Investigations of lithium–sulfur batteries using electrochemical impedance spectroscopy

Polysulfide Shuttle Study in the Li/S Battery System

Mikhaylik, Y., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,112

Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer

Su, Y., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,467

On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries

Aurbach, D., Gamolsky, K., Markovsky, B., Gofer, Y., Schmidt, M., & Heider, U. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(01)00858-1 · Cited by 996

Lithium/Sulfur Cell Discharge Mechanism: An Original Approach for Intermediate Species Identification

Barchasz, C., Molton, F., Duboc, C., Leprêtre, J., Patoux, S., & Alloin, F. (2012) · Analytical Chemistry · doi:10.1021/ac2032244 · Cited by 958

A Polyaniline‐Coated Sulfur/Carbon Composite with an Enhanced High‐Rate Capability as a Cathode Material for Lithium/Sulfur Batteries

Li, G. C., Li, G., Ye, S. H., & Gao, X. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200017 · Cited by 526

Improved cycling performances of lithium sulfur batteries with LiNO3-modified electrolyte

Liang, X. M., Wen, Z., Liu, Y., Wu, M., Jin, J. H., Zhang, H., & Wu, X. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.027 · Cited by 506

Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries

Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200696 · Cited by 457

New insights into the limiting parameters of the Li/S rechargeable cell

Barchasz, C., Leprêtre, J., Alloin, F., & Patoux, S. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.07.021 · Cited by 398

New insight into the discharge process of sulfur cathode by electrochemical impedance spectroscopy

Yuan, L., Qiu, X., Chen, L., et al. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.033 · Cited by 380

Properties of surface film on lithium anode with LiNO3 as lithium salt in electrolyte solution for lithium–sulfur batteries

Xiong, S., Xie, K., Diao, Y., & Hong, X. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.07.118 · Cited by 371

Research on battery SOH estimation algorithm of energy storage frequency modulation system

Liu, X., Li, J., Yao, Z., Wang, Z., Si, R., & Diao, Y. (2021) · Energy Reports · doi:10.1016/j.egyr.2021.11.015 · Cited by 29

Te0.045S0.955PAN composite with high average discharge voltage for Li–S battery

Wang, K., Guan, Y., Jin, Z., et al. (2019) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2019.03.010 · Cited by 29

Capacity degradation analysis of the rechargeable iron ion batteries using post-mortem analysis and the impedance spectroscopy

Yadav, J. K., Rani, B., & Dixit, A. (2023) · Ionics · doi:10.1007/s11581-023-04925-z · Cited by 28

Sulfur nanosheets deposited on reduced graphene oxide enable excellent cycling life for lithium-sulfur battery

Li, Z., Liang, G., Wang, T., Liu, J., Chang, C., Ao, G., Guan, Z., Tao, T., & Zhu, J. (2024) · Carbon · doi:10.1016/j.carbon.2024.119512 · Cited by 29

Waste cotton cloth derived flexible current collector with optimized electrical properties for high performance lithium–sulfur batteries

Joshi, A., Raulo, A., Bandyopadhyay, S., et al. (2022) · Carbon · doi:10.1016/j.carbon.2022.03.018 · Cited by 28

Sulfur/bamboo charcoal composites cathode for lithium–sulfur batteries

Cheng, J., Pan, Y., Pan, J., et al. (2014) · RSC Advances · doi:10.1039/c4ra12509f · Cited by 28

Determination of Constant Phase Element Parameters under Cyclic Voltammetry Conditions Using a Semi-theoretical Equation

Charoen‐amornkitt, P., Suzuki, T., & Tsushima, S. (2019) · Electrochemistry · doi:10.5796/electrochemistry.18-00082 · Cited by 27

Functionalized Carbon as Polysulfide Traps for Advanced Lithium–Sulfur Batteries

Pongilat, R., Franger, S., & Kalaiselvi, N. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b00605 · Cited by 27

Dual functional effect of the ferroelectricity embedded interlayer in lithium sulfur battery

Son, B. D., Cho, S. H., Bae, K. Y., et al. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.02.014 · Cited by 27

Black phosphorus-modified sulfurized polyacrylonitrile with high C-rate and cycling performance in ether-based electrolyte for lithium sulfur batteries

Ma, S., Wang, Y., Fu, C., et al. (2020) · Chemical Communications · doi:10.1039/d0cc04901h · Cited by 27

Dynamic charge modulate lithium uniform plating functional composite anode for dendrite-free lithium metal batteries

Zhang, W., Fan, Q., Zhang, D., et al. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.107677 · Cited by 26

Separator for lithium-sulfur battery based on polymer blend membrane

Freitag, A., Stamm, M., & Ionov, L. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.077 · Cited by 25

Electrical Transport Mechanisms in Graphene Nanoplatelet Doped Polydimethylsiloxane and Application to Ultrasensitive Temperature Sensors

Sánchez–Romate, X. F., del Bosque, A., Sánchez, M., & Ureña, A. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c22162 · Cited by 25

Carbon fiber-incorporated sulfur/carbon ternary cathode for lithium–sulfur batteries with enhanced performance

Zhang, X., Xie, D., Wang, D., et al. (2016) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-016-3460-8 · Cited by 25

NiCo2S4 Nanosheet with Hexagonal Architectures as an Advanced Cathode for Al-Ion Batteries

Li, S., Tu, J., Zhang, G., et al. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1201814jes · Cited by 25

Improvement of Energy Capacity with Vitamin C Treated Dual‐Layered Graphene–Sulfur Cathodes in Lithium–Sulfur Batteries

Kim, J. W., Ocon, J. D., Kim, H., et al. (2015) · ChemSusChem · doi:10.1002/cssc.201500111 · Cited by 25

Design of Size‐Controlled Sulfur Nanoparticle Cathodes for Lithium‐Sulfur Aviation Batteries

Liu, J., Chang, C., Wang, T., et al. (2023) · Small · doi:10.1002/smll.202300286 · Cited by 24

Rational Design of Graphite Nanoplatelets Interlayers via a Surfactant-Controlled Strategy for Enhancing Lithium–Sulfur Batteries

Chen, M., Fu, X., Taylor, N. D., et al. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b02383 · Cited by 24

Phosphazene based star-branched polymeric cathode materials via inverse vulcanization of sulfur for lithium–sulfur batteries

Yeşi̇lot, S., Küçükköylü, S., Demir, E., et al. (2020) · Polymer Chemistry · doi:10.1039/d0py00490a · Cited by 24

Effect of fibrous separators on the performance of lithium–sulfur batteries

Choudhury, S., Azizi, M., Raguzin, I., et al. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp00310b · Cited by 23

A Protein‐Based Janus Separator for Trapping Polysulfides and Regulating Ion Transport in Lithium−Sulfur Batteries

Chen, M., Fu, X., Liu, J., et al. (2021) · ChemSusChem · doi:10.1002/cssc.202100568 · Cited by 23

Quantifying the chemical, electrochemical heterogeneity and spatial distribution of (poly) sulfide species using Operando SANS

Jafta, C. J., Prévost, S. F., He, L., Li, M., Sun, X., Yang, G. H., Belharouak, I., & Nanda, J. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.05.016 · Cited by 23

Application of Facile Graphene Oxide Binders with Nanocomposites for Efficient Separator Performance in Lithium Sulfur Batteries

Ponnada, S., Kiai, M. S., Gorle, D. B., et al. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01402 · Cited by 23

Revamping Lithium–Sulfur Batteries for High Cell‐Level Energy Density by Synergistic Utilization of Polysulfide Additives and Artificial Solid‐Electrolyte Interphase Layers

Wu, P., Dong, M., Tan, J., et al. (2021) · Advanced Materials · doi:10.1002/adma.202104246 · Cited by 23

Mechanochemical synthesis of colloidal sulfur particles in the Na2S2O3–H2(C4H4O4)–Na2SO3 system

Urakaev, F. K., Булавченко, А. И., Uralbekov, B., et al. (2016) · Colloid Journal · doi:10.1134/s1061933x16020150 · Cited by 23

DMSO/DMF co-solvent precipitated nano-sulfur cathode for highly loading lithium-sulfur pouch cells

Chang, C., Wang, T., Liu, J., et al. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.154785 · Cited by 22

Graphene-like porous carbon-titanium nitride composite as an efficient separator modifier for lithium-sulfur batteries

Sultanov, F. R., Zhumasheva, N., Dangaliyeva, A., et al. (2025) · Nano Energy · doi:10.1016/j.nanoen.2025.111420 · Cited by 22

Synthesis and characterization of electrospun molybdenum dioxide–carbon nanofibers as sulfur matrix additives for rechargeable lithium–sulfur battery applications

Zhuang, R., Yao, S., Jing, M., et al. (2018) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.9.28 · Cited by 22

Carbonate or ether based electrolyte for Li-Se batteries: An in-situ study of intermediate polyselenide formation

Mutlu, T., & Demir‐Cakan, R. (2021) · Electrochimica Acta · doi:10.1016/j.electacta.2021.138825 · Cited by 22

Synergistic design of core–shell V 3 S 4 @C hosts and homogeneous catalysts promoting polysulfide chemisorption and conversion for Li–S batteries

Tan, K., Tan, Z., Liu, S., et al. (2023) · Journal of Materials Chemistry A · doi:10.1039/d2ta09373a · Cited by 22

Proof of concept for a novel, binder-free and conducting carbon-free sulfur battery cathode: Composite electroformation of copper foil with incorporated polythiophene wrapped sulfur particles

Erhardt, C., Sörgel, Ş., Meinhard, S., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.037 · Cited by 22

Comparison of parametrization techniques for an electrical circuit model of Lithium-Sulfur batteries

Knap, V., Stroe, D., Teodorescu, R., Swierczynski, M. J., & Stanciu, T. (2015) · IEEE International Conference on Industrial Informatics (INDIN) · doi:10.1109/indin.2015.7281919 · Cited by 22

Metal–organic framework microdomains in 3D conductive host as polysulfide inhibitor for fast, long-cycle Li–S batteries

Kang, X., Bernardo, I. D., Yang, H., et al. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.147680 · Cited by 22

Research Progress on Improving the Sulfur Conversion Efficiency on the Sulfur Cathode Side in Lithium–Sulfur Batteries

Yang, L., Li, H., Li, Q., Wang, Y., Chen, Y., Wu, Z., Liu, Y., Wang, G., Zhong, B., Xiang, W., et al. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c04960 · Cited by 22

Sulfur Distribution Analysis in Lithium−Sulfur Cathode via Confined Inverse Vulcanization in Carbon Frameworks

Deng, B., Scheiba, F., Zuo, A., et al. (2024) · Advanced Energy Materials · doi:10.1002/aenm.202402996 · Cited by 21

A core–shell cathode substrate for developing high-loading, high-performance lithium–sulfur batteries

Yu, R., Chung, S., Chen, C. H., et al. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta09059a · Cited by 21

Cathodically deposited ZIF-8 compact layer on an 8-µm ultrathin polypropylene separator to enhance the performance of lithium-sulfur and lithium-metal batteries

Lin, X., Baranwal, R. K., Ren, G., et al. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.157192 · Cited by 21

An ant-nest-like cathode substrate for lithium-sulfur batteries with practical cell fabrication parameters

Yu, R., Chung, S., Chen, C. H., et al. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.12.025 · Cited by 21

Electrochemical impedance spectroscopy study of sulfur reduction pathways using a flexible, free-standing and high-sulfur-loading film

Ding, N., Schnell, J., Li, X., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.128559 · Cited by 21

A systematic correlation between morphology of porous carbon cathode and electrolyte in lithium-sulfur battery

Park, J., Yoon, S., Oh, S., et al. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2021.03.036 · Cited by 21

Dielectric Barrier Discharge (DBD) Plasma Coating of Sulfur for Mitigation of Capacity Fade in Lithium–Sulfur Batteries

Shafique, A., Rangasamy, V. S., Vanhulsel, A., et al. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c04069 · Cited by 20

Hydrogen Bond Interaction in the Trade‐Off Between Electrolyte Voltage Window and Supercapacitor Low‐Temperature Performances

Bu, Y., Jiang, W., Liu, H., et al. (2022) · ChemSusChem · doi:10.1002/cssc.202200539 · Cited by 20

Introducing Alternative Algorithms for the Determination of the Distribution of Relaxation Times

Bergmann, T. G., & Schlüter, N. (2022) · ChemPhysChem · doi:10.1002/cphc.202200012 · Cited by 20

Ni-Ce bimetal doping and phosphating modulated MOF with improved catalysis and adsorption for high-performance lithium-sulfur battery applications

Ren, Y., Song, X., Wang, H., et al. (2024) · Electrochimica Acta · doi:10.1016/j.electacta.2024.143991 · Cited by 20

Improved Cycling Performance of Lithium–Sulfur Cell through Supramolecular Interactions

Suriyakumar, S., Madasamy, K., Kathiresan, M., et al. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b08785 · Cited by 20

Electrospun polar-nanofiber PVDF separator for lithium–sulfur batteries with enhanced charge storage capacity and cycling durability

Mohammad, I., Barter, L. D. J., Stolojan, V., et al. (2024) · Energy Advances · doi:10.1039/d3ya00392b · Cited by 19

A high conductive TiC–TiO2/SWCNT/S composite with effective polysulfides adsorption for high performance Li–S batteries

Geng, X., Yi, R., Lin, X., et al. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.156793 · Cited by 19

Discharge Behavior within Lithium–Sulfur Batteries Using Li–Glyme Solvate Ionic Liquids

Watanabe, H., Sugiura, Y., Seki, S., et al. (2023) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.3c00447 · Cited by 19

Highly stable lead-free Cs2AgBiI6-GO composite photocatalysts for efficient organic pollutant degradation

Huang, Q., Liu, J., Qi, F., et al. (2023) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2023.109960 · Cited by 19

Nanosized Ti 4 O 7 supported on carbon nanotubes composite modified separator for enhanced electrochemical properties of lithium sulfur battery

Wu, X. D., Li, S., Yao, S., et al. (2020) · International Journal of Energy Research · doi:10.1002/er.6099 · Cited by 19

Molecular insights into ether-based electrolytes for Li-FeS2 batteries

Sun, K., Wu, Q., & Gan, H. (2017) · Energy storage materials · doi:10.1016/j.ensm.2017.12.003 · Cited by 19

Capacity Estimation and Knee Point Prediction Using Electrochemical Impedance Spectroscopy for Lithium Metal Battery Degradation via Machine Learning

Si, Q., Matsuda, S., Ando, Y., et al. (2025) · Advanced Science · doi:10.1002/advs.202502336 · Cited by 18

High capacity polycarbazole-sulfur cathode for use in lithium-sulfur batteries

Taghartapeh, M. R., Hollenkamp, A. F., Musameh, M. M., et al. (2021) · Electrochimica Acta · doi:10.1016/j.electacta.2021.138898 · Cited by 18

Better performing composite cathode encompassing graphene and magnesium aluminate for Li–S batteries

Suriyakumar, S., Angulakshmi, N., & Stephan, A. M. (2017) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2017.06.001 · Cited by 18

Hierarchical micro-mesoporous carbon prepared from waste cotton textile for lithium-sulfur batteries

Wang, Z., Xue, D., Song, H., et al. (2019) · Ionics · doi:10.1007/s11581-019-02968-9 · Cited by 18

Influence of synthesis parameters on g-C3N4 polysulfides trapping: A systematic study

Versaci, D., Cozzarin, M., Amici, J., Francia, C., Leiva, E. P. M., Visintin, A., & Bodoardo, S. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101169 · Cited by 19

Short Communication: Preparation of ZnO Porous Nanostructures and Its Application in Cathode Material for Lithium Sulfur Battery

Liang, X., Song, Q., Liu, Y.-S., et al. (2015) · International Journal of Electrochemical Science · doi:10.1016/s1452-3981(23)11181-3 · Cited by 18

Peak factor optimization of multi-harmonic signals using artificial bee colony algorithm

Janeiro, F. M., Hu, Y., & Ramos, P. M. (2019) · Measurement · doi:10.1016/j.measurement.2019.107040 · Cited by 17

A triple-functional carbon molecular sieve (CMS) that addresses the performance trilemma in practical lithium sulfur batteries

Ghasemiestahbanati, E., Yoon, Y. H., Lively, R. P., et al. (2022) · Carbon · doi:10.1016/j.carbon.2022.12.040 · Cited by 17

Assembling sulfur spheres on carbon fiber with graphene coated hybrid bulk electrodes for lithium sulfur batteries

Yang, Z.-Z., Wang, H., Zhong, X., et al. (2014) · RSC Advances · doi:10.1039/c4ra09763g · Cited by 17

Investigating the Mechanism of Reversible Lithium Insertion into Anti-NASICON Fe2(WO4)3

Barım, G., Cottingham, P., Zhou, S., Melot, B. C., & Brutchey, R. L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16216 · Cited by 17

Electrochemical analysis of the reaction mechanism of sulfur reduction as a function of state of charge

Schön, P., Hintz, F., & Krewer, U. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.08.153 · Cited by 17

Stabilization of Li–S batteries with a lean electrolyte via ion-exchange trapping of lithium polysulfides using a cationic, polybenzimidazolium binder

Pham, C. V., Liu, L., Britton, B., et al. (2019) · Sustainable Energy & Fuels · doi:10.1039/c9se01092k · Cited by 17

Impact of Sulfur Infiltration Time and Its Content in an N-doped Mesoporous Carbon for Application in Li-S Batteries

Laverde, J., Rosero‐Navarro, N. C., MIURA, A. B., et al. (2022) · Batteries · doi:10.3390/batteries8060058 · Cited by 17

Direct correlation between potentiometric and impedance biosensing of antibody-antigen interactions using an integrated system

Tsai, M., Creedon, N., Brightbill, E. L., Pavlidis, S., Brown, B., Gray, D. W., Shields, N., Sayers, R. G., Mooney, M. H., O'Riordan, A. J., et al. (2017) · Applied Physics Letters · doi:10.1063/1.4986190 · Cited by 17

Nitrogen-doped hierarchical porous carbon derived from CO2 for the high-performance cathode of lithium-sulfur battery

Lee, D., Lee, D., Yang, J., et al. (2025) · Electrochimica Acta · doi:10.1016/j.electacta.2025.145867 · Cited by 16

The catalytic activity of manganese dioxide supported on graphene promoting the electrochemical performance of lithium-sulfur batteries

Xiaoman, L., Zhu, Q., Weimin, G., & Lu, Q. (2019) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2019.03.041 · Cited by 16

Operando characterization of active surface area and passivation effects on sulfur-carbon composites for lithium-sulfur batteries

He, L., Lampkin, J., Chien, Y., et al. (2021) · Electrochimica Acta · doi:10.1016/j.electacta.2021.139572 · Cited by 16

Characterization of electrical properties of organic-rich shales at nano/micro scales

Wang, W., Li, J., Fan, M., & Abedi, S. (2017) · Marine and Petroleum Geology · doi:10.1016/j.marpetgeo.2017.06.021 · Cited by 16

Synthesis of ZIF ‐8 and ZIF ‐L on carbon fiber fabric for supercapacitor structural electrodes

Artigas‐Arnaudas, J., Sánchez, M., & Ureña, A. (2025) · Polymer Composites · doi:10.1002/pc.29720 · Cited by 15

Reasons for the effect of the amount of electrolyte on the performance of lithium–sulfur cells

Kolosnitsyn, V. S., Karaseva, E. V., Kuzmina, E. V., et al. (2016) · Russian Journal of Electrochemistry · doi:10.1134/s1023193516030071 · Cited by 15

Gyroidal Porous Carbon Activated with NH3 or CO2 as Lithium−Sulfur Battery Cathodes

Krüner, B., Dörr, T. S., Shim, H., et al. (2018) · Batteries & Supercaps · doi:10.1002/batt.201800013 · Cited by 15

3D Hierarchically Interconnected Porous Graphene Containing Sulfur for Stable High Rate Li–S Batteries

Qian, W., Gao, Q., Yang, K., Tian, W., Tan, Y., Yang, C., Zhang, H., Li, Z., & Zhu, L. (2016) · Energy Technology · doi:10.1002/ente.201500430 · Cited by 15

Analytical Multimode Scanning and Transmission Electron Imaging and Tomography of Multiscale Structural Architectures of Sulfur Copolymer-Based Composite Cathodes for Next-Generation High-Energy Density Li–S Batteries

Oleshko, V. P., Herzing, A. A., Soles, C. L., et al. (2016) · Microscopy and Microanalysis · doi:10.1017/s1431927616011880 · Cited by 15

Discrete Hollow Carbon Spheres Derived from Pyrolytic Copolymer Microspheres for Li-S Batteries

Choi, Y., Yoon, N., Kim, N., et al. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0151903jes · Cited by 14

Highly sulfur-rich polymeric cathode materials via inverse vulcanization of sulfur for lithium–sulfur batteries

Yeşilot, S., Küçükköylü, S., Mutlu, T., Demir, E., & Demir‐Cakan, R. (2022) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2022.126168 · Cited by 15

Development of a Hybrid Adaptive Neuro-fuzzy Inference System with Coulomb-Counting State-of-Charge Estimator for Lithium–Sulphur Battery

Valencia, N., Fotouhi, A., Shateri, N., & Auger, D. J. (2022) · International Journal of Fuzzy Systems · doi:10.1007/s40815-022-01403-y · Cited by 15

Hybrid Organosulfur Network/MWCNT Composite Cathodes for Li–S Batteries

Choudhury, S., Akef, M., Seifert, A., et al. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c09316 · Cited by 14

Skeleton of PVDF-HFP/PEO for high-performance lithium‑sulfur battery cathode

Yang, H., Wang, T., Chang, C., et al. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113631 · Cited by 14

A High‐Performance and Fast‐Charging Rechargeable Iron‐Ion Battery Using V 2 O 5 Porous Microspheres Cathode

Yadav, J. K., Rani, B., Saini, P., et al. (2024) · Energy Technology · doi:10.1002/ente.202401334 · Cited by 14

A multi-functional sulfurized polyacrylonitrile interlayer for lithium sulfur batteries

Wang, F., & He, X. (2019) · Materials Letters · doi:10.1016/j.matlet.2019.126604 · Cited by 14

Investigation of the Effect of Temperature on Lithium‐Sulfur Cell Cycle Life Performance Using System Identification and X‐Ray Tomography

Shateri, N., Auger, D. J., Fotouhi, A., Brighton, J., Du, W., Owen, R. E., Brett, D. J. L., & Shearing, P. R. (2022) · Batteries & Supercaps · doi:10.1002/batt.202200035 · Cited by 17

Thermal characterization of Li/sulfur cells using isothermal micro-calorimetry

Seo, J., Kim, C.-S., Prakash, J., et al. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.03.011 · Cited by 14

Polypyrrole-modified carbon nanotubes@manganese dioxide@sulfur composite for lithium–sulfur batteries

Lu, Q., Zhu, Q., Guo, W., et al. (2019) · Ionics · doi:10.1007/s11581-019-02847-3 · Cited by 14

A Multidimensional Operando Study Showing the Importance of the Electrode Macrostructure in Lithium Sulfur Batteries

Jafta, C. J., Hilger, A., Sun, X., et al. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c01027 · Cited by 14

Stable cycling of lithium-sulfur batteries by optimizing the cycle condition

Shen, C., Andrei, P., & Zheng, J. P. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.134948 · Cited by 14

Impact of Different Conductive Polymers on the Performance of the Sulfur Positive Electrode in Li–S Batteries

Shafique, A., Vanhulsel, A., Rangasamy, V. S., et al. (2022) · ACS Applied Energy Materials · doi:10.1021/acsaem.2c00270 · Cited by 13

Polyaniline modified waste‐derived graphene/sulfur nanocomposite cathode for lithium–sulfur batteries

Ponmani, P., Bahadur, J., Tewari, C., Gupta, D. K., Kalita, U., Jegadeesan, P., Ravindran, T. R., Alex, A., Das, A., Sahoo, N., et al. (2023) · Journal of Polymer Science · doi:10.1002/pol.20220709 · Cited by 13

Eucommia leaf residue-derived hierarchical porous carbon by KCl and CaCl2 Co-auxiliary activation for lithium sulfur batteries

Yang, Y. K., Yang, R., Fan, C., et al. (2022) · Materials Characterization · doi:10.1016/j.matchar.2022.112522 · Cited by 13

Carbon nanotube-embedded hollow carbon nanofibers as efficient hosts for advanced lithium–sulfur batteries

Lv, C., Cao, H., Deng, W. P., Zhao, M., Miao, Y., Guo, C., Liu, P., & Wu, Y. (2023) · Dalton Transactions · doi:10.1039/d3dt00288h · Cited by 13

Carbon nitride based mesoporous materials as cathode matrix for high performance lithium–sulfur batteries

Li, X., Xu, C., Zhao, K., et al. (2016) · RSC Advances · doi:10.1039/c5ra26877j · Cited by 13

Novel Sulfur/Ethylenediamine-Functionalized Reduced Graphene Oxide Composite as Cathode Material for High-performance Lithium-Sulfur Batteries

Chen, Z., Sun, Z., Zhang, Y., et al. (2018) · Nanomaterials · doi:10.3390/nano8050303 · Cited by 13

Fe3O4-seated rGO–sulfur complex as a potential cathode material for lithium–sulfur batteries

Suriyakumar, S., Rani, G. J., & Stephan, A. M. (2020) · Ionics · doi:10.1007/s11581-019-03405-7 · Cited by 13

Small-Perturbation Electrochemical Impedance Spectroscopy System With High Accuracy for High-Capacity Batteries in Electric Vehicles

Lee, Y. C., Jo, S.-W., Rahim, G., Lee, S., & Kwon, K. (2024) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2024.3436676 · Cited by 12

Amino Acid as a Multifunctional Electrolyte Additive for Enhancing Li-S Battery Performance

Zhong, J. T., Ren, L., Ying, C., Guo, Y., Liu, J., & Zhong, W.-H. K. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.115251 · Cited by 13

Ultrasmall titanium oxide/titanium oxynitride composite nanoparticle-embedded carbon nanofiber mats as high-capacity and free-standing electrodes for lithium sulfur batteries

Lee, C.-L., Kim, C., & Kim, I. (2017) · RSC Advances · doi:10.1039/c7ra00877e · Cited by 12

Improved electrochemical behavior of Li–S battery with functional WS2@PB–PPy–modified separator

Wang, G., Jiao, Q. Z., Zhang, Z., et al. (2021) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2021.100145 · Cited by 12

An Experimentally Parameterized Equivalent Circuit Model of a Solid-State Lithium-Sulfur Battery

Cleary, T., Nozarijouybari, Z., Wang, D., et al. (2022) · Batteries · doi:10.3390/batteries8120269 · Cited by 12

Mesopore Channel Length Control in Ordered Mesoporous Carbon Hosts for High Performance Lithium-Sulfur Batteries

Lee, B., Park, H., Yang, D., et al. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0391903jes · Cited by 12

Improving the polysulfide barrier by efficient carbon nanofibers coating on separator/cathode for Li-S batteries

García-Soriano, F. J., Para, M. L., Luque, G. L., Barraco, D. E., Leiva, E. P. M., & Lener, G. (2020) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-020-04749-1 · Cited by 12

Patch model of a spherical cathode

Raju, R. S. (2010) · doi:10.1109/ivesc.2010.5644428

Numerical Investigation of the Relativistic Magnetron Using a Novel Semitransparent Cathode

Yang, W., Dong, Z., Yang, Y., et al. (2014) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2014.2359434 · Cited by 10

Range and similarity of hollow cathode discharge in argon

Hou, X., Zou, X., Li, Y., et al. (2019) · High Voltage · doi:10.1049/hve.2019.0090 · Cited by 5

A reduced temperature solid oxide fuel cell with three-dimensionally ordered macroporous cathode

Liang, B., Suzuki, T., Hamamoto, K., et al. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.03.107 · Cited by 12

On the electrochemical impedance spectroscopy of direct methanol fuel cell

Lai, C., Lin, J., Hsueh, K., HWANG, C., Tsay, K. C., TSAI, L., & Peng, Y. (2007) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2007.03.040 · Cited by 62