Improving the melting performance of a horizontal shell-tube latent-heat thermal energy storage unit using local enhanced finned tube
The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Abstract
Abstract Latent heat thermal energy storage (LHTES) with novel fin configuration to enhance heat transfer was proposed. The fins were placed in the lower half of the LHTES unit and were symmetrical along the vertical centerline. A transient two-dimensional numerical model was developed to study the melting characteristics of lauric acid (phase change material, PCM). The local double-fin at different fined angles (θ = 30°, 60°, 90°, 120°, 150° and 180°) were investigated and the results were compared with the uniform double-fin (base case), in which the two fins were placed on the top and bottom. It was found that with special θ, using local double-fin can greatly enhance melting than using the uniformly arranged. The effects of shell conductivity, dimensionless fin length (l) and heat-transfer fluid temperature on PCM melting were investigated. Results showed that the conductivity of shell had a remarkable effect on the melting behaviors and the performance of local double-fin. The complete melting time for the optimum θ can be saved by 66.7% when the dimensionless fin length increases from 0.50 (optimum at θ = 30°) to 1.00 (optimum at θ = 120°). The complete melting time decreases by 53.1% when heat-transfer fluid temperature increases from 333.15 to 353.15 K under l = 1.00 and θ = 120° Furthermore, it was found that the use of longer fins can improve the LHTES performance more greatly for the local double-fin than that of the base case.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Brent, A. D., Voller, V. R., & Reid, K. J. (1988) · Numerical Heat Transfer · doi:10.1080/10407788808913615 · Cited by 1,699
Liu, M., Saman, W., & Bruno, F. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.020 · Cited by 864
Khan, Z., Khan, Z., & Ghafoor, A. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.045 · Cited by 765
Enhance heat transfer for PCM melting in triplex tube with internal–external fins
Mat, S., Al-Abidi, A. A., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.05.003 · Cited by 604
Maximization of performance of a PCM latent heat storage system with innovative fins
Sciacovelli, A., Gagliardi, F., & Verda, V. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.07.015 · Cited by 603
A review on supercooling of Phase Change Materials in thermal energy storage systems
Safari, A., Saidur, R., Sulaiman, F. A., Xu, Y., & Dong, J. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.272 · Cited by 594
Ismail, K. A. R., Alves, C. L. F., & Modesto, M. S. (2001) · Applied Thermal Engineering · doi:10.1016/s1359-4311(00)00002-8 · Cited by 459
Yang, X., Lu, Z., Bai, Q., Zhang, Q., Jin, L., & Yan, J. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.007 · Cited by 458
Experimental evaluation of commercial heat exchangers for use as PCM thermal storage systems
Medrano, M., Yilmaz, M. O., Nogués, M., Martorell, I., Roca, J., & Cabeza, L. F. (2009) · Applied Energy · doi:10.1016/j.apenergy.2009.01.014 · Cited by 448
Kamkari, B., Shokouhmand, H., & Bruno, F. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.01.014 · Cited by 434
Thermal performance enhancement of shell and tube Latent Heat Storage Unit using longitudinal fins
Rathod, M. K., & Banerjee, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.10.074 · Cited by 427
Abdulateef, A. M., Mat, S., Abdulateef, J., Sopian, K., & Al-Abidi, A. A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.07.009 · Cited by 425
Thermal performance of copper foam/paraffin composite phase change material
Zheng, H., Wang, C., Liu, Q., Tian, Z., & Fan, X. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.12.023 · Cited by 404
Experimental study of melting and solidification of PCM in a triplex tube heat exchanger with fins
Al-Abidi, A. A., Mat, S., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2013.09.007 · Cited by 402
Al-Abidi, A. A., Mat, S., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.02.030 · Cited by 387
Seddegh, S., Wang, X., & Henderson, A. D. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.09.107 · Cited by 361
Pizzolato, A., Sharma, A., Maute, K., Sciacovelli, A., & Verda, V. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.10.050 · Cited by 344
Shokouhmand, H., & Kamkari, B. (2013) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2013.06.010 · Cited by 343
Rabienataj Darzi, A. A., Jourabian, M., & Farhadi, M. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.04.016 · Cited by 329
Non-uniform heat transfer suppression to enhance PCM melting by angled fins
Ji, C., Qin, Z., Low, Z., Dubey, S., Choo, F. H., & Duan, F. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.10.030 · Cited by 312
Constrained and unconstrained melting inside a sphere
Tan, F. L. (2007) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2007.09.008 · Cited by 239
Yuan, Y., Cao, X., Xiang, B., & Du, Y. (2016) · Solar Energy · doi:10.1016/j.solener.2016.07.014 · Cited by 225
Mahdi, J. M., & Nsofor, E. C. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.02.016 · Cited by 224
Experimental and numerical evaluation of longitudinally finned latent heat thermal storage systems
Hosseini, M. J., Ranjbar, A. A., Rahimi, M., & Bahrampoury, R. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.04.045 · Cited by 214
Tao, Y. B., & He, Y. L. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.01.008 · Cited by 199
Zhao, D., & Tan, G. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.10.051 · Cited by 193
Mahdi, J. M., & Nsofor, E. C. (2017) · Energy · doi:10.1016/j.energy.2017.03.060 · Cited by 192
Numerical study of PCM solidification in a finned tube thermal storage including natural convection
Jmal, I., & Baccar, M. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.03.065 · Cited by 188
Numerical investigation of PCM melting process in sleeve tube with internal fins
Wang, P., Yao, H., Lan, Z., Peng, Z., Huang, Y., & Ding, Y. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.12.042 · Cited by 188
Sheikholeslami, M., Lohrasbi, S., & Ganji, D. D. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.06.158 · Cited by 185
Abdulateef, A. M., Mat, S., Sopian, K., Abdulateef, J., & Gitan, A. A. (2017) · Solar Energy · doi:10.1016/j.solener.2017.06.024 · Cited by 178
Numerical investigation of the phase change process of low melting point metal
Yang, X.-H., Tan, S.-C., & Liu, J. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.04.109 · Cited by 160
Improvement of longitudinal fins configuration in latent heat storage systems
Kazemi, M., Hosseini, M. J., Ranjbar, A. A., & Bahrampoury, R. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.10.006 · Cited by 156
Zheng, Z., Xu, Y., & Li, M.-J. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.126 · Cited by 155
Yazıcı, M. Y., Avcı, M., Aydın, O., & Akgün, M. (2014) · Solar Energy · doi:10.1016/j.solener.2014.01.007 · Cited by 142
Review on transportable phase change material in thermal energy storage systems
Tay, N. H. S., Liu, M., Belusko, M., & Bruno, F. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.10.069 · Cited by 138
Cao, X., Yuan, Y., Xiang, B., Sun, L., & Xingxing, Z. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.10.029 · Cited by 135
Tiari, S., & Qiu, S. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.08.004 · Cited by 130
Parsazadeh, M., & Duan, X. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.09.133 · Cited by 122
Motahar, S., Alemrajabi, A. A., & Khodabandeh, R. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.01.051 · Cited by 117
Li, Z., & Wu, Z. (2015) · Solar Energy · doi:10.1016/j.solener.2015.09.019 · Cited by 117
Khan, Z., Khan, Z., & Tabeshf, K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.09.030 · Cited by 101
An effectiveness-NTU technique for characterising a finned tubes PCM system using a CFD model
Tay, N. H. S., Belusko, M., Castell, A., Cabeza, L. F., & Bruno, F. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.06.041 · Cited by 79
Gasia, J., Tay, N. H. S., Belusko, M., Cabeza, L. F., & Bruno, F. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.10.042 · Cited by 77
Use of partial load operating conditions for latent thermal energy storage management
Gasia, J., de Gracia, Á., Peiró, G., Arena, S., Cau, G., & Cabeza, L. F. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.02.061 · Cited by 36
Cited by
A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage
Rostami, S., Afrand, M., Shahsavar, A., Sheikholeslami, M., Kalbasi, R., Aghakhani, S., Shadloo, M. S., & Oztop, H. F. (2020) · Energy · doi:10.1016/j.energy.2020.118698 · Cited by 444
Nakhchi, M. E., Hatami, M., & Rahmati, M. (2021) · Energy · doi:10.1016/j.energy.2020.119112 · Cited by 78
Effect of geometric parameter and nanoparticles on PCM melting in a vertical shell-tube system
Nie, C., Liu, J., & Deng, S. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.116290 · Cited by 75
Self-citation
Metadata
- Authors
- Deng, S., Nie, C., Wei, G., & Ye, W.-B.
- Venue
- Energy and Buildings
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 183
- Pages
- 161-173
- ISSN
- 0378-7788 (ISSN-L)
- OpenAlex
- W2901315565
- Cited by
- 196
- References
- 45
- FWCI
- 10.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.