The DOI matches its Crossref record; 68 of the 68 references it cites were found in a registry or an index.
Pyrolysis behavior and product distributions of biomass six group components: Starch, cellulose, hemicellulose, lignin, protein and oil
Abstract
Abstract Pyrolysis of more biomass group components should be studied in order to obtain a more comprehensive understanding of various biomass pyrolysis. In this study, chemical properties of six biomass group components, namely, starch, cellulose, Hemicellulose (Hem), lignin, protein and oil, were evaluated and their pyrolysis behavior, gaseous product evolution, kinetics and product distributions were investigated using TG-FTIR and Py-GC/MS. The results indicated that their devolatilization sensitivity to heating rate followed the order of Hem > starch > oil > cellulose ≈ protein > lignin. Kinetic results revealed that it was difficult to pyrolyze for biomass rich in oil and lignin but easy to pyrolyze for biomass rich in cellulose, starch, Hem and protein. During their pyrolysis, polysaccharides (starch, cellulose and Hem) mainly generated oxygen-containing components such as C O and O-heterocycles; lignin mainly contributed to the formation of phenols (up to 81.4%); protein produced nitrogen-containing components (up to 52.71%), including N-heterocycles, pyrroles, pyridines, nitriles, and amines/amides; oil generated large quantities of alkenes (46.48%). Finally, this research would serve to gain further insight into biomass pyrolysis containing different group components.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Vyazovkin, S., Burnham, A. K., Criado, J. M., Pérez-Maqueda, L. A., Popescu, C., & Sbirrazzuoli, N. (2011) · Thermochimica Acta · doi:10.1016/j.tca.2011.03.034 · Cited by 5,961
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,595
Collard, F.-X., & Blin, J. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.06.013 · Cited by 1,905
A comprehensive review on the pyrolysis of lignocellulosic biomass
Dhyani, V., & Bhaskar, T. (2018) · Renewable Energy · doi:10.1016/j.renene.2017.04.035 · Cited by 1,545
Mechanism study of wood lignin pyrolysis by using TG–FTIR analysis
Liu, Q., Wang, S., Zheng, Y., Luo, Z., & Cen, K. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.03.007 · Cited by 965
An Overview of Biomass Pyrolysis
Demirbas, A., & Arin, G. (2002) · Energy Sources · doi:10.1080/00908310252889979 · Cited by 847
Thermogravimetric analysis and kinetic study of poplar wood pyrolysis
Slopiecka, K., Bartocci, P., & Fantozzi, F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.12.056 · Cited by 831
Ma, Z., Chen, D., Gu, J., Bao, B., & Zhang, Q. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.09.074 · Cited by 708
Reaction mechanisms and multi-scale modelling of lignocellulosic biomass pyrolysis
Anca-Couce, A. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.10.002 · Cited by 664
Catalytic pyrolysis of individual components of lignocellulosic biomass
Wang, K., Kim, K. H., & Brown, R. C. (2014) · Green Chem. · doi:10.1039/c3gc41288a · Cited by 512
Product distribution from fast pyrolysis of glucose-based carbohydrates
Patwardhan, P. R., Satrio, J. A., Brown, R. C., & Shanks, B. H. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.08.007 · Cited by 469
Pasangulapati, V., Ramachandriya, K. D., Kumar, A., Wilkins, M. R., Jones, C. L., & Huhnke, R. L. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.03.036 · Cited by 385
Xu, F., Wang, B., Yang, D., Hao, J., Qiao, Y., & Tian, Y. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.06.047 · Cited by 372
Self-citationPyrolysis behaviors of four lignin polymers isolated from the same pine wood
Wang, S., Ru, B., Lin, H., Sun, W., & Luo, Z. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.01.127 · Cited by 348
The pyrolysis chemistry of a β-O-4 type oligomeric lignin model compound
Chu, S., Subrahmanyam, A. V., & Huber, G. W. (2013) · Green Chem. · doi:10.1039/c2gc36332a · Cited by 331
Shen, D., Jin, W., Hu, J., Xiao, R., & Luo, K. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.06.054 · Cited by 284
Hydration properties of xylan-type structures: an FTIR study of xylooligosaccharides
Kačuráková, M., Belton, P. S., Wilson, R. H., Hirsch, J., & Ebringerová, A. (1998) · Journal of the Science of Food and Agriculture · doi:10.1002/(sici)1097-0010(199805)77:1<38::aid-jsfa999>3.0.co;2-5 · Cited by 270
Quan, C., Gao, N., & Song, Q. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.07.005 · Cited by 264
Nitrogen evolution from coal, peat and wood during gasification: Literature review
Leppälahti, J., & Koljonen, T. (1995) · Fuel Processing Technology · doi:10.1016/0378-3820(94)00123-b · Cited by 260
A Combined Overview of Combustion, Pyrolysis, and Gasification of Biomass
Akhtar, A., Krepl, V., & Ivanova, T. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b01678 · Cited by 243
Wang, X., Sheng, L., & Yang, X. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.01.018 · Cited by 230
Pyrolysis behaviors of four O-acetyl-preserved hemicelluloses isolated from hardwoods and softwoods
Wang, S., Ru, B., Lin, H., & Sun, W. (2015) · Fuel · doi:10.1016/j.fuel.2015.02.045 · Cited by 218
Comparative study on chemical composition of various biomass species
Rabemanolontsoa, H., & Saka, S. (2013) · RSC Advances · doi:10.1039/c3ra22958k · Cited by 215
Zhou, H., Long, Y., Meng, A., Li, Q., & Zhang, Y. (2013) · Thermochimica Acta · doi:10.1016/j.tca.2013.04.040 · Cited by 201
Wu, Z., Wang, S., Zhao, J., Chen, L., & Meng, H. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.06.105 · Cited by 198
Wang, S., Ru, B., Lin, H., & Luo, Z. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.06.026 · Cited by 193
A comprehensive study on pyrolysis kinetics of microalgal biomass
Bach, Q.-V., & Chen, W.-H. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.10.077 · Cited by 170
Tian, B., Qiao, Y., Tian, Y., & Liu, Q. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.08.020 · Cited by 166
Self-citationXue, M., Xu, F., Jiang, Y., Zong, P., Wang, B., Li, J., Qiao, Y., & Tian, Y. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118713 · Cited by 165
Self-citationNiu, S., Zhou, Y., Yu, H., Lu, C., & Han, K. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.07.053 · Cited by 162
Impact of feedstock composition on pyrolysis of low-cost, protein- and lignin-rich biomass: A review
Cheng, F., Bayat, H., Jena, U., & Brewer, C. E. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.104780 · Cited by 159
Lam, S. S., Mahari, W. A. W., Cheng, C. K., Omar, R., Chong, C. T., & Chase, H. A. (2016) · Energy · doi:10.1016/j.energy.2016.09.076 · Cited by 154
Thermal behavior of waste tea pyrolysis by TG-FTIR analysis
Tian, L., Shen, B., Xu, H., Li, F., Wang, Y., & Singh, S. (2016) · Energy · doi:10.1016/j.energy.2016.03.022 · Cited by 144
Thermal deoxygenation and pyrolysis of oleic acid
Asomaning, J., Mussone, P. G., & Bressler, D. C. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.09.005 · Cited by 142
Qiao, Y., Wang, B., Zong, P., Tian, Y., Xu, F., Li, D., Li, F., & Tian, Y. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.111964 · Cited by 142
Self-citationChen, L., Yu, Z., Liang, J., Liao, Y., & Ma, X. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.10.010 · Cited by 140
Effect of the heating rate on the devolatilization of biomass residues
Biagini, E., Fantei, A., & Tognotti, L. (2008) · Thermochimica Acta · doi:10.1016/j.tca.2008.03.015 · Cited by 139
Debono, O., & Villot, A. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.06.002 · Cited by 139
Thermal Cracking Characteristics and Kinetics of Oil Sand Bitumen and Its SARA Fractions by TG–FTIR
Hao, J., Che, Y., Tian, Y., Li, D., Zhang, J., & Qiao, Y. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b02598 · Cited by 136
Self-citationAlgae characterization and multistep pyrolysis mechanism
Debiagi, P. E. A., Trinchera, M., Frassoldati, A., Faravelli, T., Vinu, R., & Ranzi, E. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.08.007 · Cited by 127
Zhan, H., Zhuang, X., Song, Y., Yin, X., & Wu, C. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.015 · Cited by 127
Pyrolytic Decarboxylation and Cracking of Stearic Acid
Maher, K., Kirkwood, K. M., Gray, M. R., & Bressler, D. C. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0714551 · Cited by 124
Fan, Y., Cai, Y., Li, X., Jiao, L., Xia, J., & Deng, X. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.01.075 · Cited by 122
Kinetic modeling of biomass components pyrolysis using a sequential and coupling method
Wang, S., Lin, H., Ru, B., Dai, G., Wang, X., Xiao, G., & Luo, Z. (2016) · Fuel · doi:10.1016/j.fuel.2016.08.037 · Cited by 121
Wei, X., Ma, X., Peng, X., Yao, Z., Yang, F., & Dai, M. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.08.031 · Cited by 119
Pyrolysis mechanism of microalgae Nannochloropsis sp. based on model compounds and their interaction
Wang, X., Tang, X., & Yang, X. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.02.058 · Cited by 115
A modified kinetic analysis method of cellulose pyrolysis based on TG–FTIR technique
Yang, X., Zhao, Y., Li, R., Wu, Y., & Yang, M. (2018) · Thermochimica Acta · doi:10.1016/j.tca.2018.05.008 · Cited by 115
Pyrolysis of blend (oil palm biomass and sawdust) biomass using TG-MS
Salema, A. A., Ting, R. M. W., & Shang, Y. K. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.12.014 · Cited by 115
Thermal synthesis and pyrolysis of a xylan
Ponder, G. R., & Richards, G. N. (1991) · Carbohydrate Research · doi:10.1016/0008-6215(91)84093-t · Cited by 110
Pyrolysis behavior and kinetics of the trapped small molecular phase in a lignite
Tian, B., Qiao, Y., Bai, L., Feng, W., Jiang, Y., & Tian, Y. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.02.077 · Cited by 110
Self-citationAssessments of pyrolysis kinetics and mechanisms of biomass residues using thermogravimetry
Gogoi, M., Konwar, K., Bhuyan, N., Borah, R. C., Kalita, A. C., Nath, H. P., & Saikia, N. (2018) · Bioresource Technology Reports · doi:10.1016/j.biteb.2018.08.016 · Cited by 105
Zhang, Z., Zhu, M., & Zhang, D. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.057 · Cited by 103
Influence of temperature and time on initial pyrolysis of cellulose and xylan
Usino, D. O., Supriyanto, S., Ylitervo, P., Pettersson, A., & Richards, T. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.104782 · Cited by 100
Xin, S., Yang, H., Chen, Y., Wang, X., & Chen, H. (2013) · Fuel · doi:10.1016/j.fuel.2013.05.061 · Cited by 98
Pyrolysis-gas chromatography–mass spectrometry of the 20 protein amino acids in the presence of TMAH
Gallois, N., Templier, J., & Derenne, S. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2007.02.010 · Cited by 97
Shen, D., Zhao, J., & Xiao, R. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.06.067 · Cited by 97
Chen, H., Namioka, T., & Yoshikawa, K. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.07.007 · Cited by 90
Karatzos, S. K., Edye, L. A., & Doherty, W. O. S. (2012) · Biotechnology for Biofuels · doi:10.1186/1754-6834-5-62 · Cited by 82
Model-based downdraft biomass gasifier operation and design for synthetic gas production
Yan, W., Shen, Y., You, S., Sim, S. H., Luo, Z., Tong, Y. W., & Wang, C. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.01.009 · Cited by 75
How biomass composition determines protein extractability
Sari, Y. W., Syafitri, U. D., Sanders, J. P. M., & Bruins, M. E. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.03.020 · Cited by 74
Li, J., Qiao, Y., Zong, P., Qin, S., Wang, C., & Tian, Y. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.02.097 · Cited by 64
Self-citationDu, H., Liu, D., Li, M., Wu, P., & Yang, Y. (2015) · Energy & Fuels · doi:10.1021/ef5024143 · Cited by 63
Li, F., Srivatsa, S. C., Batchelor, W. J., & Bhattacharya, S. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.01.005 · Cited by 58
Na, J., Park, Y., Kim, D. I., Oh, Y., Jeon, S. G., Kook, J. W., Shin, J. H., & Lee, S. H. (2015) · Renewable Energy · doi:10.1016/j.renene.2015.03.088 · Cited by 53
Sugumaran, V., Prakash, S., Ramu, E., Arora, A. K., Bansal, V., Kagdiyal, V., & Saxena, D. B. (2017) · Journal of Chromatography B · doi:10.1016/j.jchromb.2017.05.014 · Cited by 47
Martínez, M. G., Ohra‐aho, T., Tamminen, T., Perez, D. D. S., Campargue, M., & Dupont, C. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.02.011 · Cited by 43
Deng, C., Liaw, S. B., Gao, X., & Wu, H. (2020) · Fuel · doi:10.1016/j.fuel.2019.116991 · Cited by 32
New approach for the kinetic analysis of cellulose using EGA-MS
Kim, Y., Han, T. U., Hwang, B., Lee, Y., Watanabe, A., Teramae, N., Kim, S.-S., Park, Y., & Kim, S. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.02.004 · Cited by 28
Cited by
Li, C., Sun, Y., Dong, D., Gao, G., Zhang, S., Wang, Y., Xiang, J., Hu, S., Mortaza, G., & Hu, X. (2021) · Energy · doi:10.1016/j.energy.2021.120442 · Cited by 122
Wang, T.-P., Li, H., Yuan, J.-M., Li, W.-X., Li, K., Huang, Y.-B., Xiao, L.-P., & Lu, Q. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.113912 · Cited by 92
Wang, Q., Wang, B., Ma, Y., Zhang, X., Lyu, W., & Chen, M. (2022) · Environmental Pollution · doi:10.1016/j.envpol.2022.118902 · Cited by 53
Self-citation
Metadata
- Authors
- Zong, P., Jiang, Y., Tian, Y., Li, J., Yuan, M., Ji, Y., Chen, M., Li, D., & Qiao, Y.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 216
- Pages
- 112777
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W3024521084
- Cited by
- 412
- References
- 68
- FWCI
- 13.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.