Parametric investigations to enhance thermal performance of paraffin through a novel geometrical configuration of shell and tube latent thermal storage system
Open accessThe DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
This paper presents a two-dimensional finite element computational model which investigates thermal behaviour of a novel geometrical configuration of shell and tube based latent heat storage (LHS) system. Commercial grade paraffin is used as a phase change material (PCM) with water is employed as a heat transfer fluid (HTF). In this numerical analysis, the parametric investigations are conducted to identify the enhancement in melting rate and thermal storage capacity. The parametric investigations are comprised of number and orientation of tube passes in the shell, longitudinal fins length and thickness, materials for shell, tube and fins, and inlet temperature of HTF. Numerical analysis revealed that the melting rate is significantly enhanced by increasing the number of tube passes from 9 to 21. In 21 passes configuration, conduction heat transfer is the dominant and effective mode of heat transfer. The length of fins has profound impact on melting rate as compared to fins thickness. Also, the reduction in thermal storage capacity due to an increase in fins length is minimal to that of increase in fins thickness. The influence of several materials for shell, tube and fins are examined. Due to higher thermal conductivity, the melting rate for copper and aluminium is significantly higher than steel AISI 4340, cast iron, tin and nickel. Similarly, the thermal storage capacity and melting rate of LHS system is increased by a fraction of 18.06% and 68.8% as the inlet temperature of HTF is increased from 323.15 K to 343.15 K, respectively. This study presents an insight into how to augment the thermal behaviour of paraffin based LHS system and ultimately, these findings inform novel design solutions for wide-ranging practical utilisation in both domestic and commercial heat storage applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Khan, Z., Khan, Z., & Ghafoor, A. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.045 · Cited by 765
Self-citationThermal conductivity enhancement of phase change materials for thermal energy storage: A review
Liu, L., Su, D., Tang, Y., & Fang, G. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.04.057 · Cited by 410
Tiari, S., Qiu, S., & Mahdavi, M. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.053 · Cited by 296
Tian, B., Yang, W., Luo, L., Wang, J., Zhang, K., Fan, J., Wu, J., & Xing, T. (2016) · Solar Energy · doi:10.1016/j.solener.2016.01.011 · Cited by 184
Tiari, S., Qiu, S., & Mahdavi, M. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.04.025 · Cited by 150
Cited by
Latent Heat Thermal Energy Storage Systems with Solid–Liquid Phase Change Materials: A Review
Zhang, N., Yuan, Y., Cao, X., Du, Y., Zhang, Z., & Gui, Y. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700753 · Cited by 504
Liu, Y., Zheng, R., & Li, J. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112783 · Cited by 276
Optical and thermal performance of glazing units containing PCM in buildings: a review
Li, D., Wu, Y., Wang, B., Liu, C., & Arıcı, M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117327 · Cited by 216
Deng, S., Nie, C., Wei, G., & Ye, W.-B. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2018.11.018 · Cited by 196
Khatibi, M., Nemati-Farouji, R., Taheri, A., Kazemian, A., Ma, T., & Niazmand, H. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2020.102055 · Cited by 84
Metadata
- Authors
- Khan, Z., Khan, Z., & Tabeshf, K.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2016-11
- Volume
- 127
- Pages
- 355-365
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W2519908426
- Cited by
- 101
- References
- 7
- FWCI
- 8.26
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.