S., Webster, T. J., & Sinha, A. (2011) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-011-4343-2 · Cited by 163
Huang, W., Zheng, Q., Sun, W., Xu, H., & Yang, X. (2007) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2007.02.021 · Cited by 159
Tablets With Material Gradients Fabricated by Three-Dimensional Printing
Yu, D. G., Yang, X. L., Huang, W. D., Liu, J., Wang, Y. G., & Xu, H. (2007) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.20864 · Cited by 159
3-dimensional (3D) fabricated polymer based drug delivery systems
Moulton, S. E., & Wallace, G. G. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.07.005 · Cited by 156
Handbook of aqueous solubility data
(2004) · Choice Reviews Online · doi:10.5860/choice.41-2827 · Cited by 138
Yu, D., Shen, X., Branford-White, C. J., Zhu, L., White, K., & Xiang, Y. (2009) · Journal of Pharmacy and Pharmacology · doi:10.1211/jpp.61.03.0006 · Cited by 128
Liu, F., Merchant, H. A., Kulkarni, R. P., Alkademi, M., & Basit, A. W. (2011) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2011.01.001 · Cited by 124
Self-citationFadda, H. M., Merchant, H. A., Arafat, B. T., & Basit, A. W. (2009) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2009.08.003 · Cited by 123
Self-citationWang, C.-C., Tejwani, M. R., Roach, W. J., Kay, J. L., Yoo, J., Surprenant, H. L., Monkhouse, D. C., & Pryor, T. J. (2006) · Drug Development and Industrial Pharmacy · doi:10.1080/03639040500519300 · Cited by 118
A novel fast disintegrating tablet fabricated by three-dimensional printing
Yu, D., Branford-White, C. J., Yang, Y., et al. (2009) · Drug Development and Industrial Pharmacy · doi:10.3109/03639040903059359 · Cited by 108
Colonic treatments and targets: issues and opportunities
McConnell, E. L., Liu, F., & Basit, A. W. (2009) · Journal of drug targeting · doi:10.1080/10611860902839502 · Cited by 93
Self-citationMueannoom, W., Srisongphan, A., Taylor, K. M. G., Hauschild, S., & Gaisford, S. (2011) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2011.09.016 · Cited by 65
Self-citationToF-SIMS analysis of chemical heterogenities in inkjet micro-array printed drug/polymer formulations
Scoutaris, N., Hook, A. L., Gellert, P. R., Roberts, C. J., Alexander, M. R., & Scurr, D. J. (2011) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-011-4474-5 · Cited by 60
Tuleu, C., Basit, A. W., Waddington, W. A., Ell, P. J., & Newton, J. (2002) · Alimentary Pharmacology & Therapeutics · doi:10.1046/j.1365-2036.2002.01327.x · Cited by 56
Self-citationSharma, G., Mueannoom, W., Buanz, A. B. M., Taylor, K. M. G., & Gaisford, S. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.02.045 · Cited by 55
Self-citationMerchant, H. A., Goyanes, Á., Parashar, N., & Basit, A. W. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.09.003 · Cited by 51
Self-citation
Cited by
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Binder jetting: A review of process, materials, and methods
Ziaee, M., & Crane, N. B. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.031 · Cited by 819
A new chapter in pharmaceutical manufacturing: 3D-printed drug products
Norman, J., Madurawe, R. D., Moore, C. M. V., Khan, M. A., & Khairuzzaman, A. (2017) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.001 · Cited by 810
Effect of geometry on drug release from 3D printed tablets
Goyanes, A., Robles Martinez, P., Buanz, A., Basit, A. W., & Gaisford, S. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.04.069 · Cited by 667
Self-citation3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
Goole, J., & Amighi, K. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.12.071 · Cited by 660
Metadata
- Authors
- Goyanes, A., Buanz, A. B. M., Hatton, G. B., Gaisford, S., & Basit, A. W.
- Venue
- European Journal of Pharmaceutics and Biopharmaceutics
- Publisher
- Elsevier BV
- Published
- 2015-01
- Volume
- 89
- Pages
- 157-162
- ISSN
- 0939-6411 (ISSN-L)
- OpenAlex
- W1999841934
- Cited by
- 570
- References
- 25
- FWCI
- 26.14
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.