Investigations of lithium–sulfur batteries using electrochemical impedance spectroscopy

Polysulfide Shuttle Study in the Li/S Battery System

Mikhaylik, Y., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,112

Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer

Su, Y., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,467

On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries

Aurbach, D., Gamolsky, K., Markovsky, B., Gofer, Y., Schmidt, M., & Heider, U. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(01)00858-1 · Cited by 996

Lithium/Sulfur Cell Discharge Mechanism: An Original Approach for Intermediate Species Identification

Barchasz, C., Molton, F., Duboc, C., Leprêtre, J., Patoux, S., & Alloin, F. (2012) · Analytical Chemistry · doi:10.1021/ac2032244 · Cited by 958

A Polyaniline‐Coated Sulfur/Carbon Composite with an Enhanced High‐Rate Capability as a Cathode Material for Lithium/Sulfur Batteries

Li, G. C., Li, G., Ye, S. H., & Gao, X. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200017 · Cited by 526

Improved cycling performances of lithium sulfur batteries with LiNO3-modified electrolyte

Liang, X. M., Wen, Z., Liu, Y., Wu, M., Jin, J. H., Zhang, H., & Wu, X. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.027 · Cited by 506

Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries

Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200696 · Cited by 457

New insights into the limiting parameters of the Li/S rechargeable cell

Barchasz, C., Leprêtre, J., Alloin, F., & Patoux, S. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.07.021 · Cited by 398

New insight into the discharge process of sulfur cathode by electrochemical impedance spectroscopy

Yuan, L., Qiu, X., Chen, L., et al. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.033 · Cited by 380

Properties of surface film on lithium anode with LiNO3 as lithium salt in electrolyte solution for lithium–sulfur batteries

Xiong, S., Xie, K., Diao, Y., & Hong, X. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.07.118 · Cited by 371

Analysis of 3.4 Ah lithium-sulfur pouch cells by electrochemical impedance spectroscopy

Capková, D., Knap, V., Fedorková, A. S., et al. (2022) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2022.05.026 · Cited by 61

Assessment on the Self-Discharge Behavior of Lithium–Sulfur Batteries with LiNO3-Possessing Electrolytes

Sun, M., Wang, X., Wang, J., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b11890 · Cited by 61

New Insight into the Confinement Effect of Microporous Carbon in Li/Se Battery Chemistry: A Cathode with Enhanced Conductivity

Wang, X., Tan, Y., Liu, Z., Fan, Y., Li, M., Younus, H. A., Duan, J., Deng, H., & Zhang, S. (2020) · Small · doi:10.1002/smll.202000266 · Cited by 61

Modeling of nano-structured cathodes for improved lithium-sulfur batteries

Danner, T., Zhu, G., Hofmann, A. F., et al. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.09.143 · Cited by 60

Shape-controlled synthesis of Ti4O7 nanostructures under solvothermal-assisted heat treatment and its application in lithium-sulfur batteries

Zhang, Y., Yao, S., Zhuang, R., et al. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.09.252 · Cited by 59

Let It Catch: A Short‐Branched Protein for Efficiently Capturing Polysulfides in Lithium–Sulfur Batteries

Chen, M., Li, C., Fu, X., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903642 · Cited by 59

Activated graphene with tailored pore structure parameters for long cycle-life lithium–sulfur batteries

Zheng, M., Zhang, S., Chen, S., et al. (2017) · Nano Research · doi:10.1007/s12274-017-1659-3 · Cited by 58

Physics-Informed Deep Learning for Lithium-Ion Battery Diagnostics Using Electrochemical Impedance Spectroscopy

Lin, Y., Ruan, S.-J., Chen, Y., & Li, Y. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113807 · Cited by 61

Impedance response of porous carbon cathodes in polysulfide redox system

Talian, S. D., Moškon, J., Dominko, R., et al. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.02.037 · Cited by 58

A Janus protein-based nanofabric for trapping polysulfides and stabilizing lithium metal in lithium–sulfur batteries

Chen, M., Chen, Z., Fu, X., et al. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta01989e · Cited by 57

Understanding the Electrolytes of Lithium−Sulfur Batteries

Angulakshmi, N., Dhanalakshmi, R., Sathya, S., et al. (2021) · Batteries & Supercaps · doi:10.1002/batt.202000273 · Cited by 57

Mg0.6Ni0.4O hollow nanofibers prepared by electrospinning as additive for improving electrochemical performance of lithium–sulfur batteries

Tang, H., Yao, S., Jing, M., et al. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.07.264 · Cited by 56

Potential of Printed Electrodes for Electrochemical Impedance Spectroscopy (EIS): Toward Membrane Fouling Detection

Goh, G. L., Tay, M. F., Lee, J. M., Ho, J. S., Sim, L. N., Yeong, W. Y., & Chong, T. H. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202100043 · Cited by 57

High-entropy nanoparticle constructed porous honeycomb as a 3D sulfur host for lithium polysulfide adsorption and catalytic conversion in Li–S batteries

Zhou, Z., Chen, Z., Lv, H., Zhao, Y., Wei, H., Huai, G., Xu, R., & Wang, Y. (2023) · Journal of Materials Chemistry A · doi:10.1039/d2ta08126a · Cited by 53

Three‐Electron Transfer‐Based High‐Capacity Organic Lithium‐Iodine (Chlorine) Batteries

Li, X., Wang, Y., Lu, J., et al. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202310168 · Cited by 54

Graphene derived carbon confined sulfur cathodes for lithium-sulfur batteries: Electrochemical impedance studies

Ganesan, A., Varzi, A., Passerini, S., & Shaijumon, M. M. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.08.030 · Cited by 54

Optimized synthesis of banana peel derived porous carbon and its application in lithium sulfur batteries

Xue, M., Lu, W., Chen, C., et al. (2018) · Materials Research Bulletin · doi:10.1016/j.materresbull.2018.12.035 · Cited by 54

Cobalt(II)‐Centered Fluorinated Phthalocyanine‐Sulfur SNAr Chemistry for Robust Lithium–Sulfur Batteries with Superior Conversion Kinetics

Kim, J., Shin, H., Yoo, D., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106679 · Cited by 54

Insights into Multiphase Reactions during Self-Discharge of Li-S Batteries

Wen, G., Rehman, S., Tranter, T. G., et al. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c00235 · Cited by 53

The Pitfalls and Opportunities of Impedance Spectroscopy of Lithium Sulfur Batteries

Drvarič-Talian, S., Moškon, J., Dominko, R., & Gaberšček, M. (2021) · Advanced Materials Interfaces · doi:10.1002/admi.202101116 · Cited by 47

Pyrrolic‐Type Nitrogen‐Doped Hierarchical Macro/Mesoporous Carbon as a Bifunctional Host for High‐Performance Thick Cathodes for Lithium‐Sulfur Batteries

Han, P., Chung, S., & Manthiram, A. (2019) · Small · doi:10.1002/smll.201900690 · Cited by 52

Stabilization of gamma sulfur at room temperature to enable the use of carbonate electrolyte in Li-S batteries

Pai, R., Singh, A., Tang, M. H.-M., et al. (2022) · Communications Chemistry · doi:10.1038/s42004-022-00626-2 · Cited by 52

Sisal-derived activated carbons for cost-effective lithium–sulfur batteries

Raja, M., Angulakshmi, N., & Stephan, A. M. (2016) · RSC Advances · doi:10.1039/c5ra25850b · Cited by 51

Quantitative Galvanostatic Intermittent Titration Technique for the Analysis of a Model System with Applications in Lithium−Sulfur Batteries

Dibden, J. W., Meddings, N., Owen, J. R., et al. (2017) · ChemElectroChem · doi:10.1002/celc.201701004 · Cited by 51

Advanced in situ/operando characterizations of lithium-sulfur batteries: A sine qua non

Santos, É. A., Amaral, M. M., Damasceno, B. S., da Silva, L. M., Zanin, H., Weker, J. N., & RODELLA, C. B. (2024) · Nano Energy · doi:10.1016/j.nanoen.2024.110098 · Cited by 51

Self-Discharge Behavior of Lithium-Sulfur Batteries at Different Electrolyte/Sulfur Ratios

Shen, C., Xie, J., Zhang, M., et al. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0461903jes · Cited by 51

Ultramicroporous carbon aerogels encapsulating sulfur as the cathode for lithium–sulfur batteries

Nojabaee, M., Sievert, B., Schwan, M., Schettler, J., Warth, F., Wagner, N., Milow, B., & Friedrich, K. A. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta11332h · Cited by 49

Impedance Characterization of the Transport Properties of Electrolytes Contained within Porous Electrodes and Separators Useful for Li-S Batteries

Raccichini, R., Furness, L., Dibden, J. W., Owen, J. R., & Garcı́a-Aráez, N. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0631811jes · Cited by 51

Repelling Polysulfide Ions by Boron Nitride Nanosheet Coated Separators in Lithium–Sulfur Batteries

Fan, Y., Liu, D., Rahman, M. M., et al. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b02205 · Cited by 50

Micro-Spherical Sulfur/Graphene Oxide Composite via Spray Drying for High Performance Lithium Sulfur Batteries

Tian, Y., Sun, Z., Zhang, Y., et al. (2018) · Nanomaterials · doi:10.3390/nano8010050 · Cited by 49

Theoretical and experimental analysis of precipitation and solubility effects in lithium-sulfur batteries

Andrei, P., Shen, C., & Zheng, J. P. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.07.045 · Cited by 49

Regulating Polysulfide Diffusion and Deposition via Rational Design of Core–Shell Active Materials in Li–S Batteries

Feng, L., Yu, P., Fu, X., et al. (2022) · ACS Nano · doi:10.1021/acsnano.2c00882 · Cited by 48

Multidimensional operando analysis of macroscopic structure evolution in lithium sulfur cells by X-ray radiography

Risse, S., Jafta, C. J., Yang, Y., et al. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp01020b · Cited by 48

Influence of Rotational Distortions on Li+- and Na+-Intercalation in Anti-NASICON Fe2(MoO4)3

Zhou, S., Barım, G., Morgan, B. J., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01806 · Cited by 48

In Situ Conversion of Metal–Organic Frameworks into VO2–V3S4 Heterocatalyst Embedded Layered Porous Carbon as an “All‐in‐One” Host for Lithium–Sulfur Batteries

Seo, S., Yu, S., Park, S., et al. (2020) · Small · doi:10.1002/smll.202004806 · Cited by 48

Flame-Retardant and Polysulfide-Suppressed Ether-Based Electrolytes for High-Temperature Li-S Batteries.

He, M., Li, X., Holmes, N., Li, R.-Y., Wang, J.-J., Yin, G., Zuo, P.-J., & Sun, X. (2021) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.1c09492 · Cited by 37

Self-supporting Ti 3 C 2 T x foam/S cathodes with high sulfur loading for high-energy-density lithium–sulfur batteries

Zhao, T., Zhai, P., Yang, Z., et al. (2018) · Nanoscale · doi:10.1039/c8nr08642g · Cited by 47

Dual-Functional Multichannel Carbon Framework Embedded with CoS2 Nanoparticles: Promoting the Phase Transformation for High-Loading Li–S Batteries

Pan, Y., Cheng, X., Gao, M., et al. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c07875 · Cited by 47

Electrospun-cellulose derived free-standing carbon nanofibers as lightweight, ultrathin, and stackable interlayers for lithium-sulfur batteries

Park, D., Park, S., & Kim, D. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126596 · Cited by 47

Molten Salts Approach of Metal-Organic Framework-Derived Nitrogen-Doped Porous Carbon as Sulfur Host for Lithium-Sulfur Batteries

Kim, D. K., Byun, J. S., Moon, S., et al. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.135945 · Cited by 46

Enhancing lithium-sulfur battery performance with biomass-derived graphene-like porous carbon and NiO nanoparticles composites

Sultanov, F. R., Zhumasheva, N., Dangaliyeva, A., et al. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233959 · Cited by 46

A lithium passivated MoO 3 nanobelt decorated polypropylene separator for fast-charging long-life Li–S batteries

Kaisar, N., Abbas, S. A., Ding, J., Chen, H., Pao, C., Boopathi, K. M., Mohapatra, A., Chen, Y., Wu, S. H., Fang, J., et al. (2019) · Nanoscale · doi:10.1039/c8nr08262f · Cited by 46

Hierarchical nMOF-867/MXene Nanocomposite for Chemical Adsorption of Polysulfides in Lithium–Sulfur Batteries

Wen, C., Guo, D., Zheng, X., et al. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c01481 · Cited by 46

Lithium–Sulfur Batteries with High Rate and Cycle Performance by using Multilayered Separators coated with Ketjen Black

Tang, H., Yao, S., Shen, X., et al. (2016) · Energy Technology · doi:10.1002/ente.201600411 · Cited by 45

Probing Impedance and Microstructure Evolution in Lithium–Sulfur Battery Electrodes

Chen, C., Mistry, A. N., & Mukherjee, P. P. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b07245 · Cited by 44

Protecting lithium anode with LiNO3/Al2O3/PVDF-coated separator for lithium-sulfur batteries

Guan, Y., Wang, A., Liu, S., Li, Q., Wang, W., & Huang, Y. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.06.235 · Cited by 44

High-yield and in situ fabrication of high-content nitrogen-doped graphene nanoribbons@Co/CoOOH as an integrated sulfur host towards Li–S batteries

Tan, K., Liu, Y., Tan, Z., Zhang, J., Hou, L., & Yuan, C. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta13414j · Cited by 44

Binder-free, freestanding cathodes fabricated with an ultra-rapid diffusion of sulfur into carbon nanofiber mat for lithium sulfur batteries

Dillard, C., Chung, S., Singh, A., et al. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2018.06.004 · Cited by 43

Electrochemical processes in all-solid-state Li-S batteries studied by electrochemical impedance spectroscopy

Fan, B., Guan, Z., Wang, H., et al. (2021) · Solid State Ionics · doi:10.1016/j.ssi.2021.115680 · Cited by 43

Coating of sulfur particles with manganese oxide nanowires as a cathode material in lithium–sulfur batteries

Lee, J., Hwang, T., Lee, Y., Lee, J. K., & Choi, W. (2015) · Materials Letters · doi:10.1016/j.matlet.2015.06.003 · Cited by 44

Investigation of the temperature and DOD effect on the performance-degradation behavior of lithium–sulfur pouch cells during calendar aging

Capková, D., Knap, V., Fedorková, A. S., & Stroe, D. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.120543 · Cited by 42

Electrochemical impedance spectroscopy and battery systems: past work, current research, and future opportunities

Bakenhaster, S. T., & Dewald, H. D. (2025) · Journal of Applied Electrochemistry · doi:10.1007/s10800-025-02273-6 · Cited by 43

Electrospun β-Mo2C/CNFs as an efficient sulfur host for rechargeable lithium sulfur battery

Zhuang, R., Yao, S., Shen, X., et al. (2019) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-019-00755-w · Cited by 42

A polyimide cathode with superior stability and rate capability for lithium-ion batteries

Zhao, J., Kang, T., Chu, Y., et al. (2019) · Nano Research · doi:10.1007/s12274-019-2306-y · Cited by 42

Carbon confinement synthesis of interlayer-expanded and sulfur-enriched MoS2+x nanocoating on hollow carbon spheres for advanced Li-S batteries

Li, W., Wang, D., Song, Z., Gong, Z., Guo, X., Liu, J., Zhang, Z., & Li, G. (2019) · Nano Research · doi:10.1007/s12274-019-2536-z · Cited by 43

Improving the self-discharge behavior of sulfur-polypyrrole cathode material by LiNO3 electrolyte additive

Kazazi, M., Vaezi, M. R., & Kazemzadeh, A. (2014) · Ionics · doi:10.1007/s11581-014-1095-2 · Cited by 41

Effect of electrode surface treatment on carbon fiber based structural supercapacitors: Electrochemical analysis, mechanical performance and proof-of-concept

Artigas‐Arnaudas, J., Sánchez–Romate, X. F., Sánchez, M., et al. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2022.106599 · Cited by 40

Influence of the binder and preparation process on the positive electrode electrochemical response and Li/S system performances

Waluś, S., Robba, A., Bouchet, R., et al. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.05.130 · Cited by 40

Fabrication of Magnéli phase Ti4O7 nanorods as a functional sulfur material host for lithium-sulfur battery cathode

Yao, S., Guo, R., Wu, Z., et al. (2020) · Journal of Electroceramics · doi:10.1007/s10832-020-00206-7 · Cited by 40

Visualising the problems with balancing lithium–sulfur batteries by “mapping” internal resistance

Lacey, M. J., Edström, K., & Brandell, D. (2015) · Chemical Communications · doi:10.1039/c5cc07167d · Cited by 39

In situ coating of Poly(3,4-ethylenedioxythiophene) on sulfur cathode for high performance lithium–sulfur batteries

Song, J., Noh, H., Lee, J. H., et al. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.092 · Cited by 39

Understanding the high-performance Fe(OH)3@GO nanoarchitecture as effective sulfur hosts for the high capacity of lithium-sulfur batteries

Al-Tahan, M. A., Dong, Y., Zhang, R., et al. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.148032 · Cited by 39

An Experimental Study on Prototype Lithium–Sulfur Cells for Aging Analysis and State-of-Health Estimation

Shateri, N., Auger, D. J., Fotouhi, A., & Brighton, J. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3059738 · Cited by 40

Few-layered V 2 C MXene derived 3D V 3 S 4 nanocrystal functionalized carbon flakes boosting polysulfide adsorption and catalytic conversion towards Li–S batteries

Tan, Z., Liu, S., Zhang, X., et al. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta05602j · Cited by 39

2D graphitic carbon nitride as the efficient cathode material for the non-aqueous rechargeable iron-ion battery under an ambient environment

Yadav, J. K., Rani, B., & Dixit, A. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.232943 · Cited by 38

Electrochemical impedance spectroscopy characterization and parameterization of lithium nickel manganese cobalt oxide pouch cells: dependency analysis of temperature and state of charge

Gopalakrishnan, R., Li, Y., Smekens, J., Barhoum, A., Assche, G. V., Omar, N., & Mierlo, J. V. (2018) · Ionics · doi:10.1007/s11581-018-2595-2 · Cited by 39

Electrochemical Impedance Spectroscopy-Based Electric Circuit Modeling of Lithium–Sulfur Batteries During a Discharging State

Stroe, D., Knap, V., Swierczynski, M. J., et al. (2018) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2018.2864160 · Cited by 38

Nitrogen, sulfur-codoped micro–mesoporous carbon derived from boat-fruited sterculia seed for robust lithium–sulfur batteries

Wu, J., Zhang, Q., Li, M., Yan, J. W., Zhang, Y., Liu, J., & Wu, Y. (2019) · RSC Advances · doi:10.1039/c9ra02037c · Cited by 37

Functionalized bacterial cellulose as a separator to address polysulfides shuttling in lithium–sulfur batteries

Li, W., Wang, S. F., Fan, Z., Li, S., Bernussi, A. A., & Newman, N. (2021) · Materials Today Energy · doi:10.1016/j.mtener.2021.100813 · Cited by 37

Heterogeneous Mediator Enabling Three‐Dimensional Growth of Lithium Sulfide for High‐Performance Lithium–Sulfur Batteries

Tian, D., Song, X., Qiu, Y., et al. (2021) · Energy & environment materials · doi:10.1002/eem2.12236 · Cited by 37

Constructing static two-electron lithium-bromide battery

Li, X., Wang, Y., Lu, J., Li, P. R., Huang, Z., Liang, G., He, H., & Zhi, C. (2024) · Science Advances · doi:10.1126/sciadv.adl0587 · Cited by 40

A Novel Optical Diagnostic for In Situ Measurements of Lithium Polysulfides in Battery Electrolytes

Saqib, N., Silva, C. J., Maupin, C. M., et al. (2017) · Applied Spectroscopy · doi:10.1177/0003702816684638 · Cited by 36

Direct Tracking of Additive‐Regulated Evolution on the Lithium Anode in Quasi‐Solid‐State Lithium–Sulfur Batteries

Liu, G., Wan, J., Shi, Y., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201411 · Cited by 36

Capturing the Current-Overpotential Nonlinearity of Lithium-Ion Batteries by Nonlinear Electrochemical Impedance Spectroscopy (NLEIS) in Charge and Discharge Direction

Ernst, S., Heins, T. P., Schlüter, N., & Schröder, U. (2019) · Frontiers in Energy Research · doi:10.3389/fenrg.2019.00151 · Cited by 37

A Poly(ethylene oxide)/Lithium bis(trifluoromethanesulfonyl)imide-Coated Polypropylene Membrane for a High-Loading Lithium–Sulfur Battery

Chiu, L.-L., & Chung, S. (2021) · Polymers · doi:10.3390/polym13040535 · Cited by 35

Nickel/sulfur composite electroplated nickel foams for the use as 3D cathode in lithium/sulfur batteries – A proof of concept

Sörgel, Ş., Kesten, O., Wengel, A., et al. (2017) · Energy storage materials · doi:10.1016/j.ensm.2017.05.016 · Cited by 35

Modeling the effect of key cathode design parameters on the electrochemical performance of a lithium-sulfur battery

Erisen, N., Emerce, N. B., Erensoy, S. C., et al. (2018) · International Journal of Energy Research · doi:10.1002/er.4045 · Cited by 34

Two Dimensional WS2/C Nanosheets as a Polysulfides Immobilizer for High Performance Lithium-Sulfur Batteries

Majumder, S., Shao, M., Deng, Y., & Chen, G. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0501903jes · Cited by 35

A simple and general approach for in situ synthesis of sulfur–porous carbon composites for lithium–sulfur batteries

Díez, N., Ferrero, G. A., Sevilla, M., & Fuertes, A. B. (2019) · Sustainable Energy & Fuels · doi:10.1039/c9se00722a · Cited by 34

Synthesis and characterization of sulfur–carbon–vanadium pentoxide composites for improved electrochemical properties of lithium–sulfur batteries

Kong, L., Handa, Y., & Taniguchi, I. (2015) · Materials Research Bulletin · doi:10.1016/j.materresbull.2015.08.036 · Cited by 34

Bifunctional Binder with Nucleophilic Lithium Polysulfide Immobilization Ability for High-Loading, High-Thickness Cathodes in Lithium–Sulfur Batteries

Han, P., Chung, S., Chang, C., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b02399 · Cited by 33

An integrated hybrid interlayer for polysulfides/selenides regulation toward advanced Li–SeS2 batteries

Zhang, Y., Zhang, Y., Guo, Y. F., et al. (2020) · Carbon · doi:10.1016/j.carbon.2020.01.102 · Cited by 33

Contribution of different metal nodes on stepwise electrocatalysis in lithium-sulfur batteries

Chen, Y., Kang, Y., Yang, H., et al. (2022) · Energy storage materials · doi:10.1016/j.ensm.2022.10.047 · Cited by 33

Foldable and High Sulfur Loading 3D Carbon Electrode for High-performance Li-S Battery Application

He, N. S. M., Zhong, L., Xiao, M., et al. (2016) · Scientific Reports · doi:10.1038/srep33871 · Cited by 32

Four-electrode symmetric setup for electrochemical impedance spectroscopy study of Lithium–Sulfur batteries

Fang, J., Shen, W., Cheng, S. H. S., et al. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227202 · Cited by 32

A bipolar modified separator using TiO2 nanosheets anchored on N-doped carbon scaffold for high-performance Li–S batteries

Li, N., Chen, F., Chen, X., et al. (2019) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2019.09.012 · Cited by 32

Characterization of the Effect of Cell Design on Li−S Battery Resistance Using Electrochemical Impedance Spectroscopy

Kilic, A., & Eroğlu, D. (2021) · ChemElectroChem · doi:10.1002/celc.202100165 · Cited by 32

Chemically etched CeO2-x nanorods with abundant surface defects as effective cathode additive for trapping lithium polysulfides in Li-S batteries

Wei, Z., & Wang, R. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.01.165 · Cited by 32

Lithium-Ion Battery State of Health Estimation Based on Electrochemical Impedance Spectroscopy and Cuckoo Search Algorithm Optimized Elman Neural Network

Chang, C., Wang, S., Jiang, J., Gao, Y., Jiang, Y., & Liao, L. (2022) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4054128 · Cited by 32

Electrical circuit models for performance modeling of Lithium-Sulfur batteries

Knap, V., Stroe, D., Teodorescu, R., Swierczynski, M. J., & Stanciu, T. (2015) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7309853 · Cited by 32

Developing a Multifunctional Cathode for Photoassisted Lithium–Sulfur Battery

Zhao, F., Yang, K. Q., Liu, Y., et al. (2024) · Advanced Science · doi:10.1002/advs.202402978 · Cited by 31

Sulfur-polyaniline coated mesoporous carbon composite in combination with carbon nanotubes interlayer as a superior cathode assembly for high capacity lithium-sulfur cells

Manoj, M. G., Mannayil, J., Anilkumar, K. M., Abhilash, A., Jinisha, B., Sasikumar, P. V. W., & Jayalekshmi, S. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.07.113 · Cited by 32

High performance lithium-sulfur batteries by facilely coating a conductive carbon nanotube or graphene layer

Yang, Y., Chen, C., Hu, J., et al. (2018) · Chinese Chemical Letters · doi:10.1016/j.cclet.2018.08.013 · Cited by 31

Nanosheets Derived through Dissolution‐Recrystallization of TiB2 as Efficient Anode for Sodium‐Ion Batteries

Suriyakumar, S., Varma, A. K., Surendran, V., et al. (2021) · Batteries & Supercaps · doi:10.1002/batt.202100243 · Cited by 31

Expandable-graphite-derived graphene for next-generation battery chemistries

Zu, C., Li, L., Qie, L., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.03.009 · Cited by 30

Advanced Sulfur-Silicon Full Cell Architecture for Lithium Ion Batteries

Ye, R., Bell, J., Patino, D., Ahmed, K., Ozkan, M., & Ozkan, C. S. (2017) · Scientific Reports · doi:10.1038/s41598-017-17363-5 · Cited by 30

A Li-Li2S4 battery with improved discharge capacity and cycle life at low electrolyte/sulfur ratios

Shen, C., Xie, J., Zhang, M., et al. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.01.029 · Cited by 30

Reliable and valid pyrite electrocatalysts supported on nitrogen-doped porous carbon sheets for advanced lithium sulfur batteries

Li, W., Chen, Z., Wang, D., et al. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.226778 · Cited by 30

Polymeric multilayer-modified manganese dioxide with hollow porous structure as sulfur host for lithium sulfur batteries

He, M., Zuo, P., Zhang, H., et al. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.10.130 · Cited by 29

Review on Non-Invasive Blood Glucose Measurement Techniques

Kumar, D. A., & Jayanthy, T. (2020) · doi:10.1109/iccsp48568.2020.9182268 · Cited by 29

Patch model of a spherical cathode

Raju, R. S. (2010) · doi:10.1109/ivesc.2010.5644428

Numerical Investigation of the Relativistic Magnetron Using a Novel Semitransparent Cathode

Yang, W., Dong, Z., Yang, Y., et al. (2014) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2014.2359434 · Cited by 10

Range and similarity of hollow cathode discharge in argon

Hou, X., Zou, X., Li, Y., et al. (2019) · High Voltage · doi:10.1049/hve.2019.0090 · Cited by 5

A reduced temperature solid oxide fuel cell with three-dimensionally ordered macroporous cathode

Liang, B., Suzuki, T., Hamamoto, K., et al. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.03.107 · Cited by 12

On the electrochemical impedance spectroscopy of direct methanol fuel cell

Lai, C., Lin, J., Hsueh, K., HWANG, C., Tsay, K. C., TSAI, L., & Peng, Y. (2007) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2007.03.040 · Cited by 62