The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Melting and solidification of PCM embedded in porous metal foam in horizontal multi-tube heat storage system
Abstract
Abstract In this paper, melting and solidification processes of phase change material embedded in metallic porous foam in a multi-tube heat exchanger are investigated numerically under local non-equilibrium thermal condition. RT 35 is used as phase change material in middle shell of 3D multi-tube heat exchanger. Also, water flows across inner tube/tubes and outer tube as a heat transfer fluid (HTF). The effects of number of inner tubes, their arrangement as well as porosity of metallic foam on thermal characteristics of heat storage unit are studied. Results show that increasing number of inner tubes and adding metallic foam enhance melting and solidification rates significantly. A composite of phase change material/metallic foam with porosity of e = 0.7 engenders shorter melting and solidification time comparing to pure PCM. Arrangement of inner tubes has no effect on melting rate of metal foam/PCM composite. By inserting metallic foam with porosities e = 0.9 and e = 0.7 , melting time is decreased by 14% and 55%, respectively. Highest melting rate is for case with four inner tubes for all porosities of metallic foam. Regarding solidification process in pure PCM, case with four tubes shows shorter solidification time. Also, highest solidification rate amid composites of phase change material/metallic foam is seen for case with three tubes. Consequently, inserting metallic foam is more efficient in solidification process rather than the melting one. Moreover, increasing number of inner tubes has more influence on phase change rates in metal foam/PCM composites compared to pure PCM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Heat Transfer from Tubes in Crossflow
Žukauskas, A. (1972) · Advances in Heat Transfer · doi:10.1016/s0065-2717(08)70038-8 · Cited by 1,408
Forced Convection in High Porosity Metal Foams
Calmidi, V. V., & Mahajan, R. L. (2000) · Journal of Heat Transfer · doi:10.1115/1.1287793 · Cited by 1,166
Zhao, C. Y., Lu, W., & Tian, Y. (2010) · Solar Energy · doi:10.1016/j.solener.2010.04.022 · Cited by 757
Enhance heat transfer for PCM melting in triplex tube with internal–external fins
Mat, S., Al-Abidi, A. A., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.05.003 · Cited by 604
Zhang, P., Meng, Z. N., Zhu, H., Wang, Y. L., & Peng, S. P. (2017) · Applied Energy · doi:10.1016/j.apenergy.2015.10.075 · Cited by 497
Tian, Y., & Zhao, C. Y. (2011) · Energy · doi:10.1016/j.energy.2011.07.019 · Cited by 495
Al-Waeli, A. H. A., Sopian, K., Chaichan, M. T., Kazem, H. A., Ibrahim, A., Mat, S., & Ruslan, M. H. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.09.032 · Cited by 433
Liu, Z., Yao, Y., & Wu, H. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.02.022 · Cited by 405
Thermal performance of copper foam/paraffin composite phase change material
Zheng, H., Wang, C., Liu, Q., Tian, Z., & Fan, X. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.12.023 · Cited by 404
Al-Abidi, A. A., Mat, S., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.02.030 · Cited by 387
Cited by
A comparative study on battery thermal management using phase change material (PCM)
Verma, A., Shashidhara, S., & Rakshit, D. (2019) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2019.03.003 · Cited by 315
Effect of geometric parameter and nanoparticles on PCM melting in a vertical shell-tube system
Nie, C., Liu, J., & Deng, S. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.116290 · Cited by 75
Metadata
- Authors
- Esapour, M., Hamzehnezhad, A., Rabienataj Darzi, A. A., & Jourabian, M.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 171
- Pages
- 398-410
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W2805264571
- Cited by
- 342
- References
- 25
- FWCI
- 18.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Melting and solidification of PCM embedded in porous metal foam in horizontal multi-tube heat storage system. https://app.cochat.ai/papers/10.1016/j.enconman.2018.05.086
- The paper
- Esapour, M., Hamzehnezhad, A., Rabienataj Darzi, A. A., & Jourabian, M. (2018). Melting and solidification of PCM embedded in porous metal foam in horizontal multi-tube heat storage system. Energy Conversion and Management. https://doi.org/10.1016/j.enconman.2018.05.086
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.