Dual electromagnetic energy harvesting technology for sustainable transportation systems
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Abstract Safety and energy resources are two important necessities of a sustainable transportation. Energy harvesting from roadways has a potential to impact both requirements. In this study, the Hybrid electromagnetic energy harvesting prototype is introduced. The prototype consists of two mechanisms, linear generator and rack-pinion to generate the electrical power. The experimental tests and analytical models were conducted to examine the performance of the prototype. The prototype was designed to perform as a speed bump. In the experimental tests, the traffic conditions were simulated to provide better insight of the prototype’s performance in real condition. The root mean square of the power outputs was measured, which was 1.2 W and 80 mW for the rack-pinion and linear generatormechanisms, respectively. According to the small scale of the prototype in comparison with real size, the results showed a promising technology to generate substantial electrical power in the field. The equivalent stiffness of the prototype is measured by experimental test which is 140,657 N/m. The analytical and experimental results show an agreement in influential factors for generating power; magnetic flux and relative movement for linear generator mechanism and vertical velocity and gearbox ratio effects for the Rack-pinion mechanism. In addition, the feasibility study showed that the prototype was applicable technology in roadways. The ease of installation, limited effects of the prototype on roadway performance and maintenance procedure make it an inevitable candidate for energy harvesting in roadways. However, it must be noted that the technology is still in its beginning stage and it must be developed in different aspects including generating power ability, endurance and cost-efficiency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008
Feasible integration in asphalt of piezoelectric cymbals for vibration energy harvesting
Moure, A., Izquierdo Rodríguez, M. A., Rueda, S. H., Gonzalo, A., Rubio-Marcos, F., Cuadros, D. U., Pérez-Lepe, A., & Fernández, J. F. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.01.030 · Cited by 157
Harvesting kinetic energy from roadway pavement through an electromagnetic speed bump
Gholikhani, M., Nasouri, R., Tahami, S. A., Legette, S., Dessouky, S., & Montoya, A. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.05.060 · Cited by 91
Self-citation
Cited by
Yuan, D., Jiang, W., Sha, A., Xiao, J., Wu, W., & Wang, T. (2023) · Applied Energy · doi:10.1016/j.apenergy.2022.120459 · Cited by 178
Crank shaft road electromagnetic road energy harvester for smart city applications
Zabihi, N., Gu, Z., & Saafi, M. (2023) · Applied Energy · doi:10.1016/j.apenergy.2023.122020 · Cited by 25
Mou, K., Ji, X., Li, X., Zhou, H., Wu, Y., & Fang, Y. (2025) · Materials · doi:10.3390/ma18040786 · Cited by 18
“The results show that the average output power of the harvester was 3.21 mW [21].”
Influential
Metadata
- Authors
- Gholikhani, M., Beheshti Shirazi, S. Y., Mabrouk, G. M., & Dessouky, S.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 230
- Pages
- 113804
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W3119349547
- Cited by
- 75
- References
- 3
- FWCI
- 5.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Dual electromagnetic energy harvesting technology for sustainable transportation systems. https://app.cochat.ai/papers/10.1016/j.enconman.2020.113804
- The paper
- Gholikhani, M., Beheshti Shirazi, S. Y., Mabrouk, G. M., & Dessouky, S. (2021). Dual electromagnetic energy harvesting technology for sustainable transportation systems. Energy Conversion and Management. https://doi.org/10.1016/j.enconman.2020.113804
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.