The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
Development of Micro Selective Laser Melting: The State of the Art and Future Perspectives
Open accessAbstract
Additive manufacturing (AM) is gaining traction in the manufacturing industry for the fabrication of components with complex geometries using a variety of materials. Selective laser melting (SLM) is a common AM technique that is based on powder-bed fusion (PBF) to process metals; however, it is currently focused only on the fabrication of macroscale and mesoscale components. This paper reviews the state of the art of the SLM of metallic materials at the microscale level. In comparison with the direct writing techniques that are commonly used for micro AM, micro SLM is attractive due to a number of factors, including a faster cycle time, process simplicity, and material versatility. A comprehensive evaluation of various research works and commercial systems for the fabrication of microscale parts using SLM and selective laser sintering (SLS) is conducted. In addition to identifying existing issues with SLM at the microscale, which include powder recoating, laser optics, and powder particle size, this paper details potential future directions. A detailed review of existing recoating methods in powder-bed techniques is conducted, along with a description of emerging efforts to implement dry powder dispensing methods in the AM domain. A number of secondary finishing techniques for AM components are reviewed, with a focus on implementation for microscale features and integration with micro SLM systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The origins and the future of microfluidics
Whitesides, G. M. (2006) · Nature · doi:10.1038/nature05058 · Cited by 9,687
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Becker, H. (2002) · Talanta · doi:10.1016/s0039-9140(01)00594-x · Cited by 1,187
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
Amato, K. N., Gaytan, S. M., Murr, L. E., Martinez, E., Shindo, P. W., Hernandez, J., Collins, S., & Medina, F. (2012) · Acta Materialia · doi:10.1016/j.actamat.2011.12.032 · Cited by 1,166
Liverani, E., Toschi, S., Ceschini, L., & Fortunato, A. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.05.042 · Cited by 990
Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
Huang, Y., Leu, M. C., Mazumder, J., & Donmez, A. (2015) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028725 · Cited by 947
Gokuldoss, P. K., Kolla, S., & Eckert, J. (2017) · Materials · doi:10.3390/ma10060672 · Cited by 804
Cherry, J. A., Davies, H. M., Mehmood, S., Lavery, N. P., Brown, S. G. R., & Sienz, J. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6297-2 · Cited by 755
3D printed microfluidics for biological applications
Ho, C. M. B., Ng, S. H., Li, K. H. H., & Yoon, Y.-J. (2015) · Lab on a Chip · doi:10.1039/c5lc00685f · Cited by 704
Fayazfar, H., Salarian, M., Rogalsky, A., Sarker, D., Russo, P., Paserin, V., & Toyserkani, E. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.018 · Cited by 665
Parametric analysis of the selective laser melting process
Yadroitsev, I., Bertrand, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.02.088 · Cited by 650
Tucho, W. M., Lysne, V. H., Austbø, H., Sjolyst-Kverneland, A., & Hansen, V. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.01.098 · Cited by 482
Hybrid processes in manufacturing
Lauwers, B., Klocke, F., Klink, A., Tekkaya, A. E., Neugebauer, R., & Mcintosh, D. (2014) · CIRP Annals · doi:10.1016/j.cirp.2014.05.003 · Cited by 474
Microstructural Control of Additively Manufactured Metallic Materials
Collins, P. C., Brice, D. A., Samimi, P., Ghamarian, I., & Fraser, H. L. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031816 · Cited by 461
Hybrid additive and subtractive machine tools – Research and industrial developments
Flynn, J. M., Shokrani, A., Newman, S. T., & Dhokia, V. (2016) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2015.11.007 · Cited by 459
Ma, M., Wang, Z., & Zeng, X. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.12.112 · Cited by 431
Song, B., Zhao, X., Li, S., Han, C., Wei, Q., Wen, S., Liu, J., & Shi, Y. (2015) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-015-0341-2 · Cited by 427
Fatigue performance of additive manufactured metallic parts
Spierings, A. B., Starr, T. L., & Wegener, K. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311302932 · Cited by 426
Olakanmi, E. O. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.03.009 · Cited by 418
Powder flowability characterisation methodology for powder-bed-based metal additive manufacturing
Spierings, A. B., Voegtlin, M., Bauer, T., & Wegener, K. (2015) · Progress in Additive Manufacturing · doi:10.1007/s40964-015-0001-4 · Cited by 415
Tan, J. H., Wong, W. L. E., & Dalgarno, K. W. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.011 · Cited by 407
Additive Manufacturing of Metal Structures at the Micrometer Scale
Hirt, L., Reiser, A., Spolenak, R., & Zambelli, T. (2017) · Advanced Materials · doi:10.1002/adma.201604211 · Cited by 400
Bagehorn, S., Wehr, J., & Maier, H. J. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.05.008 · Cited by 371
Particle-based simulation of powder application in additive manufacturing
Parteli, E. J. R., & Pöschel, T. (2016) · Powder Technology · doi:10.1016/j.powtec.2015.10.035 · Cited by 362
3D-printed microfluidic devices
Amin, R., Knowlton, S., Hart, A., Yenilmez, B., Ghaderinezhad, F., Katebifar, S., Messina, M., Khademhosseini, A., & Tasoglu, S. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/022001 · Cited by 349
Surface Modification of Ti6Al4V Open Porous Structures Produced by Additive Manufacturing
Pyka, G., Burakowski, A., Kerckhofs, G., Moesen, M., Van Bael, S., Schrooten, J., & Wevers, M. (2012) · Advanced Engineering Materials · doi:10.1002/adem.201100344 · Cited by 309
Part and material properties in selective laser melting of metals
Kruth, J., Badrossamay, M., Yasa, E., Deckers, J. P., Thijs, L., & Humbeeck, J. V. (2010) · Lirias · Cited by 303
Laser polishing of additive manufactured Ti alloys
Ma, C. P., Guan, Y. C., & Zhou, W. (2017) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2017.02.005 · Cited by 296
Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
Yasa, E., Kruth, J.-P., & Deckers, J. (2011) · CIRP Annals · doi:10.1016/j.cirp.2011.03.063 · Cited by 265
Laser polishing of parts built up by selective laser sintering
Lamikiz, A., Sánchez, J. A., López de Lacalle, L. N., & Arana, J. L. (2007) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2007.01.013 · Cited by 264
316L Stainless Steel with Gradient Porosity Fabricated by Selective Laser Melting
Li, R., Liu, J., Shi, Y., Du, M., & Xie, Z. (2010) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-009-9535-2 · Cited by 247
Rapid prototyping of microfluidic chips in COC
Steigert, J., Haeberle, S., Brenner, T., Müller, C., Steinert, C. P., Koltay, P., Gottschlich, N., Reinecke, H., Rühe, J., Zengerle, R., et al. (2007) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/17/2/020 · Cited by 194
Helmer, H. E., Körner, C., & Singer, R. F. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.192 · Cited by 189
Metal nanoparticle direct inkjet printing for low-temperature 3D micro metal structure fabrication
Ko, S. H., Chung, J., Hotz, N., Nam, K. H., & Grigoropoulos, C. P. (2010) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/20/12/125010 · Cited by 183
Prediction of sintered density for bimodal powder mixtures
German, R. M. (1992) · Metallurgical Transactions A · doi:10.1007/bf02647329 · Cited by 183
The role of powder layer thickness on the quality of SLM printed parts
Nguyen, Q. B., Luu, D. N., Nai, M. L. S., Zhu, Z., Chen, Z., & Wei, J. (2018) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2018.01.015 · Cited by 183
Self-citationAlMangour, B., Grzesiak, D., & Yang, J.-M. (2017) · Powder Technology · doi:10.1016/j.powtec.2016.12.073 · Cited by 176
Meier, C., Penny, R. W., Zou, Y., Gibbs, J. S., & Hart, A. J. (2017) · Annual Reviews of Heat Transfer · doi:10.1615/annualrevheattransfer.2018019042 · Cited by 174
Influence of energy density on metallurgy and properties in metal additive manufacturing
Yusuf, S. M., & Gao, N. (2017) · Materials Science and Technology · doi:10.1080/02670836.2017.1289444 · Cited by 163
Characteristics of Inconel Powders for Powder-Bed Additive Manufacturing
Nguyen, Q. B., Nai, M. L. S., Zhu, Z., Sun, C.-N., Wei, J., & Zhou, W. (2017) · Engineering · doi:10.1016/j.eng.2017.05.012 · Cited by 163
Self-citationLiu, B., Wildman, R. D., Tuck, C. J., Ashcroft, I., & Hague, R. (2011) · doi:10.26153/tsw/15290 · Cited by 159
Metering and dispensing of powder; the quest for new solid freeforming techniques
Yang, S., & Evans, J. (2007) · Powder Technology · doi:10.1016/j.powtec.2007.04.004 · Cited by 140
Additive nanomanufacturing – A review
Engstrøm, D. S., Porter, B. F., Pacios, M., & Bhaskaran, H. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.159 · Cited by 131
McLouth, T. D., Bean, G. E., Witkin, D. B., Sitzman, S. D., Adams, P. M., Patel, D. N., Park, W., Yang, J., & Zaldivar, R. J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.04.019 · Cited by 123
Optimization of Powder Layer Density in Selective Laser Sintering
Karapatis, N. P., Egger, G., Gygax, P. E., & Glardon, R. (1999) · Infoscience (Ecole Polytechnique Fédérale de Lausanne) · doi:10.26153/tsw/746 · Cited by 112
Alrbaey, K., Wimpenny, D. I., Barzinjy, A. A., & Moroz, A. (2016) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-016-2140-2 · Cited by 108
On the characterization of stainless steel 316L parts produced by selective laser melting
Yakout, M., Elbestawi, M. A., & Veldhuis, S. C. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1303-0 · Cited by 108
Micromanufacturing: A review—Part I
Jain, V. K., Sidpara, A. M., Balasubramaniam, R., et al. (2014) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/0954405414539487 · Cited by 85
Sutton, A. T., Kriewall, C. S., Leu, M.-C., & Newkirk, J. W. (2016) · Cited by 70
Boschetto, A., Bottini, L., & Veniali, F. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1059-6 · Cited by 63
Sheet steel lamination for rapid manufacturing
OBIKAWA, T., Yoshino, M., & Shinozuka, J. (1999) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(99)00027-8 · Cited by 52
An update on electrostatic powder coating for pharmaceuticals
Yang, Q., Ma, Y., Zhu, J., et al. (2017) · Particuology · doi:10.1016/j.partic.2016.10.001 · Cited by 50
Femtosecond laser post-processing of metal parts produced by laser additive manufacturing
Mingareev, I., Bonhoff, T., El-Sherif, A. F., Meiners, W., Kelbassa, I., Biermann, T., & Richardson, M. C. (2013) · Journal of Laser Applications · doi:10.2351/1.4824146 · Cited by 39
Cited by
du Plessis, A., Yadroitsava, I., & Yadroitsev, I. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108385 · Cited by 712
Additive manufacturing of metamaterials: A review
Askari, M., Hutchins, D. A., Thomas, P. J., Astolfi, L., Watson, R. L., Abdi, M., Ricci, M., Laureti, S., Nie, L., Freear, S., et al. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101562 · Cited by 470
Tshephe, T. S., Akinwamide, S. O., Olevsky, E., & Olubambi, P. A. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e09041 · Cited by 293
Abd-Elaziem, W., Elkatatny, S., Abd-Elaziem, A.-E., Khedr, M., Abd El-baky, M. A., Hassan, M. A., Abu-Okail, M., Mohammed, M., Järvenpää, A., Allam, T., et al. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.085 · Cited by 257
Basics of laser powder bed fusion
Yadroitsev, I., Yadroitsava, I., & Du Plessis, A. (2021) · Fundamentals of Laser Powder Bed Fusion of Metals · doi:10.1016/b978-0-12-824090-8.00024-x · Cited by 183
Metadata
- Authors
- Nagarajan, B., Hu, Z., Song, X., Zhai, W., & Wei, J.
- Venue
- Engineering
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 5
- Issue
- 4
- Pages
- 702-720
- ISSN
- 2095-8099 (ISSN-L)
- OpenAlex
- W2955972648
- Cited by
- 254
- References
- 60
- FWCI
- 14.38
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.