Microwave co-pyrolysis of waste polyolefins and waste cooking oil: Influence of N2 atmosphere versus vacuum environment
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Abstract Microwave co-pyrolysis (MCP) of waste cooking oil (WCO) and waste polyolefins (WP) was examined for its potential to convert these wastes into liquid fuel. The influence of performing the pyrolysis process under N 2 atmosphere and vacuum environment was investigated with emphasis on the temperature profile, heating rate, and the yield and properties of the liquid oil obtained. Different ratios of WP to WCO (1:2, 1:1.5, 1:1, 1.5:1, and 2:1) were also investigated. MCP performed under vacuum environment recorded higher heating rates (20–24 °C/min) and higher yield of liquid oil (up to 62 wt.%) compared to that performed under N 2 atmosphere (18–22 °C/min of heating rate and 24–50 wt.% of liquid oil). The high heating rate resulted in shorter reaction time and lower power consumption, leading to lower energy consumption by the pyrolysis process. The liquid oil comprised C 13 –C 24 hydrocarbons (aliphatics, aromatics) within the hydrocarbon range of diesel fuel. It also showed promising green properties comprising low nitrogen and oxygen content, and free of sulphur. Combined with the detection of high energy content (42–49 MJ/kg) and low moisture content (
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Sun, L., & Qiu, K. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.07.114 · Cited by 493
Liew, R. K., Nam, W. L., Chong, M. Y., Phang, X. Y., Su, M. H., Yek, P. N. Y., Ma, N. L., Cheng, C. K., Chong, C. T., & Lam, S. S. (2018) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2017.10.005 · Cited by 315
Self-citationMunicipal waste leachate conversion via catalytic supercritical water gasification process
Molino, A., Migliori, M., Blasi, A., Davoli, M., Marino, T., Chianese, S., Catizzone, E., & Giordano, G. (2017) · Fuel · doi:10.1016/j.fuel.2017.05.091 · Cited by 52
Cited by
Foong, S. Y., Liew, R. K., Yang, Y., Cheng, Y. W., Yek, P. N. Y., Wan Mahari, W. A., Lee, X. Y., Han, C. S., Vo, D.-V. N., Van Le, Q., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124401 · Cited by 749
Self-citationReactor technologies for biodiesel production and processing: A review
Tabatabaei, M., Aghbashlo, M., Dehhaghi, M., Panahi, H. K. S., Mollahosseini, A., Hosseini, M., & Soufiyan, M. M. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.06.001 · Cited by 483
Arpia, A. A., Chen, W.-H., Lam, S. S., Rousset, P., & de Luna, M. D. G. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126233 · Cited by 375
Self-citationRyu, H. W., Kim, D. H., Jae, J., Lam, S. S., Park, E. D., & Park, Y.-K. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123473 · Cited by 336
Self-citationGe, S., Yek, P. N. Y., Cheng, Y. W., Xia, C., Wan Mahari, W. A., Liew, R. K., Peng, W., Yuan, T.-Q., Tabatabaei, M., Aghbashlo, M., et al. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110148 · Cited by 329
Self-citation
Metadata
- Authors
- Wan Mahari, W. A., Chong, C. T., Lam, W. H., Anuar, T. N. S. T., Ma, N. L., Ibrahim, M. D., & Lam, S. S.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 171
- Pages
- 1292-1301
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W2810130212
- Cited by
- 141
- References
- 5
- FWCI
- 7.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.