CoChat

Progress in catalytic pyrolysis of municipal solid waste

Li, Qingyin, Faramarzi, Ali, Zhang, Shu, Wang, Yi, Hu, Xun, Gholizadeh, Mortaza · 2020 · Energy Conversion and Management
Cited by 149

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Abstract

Abstract Municipal solid wastes occupy lands and create environmental issues, which has stimulated interest from governments to research community for converting them into useful products such as fuels, chemicals and electricity through the thermochemical methods including pyrolysis, gasification, etc. Pyrolysis converts municipal solid wastes into fuels in gaseous, liquid and solid form. Owing to the unsatisfactory quality of fuels from non-catalytic pyrolysis, catalytic pyrolysis was proposed to improve especially the properties of liquid fuel in the presence of catalyst. Catalyst is thus an essential parameter in catalytic pyrolysis, as the specifications of catalysts could show profound influence on composition of the liquid fuel. Specifically, the formulation of catalyst, the exposed surface species, the acidic sites, the porous structures, etc all affect catalytic performances in pyrolysis of municipal solid waste. Up to now, there have been a number of catalysts developed for catalytic pyrolysis of the mixture of municipal solid waste. These catalysts, depending on their specifications, show the distinct catalytic performances in catalytic pyrolysis of municipal solid waste and also varied lifetime span in the pyrolysis, etc. The feasibility of the catalysts in especially the application in industrial scale needs further evaluation and verification. This review dedicates to the progress of the development of the catalysts for catalytic pyrolysis of mixed municipal solid waste. The advantages and disadvantages of each types of catalysts are discussed and compared. Suggestions were given for the future stages of developments of catalyst for the small to large-scale operation of catalytic pyrolysis of municipal solid waste. The results of techno-economic review showed that catalyst could reduce the amount of emission and produce more valuable products. However, the cost of regeneration might increase the cost of operation significantly.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.enconman.2020.113525

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 6 references

Research works printed but not linked: 149

  1. Kumar, 2017, A review on technological options of waste to energy for effective management of municipal solid waste, Waste Manage, 69, 407, 10.1016/j.wasman.2017.08.046 · DOI · Paper page
  2. Xu, 2016, Characterization of adhesive penetration in wood bond by means of scanning thermal microscopy (SThM), Holzforschung, 70, 323, 10.1515/hf-2014-0360 · doi:10.1515/hf-2014-0360
  3. Huang, 2019, Effect of torrefaction on steam gasification of starchy food waste, Fuel, 253, 1556, 10.1016/j.fuel.2019.05.142 · DOI
  4. Xu, 2020, Hydrothermal carbonization of sewage sludge: Effect of aqueous phase recycling, Chem Eng J, 387, 10.1016/j.cej.2019.123410 · DOI · Paper page
  5. Ibanez-Fores, 2018, Influence of implementing selective collection on municipal waste management systems in developing countries: A Brazilian case study, Resour Conserv Recycl, 134, 100, 10.1016/j.resconrec.2017.12.027 · DOI
  6. Wang, 2018, Stabilization of heavy metals in fly ashes from municipal solid waste incineration via wet milling, Fuel, 216, 153, 10.1016/j.fuel.2017.11.045 · DOI
  7. Bosmans, 2013, The crucial role of Waste-to-Energy technologies in enhanced landfill mining: a technology review, J Clean Prod, 55, 10, 10.1016/j.jclepro.2012.05.032 · DOI
  8. Cheng, 2019, Effects of Ca and Na acetates on nitrogen transformation during sewage sludge pyrolysis, Proc Combust Inst, 37, 2715, 10.1016/j.proci.2018.08.018 · DOI
  9. Damgaard, 2010, Life-cycle-assessment of the historical development of air pollution control and energy recovery in waste incineration, Waste Manage, 30, 1244, 10.1016/j.wasman.2010.03.025 · DOI · Paper page
  10. Chen, 2014, Pyrolysis technologies for municipal solid waste: A review, Waste Manage, 34, 2466, 10.1016/j.wasman.2014.08.004 · DOI · Paper page
  11. Perrot, 2018, Municipal waste management strategy review and waste-to-energy potentials in new zealand, Sustainability, 10, 10.3390/su10093114 · DOI
  12. Vaclavik, 2016, Leachate from municipal waste landfill and its natural degradationa case study of Zubi, Zlin Region, Int J Env Res Public Health, 13, 10.3390/ijerph13090873 · doi:10.3390/ijerph13090873
  13. Adamcova, 2017, Environmental assessment of the effects of a municipal landfill on the content and distribution of heavy metals in Tanacetum vulgare L, Chemosphere, 185, 1011, 10.1016/j.chemosphere.2017.07.060 · DOI
  14. Piekutin, 2019, Monitoring of groundwater in the area of a reclaimed municipal waste landfill, J Ecol Eng, 20, 262, 10.12911/22998993/111718 · doi:10.12911/22998993/111718
  15. Grygorczuk-Petersons, 2016, Effect of sealed municipal waste landfill on the quality of underground water, J Ecol Eng, 17, 123, 10.12911/22998993/61200 · doi:10.12911/22998993/61200
  16. Samadder, 2017, Analysis of the contaminants released from municipal solid waste landfill site: A case study, Sci Total Environ, 580, 593, 10.1016/j.scitotenv.2016.12.003 · DOI · Paper page
  17. Ye, 2019, Emerging sustainable technologies for remediation of soils and groundwater in a municipal solid waste landfill site – A review, Chemosphere, 227, 681, 10.1016/j.chemosphere.2019.04.053 · DOI
  18. Nigro, 2017, Application of boron and tritium isotopes for tracing landfill contamination in groundwater, J Geochem Explor, 172, 101, 10.1016/j.gexplo.2016.10.011 · DOI
  19. Vongdala, 2019, Heavy metal accumulation in water, soil, and plants of municipal solid waste landfill in vientiane, Laos Int J Env Res Public Health, 16
  20. Preziosi, 2019, Disentangling natural and anthropogenic impacts on groundwater by hydrogeochemical, isotopic and microbiological data: Hints from a municipal solid waste landfill, Waste Manage, 84, 245, 10.1016/j.wasman.2018.12.005 · DOI
  21. Peng, 2016, Chlorophenols in municipal solid waste incineration: A review, Chem Eng J, 292, 398, 10.1016/j.cej.2016.01.102 · doi:10.1016/j.cej.2016.01.102
  22. He, 2019, Assessment of waste incineration power with considerations of subsidies and emissions in China, Energy Policy, 126, 190, 10.1016/j.enpol.2018.11.025 · DOI
  23. Istrate, 2019, Long-term opportunities for electricity production through municipal solid waste incineration when internalising external costs, J Clean Prod, 215, 870, 10.1016/j.jclepro.2019.01.137 · DOI
  24. Rodella, 2017, Waste silica sources as heavy metal stabilizers for municipal solid waste incineration fly ash, Arabian J Chem, 10, S3676, 10.1016/j.arabjc.2014.04.006 · DOI
  25. Lu, 2017, Status and perspectives of municipal solid waste incineration in China: A comparison with developed regions, Waste Manage, 69, 170, 10.1016/j.wasman.2017.04.014 · DOI · Paper page
  26. Dong, 2015, Partitioning of heavy metals in municipal solid waste pyrolysis, gasification, and incineration, Energy Fuels, 29, 7516, 10.1021/acs.energyfuels.5b01918 · DOI
  27. Hsu, 2016, PAH emissions from coal combustion and waste incineration, J Hazard Mater, 318, 32, 10.1016/j.jhazmat.2016.06.038 · DOI
  28. Tang, 2016, Leaching optimization of municipal solid waste incineration ash for resource recovery: A case study of Cu, Zn, Pb and Cd Waste Manage, 48, 315, 10.1016/j.wasman.2015.10.003 · DOI · Paper page
  29. Sabbas, 2003, Management of municipal solid waste incineration residues, Waste Manage, 23, 61, 10.1016/S0956-053X(02)00161-7 · DOI · Paper page
  30. Galfalk, 2018, Remote sensing of methane and nitrous oxide fluxes from waste incineration, Waste Manage, 75, 319, 10.1016/j.wasman.2018.01.031 · doi:10.1016/j.wasman.2018.01.031
  31. Funari, 2017, Metal removal from Municipal Solid Waste Incineration fly ash: A comparison between chemical leaching and bioleaching, Waste Manage, 60, 397, 10.1016/j.wasman.2016.07.025 · DOI · Paper page
  32. Weibel, 2017, Chemical associations and mobilization of heavy metals in fly ash from municipal solid waste incineration, Waste Manage, 62, 147, 10.1016/j.wasman.2016.12.004 · DOI
  33. Luo, 2010, Influence of particle size on pyrolysis and gasification performance of municipal solid waste in a fixed bed reactor, Bioresour Technol, 101, 6517, 10.1016/j.biortech.2010.03.060 · DOI · Paper page
  34. Sanlisoy, 2017, A review on plasma gasification for solid waste disposal, Int J Hydrog Energy, 42, 1361, 10.1016/j.ijhydene.2016.06.008 · DOI · Paper page
  35. Ramos, 2018, Co-gasification and recent developments on waste-to-energy conversion: A review, Renew Sust Energ Rev, 81, 380, 10.1016/j.rser.2017.07.025 · DOI · Paper page
  36. Couto, 2016, Municipal solid waste gasification in semi-industrial conditions using air-CO2 mixtures, Energy, 104, 42, 10.1016/j.energy.2016.03.088 · DOI
  37. Burra, 2018, Synergistic effects in steam gasification of combined biomass and plastic waste mixtures, Appl Energy, 211, 230, 10.1016/j.apenergy.2017.10.130 · DOI · Paper page
  38. Irfan, 2019, Production of hydrogen enriched syngas from municipal solid waste gasification with waste marble powder as a catalyst, Int J Hydrog Energy, 44, 8051, 10.1016/j.ijhydene.2019.02.048 · DOI
  39. Czajczyńska, 2017, Potential of pyrolysis processes in the waste management sector, Therm Sci Eng Prog, 3, 171, 10.1016/j.tsep.2017.06.003 · DOI · Paper page
  40. Katakojwala, 2020, Hydrothermal liquefaction of biogenic municipal solid waste under reduced H 2 atmosphere in biorefinery format, Bioresour Technol, 310, 10.1016/j.biortech.2020.123369 · DOI
  41. Hu, 2019, Biomass pyrolysis: A review of the process development and challenges from initial researches up to the commercialisation stage, J Energy Chem, 39, 109, 10.1016/j.jechem.2019.01.024 · DOI · Paper page
  42. Al-Salem, 2017, A review on thermal and catalytic pyrolysis of plastic solid waste (PSW), J Environ Manage, 197, 177, 10.1016/j.jenvman.2017.03.084 · DOI · Paper page
  43. Buah, 2007, Characterization of products from the pyrolysis of municipal solid waste, Process Saf Environ Prot, 85, 450, 10.1205/psep07024 · DOI · Paper page
  44. Gholizadeh, 2019, Progress of using biochar as a catalyst in thermal conversion of biomass, Rev Chem Eng, 35
  45. He, 2010, Syngas production from pyrolysis of municipal solid waste (MSW) with dolomite as downstream catalysts, J Anal Appl Pyrolysis, 87, 181, 10.1016/j.jaap.2009.11.005 · DOI · Paper page
  46. Li, 1999, Experimental studies on municipal solid waste pyrolysis in a laboratory-scale rotary kiln, Energy, 24, 209, 10.1016/S0360-5442(98)00095-4 · DOI
  47. Rehrah, 2016, Physico-chemical characterization of biochars from solid municipal waste for use in soil amendment, J Anal Appl Pyrolysis, 118, 42, 10.1016/j.jaap.2015.12.022 · DOI
  48. Islam, 2005, Pyrolytic oil from fixed bed pyrolysis of municipal solid waste and its characterization, Renew Energy, 30, 413, 10.1016/j.renene.2004.05.002 · DOI
  49. Luo, 2010, Effect of particle size on pyrolysis of single-component municipal solid waste in fixed bed reactor, Int J Hydrog Energy, 35, 93, 10.1016/j.ijhydene.2009.10.048 · DOI · Paper page
  50. Tursunov, 2014, A comparison of catalysts zeolite and calcined dolomite for gas production from pyrolysis of municipal solid waste (MSW), Ecol Eng, 69, 237, 10.1016/j.ecoleng.2014.04.004 · DOI
  51. Ates, 2013, Comparision of real waste (MSW and MPW) pyrolysis in batch reactor over different catalysts. Part I: Product yields, gas and pyrolysis oil properties, Bioresour Technol, 133, 443, 10.1016/j.biortech.2013.01.112 · DOI · Paper page
  52. Veses, 2020, A combined two-stage process of pyrolysis and catalytic cracking of municipal solid waste for the production of syngas and solid refuse-derived fuels, Waste Manage, 101, 171, 10.1016/j.wasman.2019.10.009 · DOI
  53. Tokmurzin, 2020, Characterization of solid char produced from pyrolysis of the organic fraction of municipal solid waste, high volatile coal and their blends, Energy, 191, 10.1016/j.energy.2019.116562 · doi:10.1016/j.energy.2019.116562
  54. Tursunov, 2020, Characterization of tar generated from the mixture of municipal solid waste and coal pyrolysis at 800 degrees C, Energy Rep, 6, 147, 10.1016/j.egyr.2019.08.033 · DOI
  55. Bondrea, 2019, Bio-gaseous fuels from agricultural waste pyrolysis (Part I), MATEC Web Conf, 290
  56. Bondrea, 2019, Bio-gaseous fuels from agricultural waste pyrolysis (Part II), MATEC Web Conf, 290
  57. Luo, 2017, The production of hydrogen-rich gas by catalytic pyrolysis of biomass using waste heat from blast-furnace slag, Renew Energy, 101, 1030, 10.1016/j.renene.2016.09.072 · DOI
  58. Czajczynska, 2017, Use of pyrolytic gas from waste tire as a fuel: A review, Energy, 134, 1121, 10.1016/j.energy.2017.05.042 · DOI · Paper page
  59. Honus, 2016, Replacing conventional fuels in USA, Europe, and UK with plastic pyrolysis gases-Part I: Experiments and graphical interchangeability methods, Energy Convers Manag, 126, 1118, 10.1016/j.enconman.2016.08.055 · DOI
  60. Gopu, 2018, Valorizing municipal solid waste: Waste to energy and activated carbons for water treatment via pyrolysis, J Anal Appl Pyrolysis, 133, 48, 10.1016/j.jaap.2018.05.002 · DOI
  61. Heo, 2010, Bio-oil production from fast pyrolysis of waste furniture sawdust in a fluidized bed, Bioresour Technol, 101, S91, 10.1016/j.biortech.2009.06.003 · DOI · Paper page
  62. Onal, 2011, Steam pyrolysis of an industrial waste for bio-oil production, Fuel Process Technol, 92, 879, 10.1016/j.fuproc.2010.12.006 · DOI
  63. Lam, 2012, Microwave-heated pyrolysis of waste automotive engine oil: Influence of operation parameters on the yield, composition, and fuel properties of pyrolysis oil, Fuel, 92, 327, 10.1016/j.fuel.2011.07.027 · DOI · Paper page
  64. Yang, 2016, Fast co-pyrolysis of low density polyethylene and biomass residue for oil production, Energy Convers Manag, 120, 422, 10.1016/j.enconman.2016.05.008 · DOI · Paper page
  65. Han, 2019, Hydrotreatment of pyrolysis bio-oil: A review, Fuel Process Technol, 195, 10.1016/j.fuproc.2019.106140 · DOI · Paper page
  66. Chaiwat, 2013, Upgrading of bio-oil into advanced biofuels and chemicals. Part II. Importance of holdup of heavy species during the hydrotreatment of bio-oil in a continuous packed-bed catalytic reactor, Fuel, 112, 302, 10.1016/j.fuel.2013.05.004 · DOI
  67. Gholizadeh, 2016, Effects of temperature on the hydrotreatment behaviour of pyrolysis bio-oil and coke formation in a continuous hydrotreatment reactor, Fuel Process Technol, 148, 175, 10.1016/j.fuproc.2016.03.002 · DOI
  68. Miandad, 2019, Catalytic pyrolysis of plastic waste: Moving toward pyrolysis based biorefineries, Front Energy Res, 7, 10.3389/fenrg.2019.00027 · DOI · Paper page
  69. Li, 2020, Different reaction behaviours of light or heavy density polyethylene during the pyrolysis with biochar as the catalyst, J Hazard Mater, 399, 123075-, 10.1016/j.jhazmat.2020.123075 · DOI · Paper page
  70. Zhang, 2019, Catalytic pyrolysis of poplar wood over transition metal oxides: Correlation of catalytic behaviors with physiochemical properties of the oxides, Biomass Bioenergy, 124, 125, 10.1016/j.biombioe.2019.03.017 · DOI · Paper page
  71. Li, 2011, Influence of temperature on pyrolysis of recycled organic matter from municipal solid waste using an activated olivine fluidized bed, Fuel Process Technol, 92, 1776, 10.1016/j.fuproc.2011.04.026 · DOI
  72. Chen, 2020, Catalytic performance and debromination of Fe-Ni bimetallic MCM-41 catalyst for the two-stage pyrolysis of waste computer casing plastic, Chemosphere, 248, 10.1016/j.chemosphere.2020.125964 · DOI
  73. Hayashi, 2010, A new pyrolysis of metal hydroxide-mixed waste biomass with effective chlorine removal and efficient heat recovery, Ind Eng Chem Res, 49, 11825, 10.1021/ie1008234 · doi:10.1021/ie1008234
  74. Sipra, 2018, Municipal solid waste (MSW) pyrolysis for bio-fuel production: A review of effects of MSW components and catalysts, Fuel Process Technol, 175, 131, 10.1016/j.fuproc.2018.02.012 · DOI · Paper page
  75. Putun, 2006, Fixed-bed catalytic pyrolysis of cotton-seed cake: Effects of pyrolysis temperature, natural zeolite content and sweeping gas flow rate, Bioresour Technol, 97, 701, 10.1016/j.biortech.2005.04.005 · DOI
  76. Jae, 2011, Investigation into the shape selectivity of zeolite catalysts for biomass conversion, J Catal, 279, 257, 10.1016/j.jcat.2011.01.019 · DOI · Paper page
  77. Lee, 2016, Catalytic pyrolysis of lignin using a two-stage fixed bed reactor comprised of in-situ natural zeolite and ex-situ HZSM-5, J Anal Appl Pyrolysis, 122, 282, 10.1016/j.jaap.2016.09.015 · DOI
  78. Akubo, 2019, Aromatic fuel oils produced from the pyrolysis-catalysis of polyethylene plastic with metal-impregnated zeolite catalysts, J Energy Inst, 92, 195, 10.1016/j.joei.2017.10.009 · DOI · Paper page
  79. Marcilla, 2009, Thermal and catalytic pyrolysis of polyethylene over HZSM5 and HUSY zeolites in a batch reactor under dynamic conditions, Appl Catal B: Environ, 86, 78, 10.1016/j.apcatb.2008.07.026 · DOI · Paper page
  80. Qu, 2006, Pyrolysis of waste tire on ZSM-5 zeolite with enhanced catalytic activities, Polym Degrad Stabil, 91, 2389, 10.1016/j.polymdegradstab.2006.03.014 · DOI
  81. Arabiourrutia, 2008, HZSM-5 and HY zeolite catalyst performance in the pyrolysis of tires in a conical spouted bed reactor, Ind Eng Chem Res, 47, 7600, 10.1021/ie800376d · DOI · Paper page
  82. Ding, 2017, Effects of alkali-treated hierarchical HZSM-5 zeolites on the production of aromatic hydrocarbons from catalytic fast pyrolysis of waste cardboard, J Anal Appl Pyrolysis, 125, 153, 10.1016/j.jaap.2017.04.006 · DOI
  83. Miskolczi, 2013, Comparison of real waste (MSW and MPW) pyrolysis in batch reactor over different catalysts. Part II: Contaminants, char and pyrolysis oil properties, Bioresour Technol, 144, 370, 10.1016/j.biortech.2013.06.109 · DOI
  84. Gandidi, 2018, Thermal – Catalytic cracking of real MSW into Bio-Crude Oil, J Energy Inst, 91, 304, 10.1016/j.joei.2016.11.005 · DOI
  85. Nguyen, 2016, Catalytic hydro-pyrolysis of lignocellulosic biomass over dual Na2CO3/Al2O3 and Pt/Al2O3 catalysts using n-butane at ambient pressure, Chem Eng J, 299, 415, 10.1016/j.cej.2016.04.104 · DOI
  86. Karnjanakom, 2015, A green method to increase yield and quality of bio-oil: ultrasonic pretreatment of biomass and catalytic upgrading of bio-oil over metal (Cu, Fe and/or Zn)/γ-Al2O3, RSC Adv, 5, 83494, 10.1039/C5RA14609G · DOI
  87. Karnjanakom, 2016, Selective production of aromatic hydrocarbons from catalytic pyrolysis of biomass over Cu or Fe loaded mesoporous rod-like alumina, Rsc Adv, 6, 50618, 10.1039/C6RA09431G · DOI
  88. Mante, 2015, Catalytic conversion of biomass pyrolysis vapors into hydrocarbon fuel precursors, Green Chem, 17, 2362, 10.1039/C4GC02238F · DOI
  89. Grams, 2015, Catalytic performance of a Ni catalyst supported on CeO2, ZrO2 and CeO2-ZrO2 in the upgrading of cellulose fast pyrolysis vapors, C R Chim, 18, 1223, 10.1016/j.crci.2015.03.004 · DOI
  90. Grams, 2017, Development of heterogeneous catalysts for thermo-chemical conversion of lignocellulosic biomass, Energies, 10, 10.3390/en10040545 · DOI
  91. Liu, 2014, The catalytic pyrolysis of food waste by microwave heating, Bioresour Technol, 166, 45, 10.1016/j.biortech.2014.05.020 · DOI
  92. Terakado, 2013, Bromine fixation by metal oxide in pyrolysis of printed circuit board containing brominated flame retardant, J Anal Appl Pyrolysis, 103, 216, 10.1016/j.jaap.2012.10.022 · DOI
  93. Huang, 2013, Catalytic and atmospheric effects on microwave pyrolysis of corn stover, Bioresour Technol, 131, 274, 10.1016/j.biortech.2012.12.177 · DOI
  94. Loy, 2018, The effect of industrial waste coal bottom ash as catalyst in catalytic pyrolysis of rice husk for syngas production, Energy Convers Manag, 165, 541, 10.1016/j.enconman.2018.03.063 · DOI
  95. Yao, 2017, Co-production of hydrogen and carbon nanotubes from catalytic pyrolysis of waste plastics on Ni-Fe bimetallic catalyst, Energy Convers Manag, 148, 692, 10.1016/j.enconman.2017.06.012 · DOI · Paper page
  96. Tian, 2016, One-pot synthesis of a carbon supported bimetallic Cu-Ag NPs catalyst for robust catalytic hydroxylation of benzene to phenol by fast pyrolysis of biomass waste, Green Chem, 18, 5643, 10.1039/C6GC01231K · DOI · Paper page
  97. Ren, 2018, Catalytic upgrading of pyrolysis vapors from lignite over mono/bimetal-loaded mesoporous HZSM-5, Fuel, 218, 33, 10.1016/j.fuel.2018.01.017 · DOI
  98. Li, 2016, Hydrocracking of the crude oil from thermal pyrolysis of municipal wastes over bi-functional Mo-Ni catalyst, Catal Today, 271, 172, 10.1016/j.cattod.2015.08.034 · DOI
  99. Aboul-Enein, 2018, Production of nanostructured carbon materials using Fe-Mo/MgO catalysts via mild catalytic pyrolysis of polyethylene waste, Chem Eng J, 354, 802, 10.1016/j.cej.2018.08.046 · DOI · Paper page
  100. Yao, 2018, Co-production of hydrogen and carbon nanotubes from real-world waste plastics: Influence of catalyst composition and operational parameters, Appl Catal B: Environ, 221, 584, 10.1016/j.apcatb.2017.09.035 · DOI · Paper page
  101. Wang, 2016, Low-Temperature catalytic graphitization of phenolic resin using a Co-Ni bimetallic catalyst, Interceram-Int Ceram Rev, 65, 24, 10.1007/BF03401183 · doi:10.1007/bf03401183
  102. Aboul-Enein, 2018, A novel design for mass production of multi-walled carbon nanotubes using Co-Mo/MgO catalyst via pyrolysis of polypropylene waste: effect of operating conditions, Fuller Nanotub Car N, 26, 591, 10.1080/1536383X.2018.1476344 · DOI
  103. Aboul-Enein, 2017, Simple method for synthesis of carbon nanotubes over Ni-Mo/Al2O3 catalyst via pyrolysis of polyethylene waste using a two-stage process, Fuller Nanotub Car N, 25, 211, 10.1080/1536383X.2016.1277422 · DOI
  104. Kyaw, 2015, Effect of various catalysts on fuel oil pyrolysis process of mixed plastic wastes, Int J Adv, 8, 794
  105. Elbaba, 2013, High yield hydrogen from the pyrolysis-catalytic gasification of waste tyres with a nickel/dolomite catalyst, Fuel, 106, 528, 10.1016/j.fuel.2012.12.067 · DOI
  106. Choi, 2016, Scrap tire pyrolysis using a new type two-stage pyrolyzer: Effects of dolomite and olivine on producing a low-sulfur pyrolysis oil, Energy, 114, 457, 10.1016/j.energy.2016.08.020 · DOI
  107. Kim, 2018, Stabilization of bio-oil over a low cost dolomite catalyst, Korean J Chem Eng, 35, 922, 10.1007/s11814-018-0002-3 · DOI
  108. Haydary, 2013, Pyrolysis of aseptic packages (tetrapak) in a laboratory screw type reactor and secondary thermal/catalytic tar decomposition, Waste Manag, 33, 1136, 10.1016/j.wasman.2013.01.031 · DOI
  109. Fekhar, 2020, Thermo-catalytic co-pyrolysis of waste plastic and paper in batch and tubular reactors for in-situ product improvement, J Environ Manage, 269, 10.1016/j.jenvman.2020.110741 · DOI
  110. Dorado, 2015, Origin of carbon in aromatic and olefin products derived from HZSM-5 catalyzed co-pyrolysis of cellulose and plastics via isotopic labeling, Appl Catal B: Environ, 162, 338, 10.1016/j.apcatb.2014.07.006 · DOI · Paper page
  111. Kim, 2017, Catalytic co-pyrolysis of torrefied yellow poplar and high-density polyethylene using microporous HZSM-5 and mesoporous Al-MCM-41 catalysts, Energy Convers Manag, 149, 966, 10.1016/j.enconman.2017.04.033 · DOI
  112. Lee, 2016, Production of aromatic hydrocarbons via catalytic co-pyrolysis of torrefied cellulose and polypropylene, Energy Convers Manag, 129, 81, 10.1016/j.enconman.2016.10.001 · DOI
  113. Li, 2013, Improving the aromatic production in catalytic fast pyrolysis of cellulose by co-feeding low-density polyethylene, Appl Catal A Gen, 455, 114, 10.1016/j.apcata.2013.01.038 · DOI · Paper page
  114. Li, 2015, Maximizing carbon efficiency of petrochemical production from catalytic co-pyrolysis of biomass and plastics using gallium-containing MFI zeolites, Appl Catal B: Environ, 172, 154, 10.1016/j.apcatb.2015.02.015 · DOI
  115. Xue, 2016, Catalytic co-pyrolysis of biomass and polyethylene in a tandem micropyrolyzer, Fuel, 166, 227, 10.1016/j.fuel.2015.10.125 · DOI · Paper page
  116. Fang, 2018, Analysis of catalytic pyrolysis of municipal solid waste and paper sludge using TG-FTIR, Py-GC/MS and DAEM (distributed activation energy model), Energy, 143, 517, 10.1016/j.energy.2017.11.038 · DOI
  117. Song, 2020, Pyrolysis of municipal solid waste with iron-based additives: A study on the kinetic, product distribution and catalytic mechanisms, J Clean Prod, 258, 10.1016/j.jclepro.2020.120682 · DOI · Paper page
  118. Chen, 2018, Co-pyrolysis of chlorella vulgaris and kitchen waste with different additives using TG-FTIR and Py-GC/MS, Energy Convers Manag, 177, 582, 10.1016/j.enconman.2018.10.010 · DOI
  119. Deng, 2020, Catalytic co-pyrolysis behaviors and kinetics of camellia shell and take-out solid waste using pyrolyzer-gas chromatography/mass spectrometry and thermogravimetric analyzer, Bioresour Technol, 297, 10.1016/j.biortech.2019.122419 · DOI
  120. Mishra, 2019, Conversion of waste biomass and waste nitrile gloves into renewable fuel, Waste Manage, 89, 397, 10.1016/j.wasman.2019.04.032 · DOI
  121. Sanahujaparejo, 2018, Catalytic co-pyrolysis of grape seeds and waste tyres for the production of drop-in biofuels, Energy Convers Manag, 171, 1202, 10.1016/j.enconman.2018.06.053 · DOI
  122. Wang, 2019, Catalytic fast co-pyrolysis of bamboo sawdust and waste plastics for enhanced aromatic hydrocarbons production using synthesized CeO2/γ-Al2O3 and HZSM-5, Energy Convers Manag, 196, 759, 10.1016/j.enconman.2019.06.009 · DOI
  123. Al-asadi, 2020, High temperature pyrolysis of municipal plastic waste using Me/Ni/ZSM-5 catalysts: The effect of metal/nickel ratio, Energies, 13, 10.3390/en13051284 · DOI
  124. Tiikma, 2007, Coprocessing of heavy shale oil with polyethylene waste, J Anal Appl Pyrolysis, 79, 191, 10.1016/j.jaap.2006.12.029 · doi:10.1016/j.jaap.2006.12.029
  125. Ding, 2016, Pyrolysis of municipal solid waste in a fluidized bed for producing valuable pyrolytic oils, Clean Technol Envir, 18, 1111, 10.1007/s10098-016-1102-6 · DOI
  126. Omol, 2020, Production of fuel oil from municipal plastic wastes using thermal and catalytic pyrolysis, Int J Energ Res, 1
  127. Iqbal, 2019, Catalytic fast pyrolysis of wheat stalk with transition metal nitrides to upgrade the pyrolytic products, J Biobased Mater Bioenergy, 13, 870, 10.1166/jbmb.2019.1919 · doi:10.1166/jbmb.2019.1919
  128. Ji, 2006, Study on the pyrolysis of polyethylene in the presence of iron and copper chlorides, Chemosphere, 65, 1120, 10.1016/j.chemosphere.2006.04.029 · DOI
  129. Liu, 2017, Catalytic effect of iron and nickel on gas formation from fast biomass pyrolysis in a microfluidized bed reactor: a kinetic study, Energy Fuels, 31, 12278, 10.1021/acs.energyfuels.7b02214 · DOI
  130. Sanahuja-Parejo, 2019, Ca-based catalysts for the production of high-quality bio-oils from the catalytic co-pyrolysis of grape seeds and waste tyres, Catalysts, 9, 992, 10.3390/catal9120992 · DOI
  131. Sanna, 2012, Bio-oil deoxygenation by catalytic pyrolysis: new catalysts for the conversion of biomass into densified and deoxygenated bio-oil, Chem Sus Chem, 5, 1944, 10.1002/cssc.201200245 · DOI
  132. Rehan, 2017, Effect of zeolite catalysts on pyrolysis liquid oil, Int Biodeterior Biodegr, 119, 162, 10.1016/j.ibiod.2016.11.015 · DOI · Paper page
  133. Miandad, 2017, Plastic waste to liquid oil through catalytic pyrolysis using natural and synthetic zeolite catalysts, Waste Manage, 69, 66, 10.1016/j.wasman.2017.08.032 · DOI · Paper page
  134. Ojha, 2015, Fast co-pyrolysis of cellulose and polypropylene using Py-GC/MS and Py-FT-IR, RSC Adv, 5, 66861, 10.1039/C5RA10820A · DOI · Paper page
  135. Mullen, 2018, Catalytic co-pyrolysis of switchgrass and polyethylene over HZSM-5: catalyst deactivation and coke formation, J Anal Appl Pyrolysis, 129, 195, 10.1016/j.jaap.2017.11.012 · DOI
  136. Wang, 2020, Production of High-Value Chemicals by Biomass Pyrolysis with Metal Oxides and Zeolites, Waste Biomass Valori, 1
  137. Huo, 2020, Jet fuel and hydrogen produced from waste plastics catalytic pyrolysis with activated carbon and MgO, Sci Total Environ, 138411
  138. Aguado, 2014, Principal component analysis for kinetic scheme proposal in the thermal and catalytic pyrolysis of waste tyres, Chem Eng Sci, 106, 9, 10.1016/j.ces.2013.11.024 · DOI
  139. Hu, 2020, Coke Formation during Thermal Treatment of Bio-oil, Energy Fuels, 10.1021/acs.energyfuels.0c01323 · DOI · Paper page
  140. López, 2011, Deactivation and regeneration of ZSM-5 zeolite in catalytic pyrolysis of plastic wastes, Waste Manage, 31, 1852, 10.1016/j.wasman.2011.04.004 · DOI · Paper page
  141. Lin, 1997, Deactivation of US-Y zeolite by coke formation during the catalytic pyrolysis of high density polyethylene, Thermochim Acta, 294, 45, 10.1016/S0040-6031(96)03141-3 · doi:10.1016/s0040-6031(96)03141-3
  142. Wang, 2016, Modification and regeneration of HZSM-5 catalyst in microwave assisted catalytic fast pyrolysis of mushroom waste, Energy Convers Manag, 123, 29, 10.1016/j.enconman.2016.06.024 · DOI
  143. Zeaiter, 2014, A process study on the pyrolysis of waste polyethylene, Fuel, 133, 276, 10.1016/j.fuel.2014.05.028 · DOI
  144. Zhang, 2013, Co-catalytic pyrolysis of biomass and waste triglyceride seed oil in a novel fluidized bed reactor to produce olefins and aromatics integrated with self-heating and catalyst regeneration processes, RSC Adv, 3, 5769, 10.1039/c3ra40694f · DOI · Paper page
  145. Roy, 2019, Life Cycle Assessment (LCA) in municipal waste management decision making. plastics to, Energy, 377
  146. van Schalkwyk, 2020, Techno-economic and environmental analysis of bio-oil production from forest residues via non-catalytic and catalytic pyrolysis processes, Energy Convers Manag, 213, 10.1016/j.enconman.2020.112815 · DOI
  147. Heidari, 2020, Synthesis, characterization and life cycle assessment of carbon nanospheres from waste tires pyrolysis over ferrocene catalyst, J Environ Chem Eng, 8, 10.1016/j.jece.2020.103669 · DOI
  148. Iribarren, 2012, Preliminary assessment of plastic waste valorization via sequential pyrolysis and catalytic reforming, J Mater Cycles Waste Manag, 14, 301, 10.1007/s10163-012-0069-6 · DOI
  149. Shemfe, 2017, Techno-economic analysis of biofuel production via bio-oil zeolite upgrading: An evaluation of two catalyst regeneration systems, Biomass Bioenergy, 98, 182, 10.1016/j.biombioe.2017.01.020 · DOI

Cited by

See all 149

Metadata

Authors
Li, Q., Faramarzi, A., Zhang, S., Wang, Y., Hu, X., & Gholizadeh, M.
Venue
Energy Conversion and Management
Publisher
Elsevier BV
Published
2020-12
Volume
226
Pages
113525
ISSN
0196-8904 (ISSN-L)
OpenAlex
W3094195031
Cited by
149
References
6
FWCI
5.97
Type
journal article
Language
en
Open access
closed
Licence
  • www.elsevier.com/tdm/userlicense/1.0/ (tdm)
  • www.elsevier.com/legal/tdmrep-license (tdm)
Funders
National Natural Science Foundation of China (51876080)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Progress in catalytic pyrolysis of municipal solid waste. https://app.cochat.ai/papers/10.1016/j.enconman.2020.113525
The paper
Li, Q., Faramarzi, A., Zhang, S., Wang, Y., Hu, X., & Gholizadeh, M. (2020). Progress in catalytic pyrolysis of municipal solid waste. Energy Conversion and Management. https://doi.org/10.1016/j.enconman.2020.113525

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.