Improving the melting performance of a horizontal shell-tube latent-heat thermal energy storage unit using local enhanced finned tube
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Abstract Latent heat thermal energy storage (LHTES) with novel fin configuration to enhance heat transfer was proposed. The fins were placed in the lower half of the LHTES unit and were symmetrical along the vertical centerline. A transient two-dimensional numerical model was developed to study the melting characteristics of lauric acid (phase change material, PCM). The local double-fin at different fined angles (θ = 30°, 60°, 90°, 120°, 150° and 180°) were investigated and the results were compared with the uniform double-fin (base case), in which the two fins were placed on the top and bottom. It was found that with special θ, using local double-fin can greatly enhance melting than using the uniformly arranged. The effects of shell conductivity, dimensionless fin length (l) and heat-transfer fluid temperature on PCM melting were investigated. Results showed that the conductivity of shell had a remarkable effect on the melting behaviors and the performance of local double-fin. The complete melting time for the optimum θ can be saved by 66.7% when the dimensionless fin length increases from 0.50 (optimum at θ = 30°) to 1.00 (optimum at θ = 120°). The complete melting time decreases by 53.1% when heat-transfer fluid temperature increases from 333.15 to 353.15 K under l = 1.00 and θ = 120° Furthermore, it was found that the use of longer fins can improve the LHTES performance more greatly for the local double-fin than that of the base case.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Khan, Z., Khan, Z., & Ghafoor, A. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.045 · Cited by 765
Tiari, S., & Qiu, S. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.08.004 · Cited by 130
Cited by
A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage
Rostami, S., Afrand, M., Shahsavar, A., Sheikholeslami, M., Kalbasi, R., Aghakhani, S., Shadloo, M. S., & Oztop, H. F. (2020) · Energy · doi:10.1016/j.energy.2020.118698 · Cited by 444
Nakhchi, M. E., Hatami, M., & Rahmati, M. (2021) · Energy · doi:10.1016/j.energy.2020.119112 · Cited by 78
Effect of geometric parameter and nanoparticles on PCM melting in a vertical shell-tube system
Nie, C., Liu, J., & Deng, S. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.116290 · Cited by 75
Self-citation
Metadata
- Authors
- Deng, S., Nie, C., Wei, G., & Ye, W.-B.
- Venue
- Energy and Buildings
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 183
- Pages
- 161-173
- ISSN
- 0378-7788 (ISSN-L)
- OpenAlex
- W2901315565
- Cited by
- 196
- References
- 2
- FWCI
- 10.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Improving the melting performance of a horizontal shell-tube latent-heat thermal energy storage unit using local enhanced finned tube. https://app.cochat.ai/papers/10.1016/j.enbuild.2018.11.018
- The paper
- Deng, S., Nie, C., Wei, G., & Ye, W.-B. (2019). Improving the melting performance of a horizontal shell-tube latent-heat thermal energy storage unit using local enhanced finned tube. Energy and Buildings. https://doi.org/10.1016/j.enbuild.2018.11.018
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.