The DOI matches its Crossref record; 120 of the 120 references it cites were found in a registry or an index.
Hydration Characteristics and Microstructure of Alkali-Activated Slag Concrete: A Review
Open accessAbstract
Alkali-activated slag concrete (AASC) is a new green building material. The amount of CO2 produced by AASC is 1/5th of that produced by ordinary Portland cement concrete (OPCC). In addition, AASC promotes the reuse of slag and other wastes and saves resources. Furthermore, the scope of use of slag has been expanded. The progress of the research on the hydration characteristics, microstructure, interfacial transition zone, and pore structure of AASC based on the relevant literatures was analyzed and summarized in this study. The influences of the slag composition, the type and dosage of the alkali activator, and the curing conditions on the hydration characteristics and the microstructure of the AASC were discussed. Relatively few research results on the microstructure of AASC are available, and the relevant conclusions are not completely consistent. Moreover, there are many constraints on the development of AASC (e.g., complex composition of raw materials of slag, large shrinkage deformation, and low fluidity). Therefore, further research is required.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Turner, L. K., & Collins, F. G. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.023 · Cited by 2,411
Geopolymers and Related Alkali-Activated Materials
Provis, J. L., & Bernal, S. A. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113515 · Cited by 1,597
Advances in understanding alkali-activated materials
Provis, J. L., Palomo, A., & Shi, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.013 · Cited by 1,537
On the Development of Fly Ash-Based Geopolymer Concrete
(2004) · ACI Materials Journal · doi:10.14359/13485 · Cited by 1,254
Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume
Qing, Y., Zenan, Z., Deyu, K., & Rongshen, C. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2005.09.001 · Cited by 1,242
Alkali-Activated Cements and Concretes
Shi, C., Krivenko, P. V., & Roy, D. (2006) · Taylor & Francis eBooks · doi:10.4324/9780203390672 · Cited by 1,164
A review: The comparison between alkali-activated slag (Si + Ca) and metakaolin (Si + Al) cements
Li, C., Sun, H., & Li, L. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.03.020 · Cited by 1,108
Richardson, I. G. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.05.034 · Cited by 1,082
Bernal, S. A., Provis, J. L., Walkley, B., San Nicolas, R., Gehman, J. D., Brice, D. G., Kilcullen, A. R., Duxson, P., & van Deventer, J. S. J. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.06.007 · Cited by 1,019
Hydration products of alkali activated slag cement
Wang, S.-D., & Scrivener, K. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00045-e · Cited by 997
Cited by
Gao, M., Li, M., Jing, H., Sha, W., & Wang, J. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.139635 · Cited by 34
Reddy, A. S., Pagano, A. G., Iyer, K. K. R., & Dave, T. N. (2026) · International Journal of Geosynthetics and Ground Engineering · doi:10.1007/s40891-026-00744-0
Metadata
- Authors
- Fu, Q., Bu, M., Zhang, Z., Xu, W., Yuan, Q., & Niu, D.
- Venue
- Engineering
- Publisher
- Elsevier BV
- Published
- 2023-01
- Volume
- 20
- Pages
- 162-179
- ISSN
- 2095-8099 (ISSN-L)
- OpenAlex
- W4200559231
- Cited by
- 272
- References
- 120
- FWCI
- 13.77
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.