The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Dendrite-free Li metal deposition in all-solid-state lithium sulfur batteries with polymer-in-salt polysiloxane electrolyte
Abstract
Abstract Replacement of solid polymer electrolyte (SPE) to routine liquid electrolyte is highly desirable for high-energy-density lithium sulfur batteries due to its low volatility, high safety and the ability to suppress shuttle effect. Herein, a polymer-in-salt polysiloxane SPE was fabricated with bi-grafted polysiloxane copolymer, lithium bis(trifluoromethanesulfonyl)imide and poly(vinylidene fluoride), which shows higher ionic conductivity (7.8 × 10-4 S cm-1 at 25 °C). To obtain the satisfactory ionic conductivity and high mechanical property of solid electrolyte simultaneously, cellulose acetate matrix was combined as a rigid substrate to prepare composite polymer electrolyte (CPE) that possesses high ionic conductivity (4.0 × 10-4 S cm-1), enhanced mechanical strength (6.8 MPa), wide electrochemical stability window (4.7 V vs. Li+/Li), and high ion transference number (0.52) at ambient temperature. In addition, the CPE effectively inhibits the growth of lithium dendrites and diffusion of polysulfides. The assembled lithium sulfur battery with CPE exhibits good room-temperature cycling performance at 1C, which indicates that such polymer-in-salt polysiloxane based composite electrolyte membranes can be applied to ambient temperature all-solid-state lithium sulfur batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Chen, L., Li, Y., Li, S.-P., Fan, L.-Z., Nan, C.-W., & Goodenough, J. B. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.12.037 · Cited by 1,423
Self-citationGao, Z., Sun, H., Fu, L., Ye, F., Zhang, Y., Luo, W., & Huang, Y. (2018) · Advanced Materials · doi:10.1002/adma.201705702 · Cited by 1,300
Zhang, X., Liu, T., Zhang, S., Huang, X., Xu, B., Lin, Y., Xu, B., Li, L., Nan, C.-W., & Shen, Y. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06364 · Cited by 1,017
Ionic Conductivity Enhancement of Polymer Electrolytes with Ceramic Nanowire Fillers
Liu, W., Liu, N., Sun, J., Hsu, P.-C., Li, Y., Lee, H.-W., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00600 · Cited by 1,001
Fu, K. (., Gong, Y., Dai, J., Gong, A., Han, X., Yao, Y., Wang, C., Wang, Y., Chen, Y., Yan, C., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1600422113 · Cited by 930
Khurana, R., Schaefer, J. L., Archer, L. A., & Coates, G. W. (2014) · Journal of the American Chemical Society · doi:10.1021/ja502133j · Cited by 880
Prestoring Lithium into Stable 3D Nickel Foam Host as Dendrite‐Free Lithium Metal Anode
Chi, S., Liu, Y., Song, W., Fan, L., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700348 · Cited by 846
Self-citationChen, R., Qu, W., Guo, X., Li, L., & Wu, F. (2016) · Materials Horizons · doi:10.1039/c6mh00218h · Cited by 797
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
Artificial Soft–Rigid Protective Layer for Dendrite‐Free Lithium Metal Anode
Xu, R., Zhang, X., Cheng, X., Peng, H., Zhao, C., Yan, C., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705838 · Cited by 670
Beyond lithium ion batteries: Higher energy density battery systems based on lithium metal anodes
Shen, X., Liu, H., Cheng, X.-B., Yan, C., & Huang, J.-Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.12.002 · Cited by 653
Zhang, J., Zhao, J., Yue, L., Wang, Q., Chai, J., Liu, Z., Zhou, X., Li, H., Guo, Y., Cui, G., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501082 · Cited by 636
Self-citationCarbon materials for Li–S batteries: Functional evolution and performance improvement
Liang, J., Sun, Z.-H., Li, F., & Cheng, H.-M. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.007 · Cited by 593
Rubbery solid electrolytes with dominant cationic transport and high ambient conductivity
Angell, C. A., Liu, C., & Sanchez, E. (1993) · Nature · doi:10.1038/362137a0 · Cited by 550
Chai, J., Liu, Z., Ma, J., Wang, J., Liu, X., Liu, H., Zhang, J., Cui, G., & Chen, L. (2017) · Advanced Science · doi:10.1002/advs.201600377 · Cited by 538
Self-citationZeng, X.-X., Yin, Y.-X., Li, N.-W., Du, W.-C., Guo, Y.-G., & Wan, L.-J. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10088 · Cited by 459
Liu, W., Lin, D., Sun, J., Zhou, G., & Cui, Y. (2016) · ACS Nano · doi:10.1021/acsnano.6b06797 · Cited by 443
Zhang, J., Zang, X., Wen, H., Dong, T., Chai, J., Li, Y., Chen, B., Zhao, J., Dong, S., Ma, J., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10066j · Cited by 430
Self-citationLi, D., Chen, L., Wang, T., & Fan, L.-Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18123 · Cited by 398
Self-citationCheng, X.-B., Yan, C., Huang, J.-Q., Li, P., Zhu, L., Zhao, L., Zhang, Y., Zhu, W., Yang, S.-T., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.09.003 · Cited by 394
Engineering of lithium-metal anodes towards a safe and stable battery
Wang, L., Zhou, Z., Yan, X., Hou, F., Wen, L., Luo, W., Liang, J., & Dou, S. X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.014 · Cited by 270
Li 2 S 5 -based ternary-salt electrolyte for robust lithium metal anode
Zhao, C.-Z., Cheng, X.-B., Zhang, R., Peng, H.-J., Huang, J.-Q., Ran, R., Huang, Z.-H., Wei, F., & Zhang, Q. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.01.007 · Cited by 260
Pan, Q., Barbash, D., Smith, D. M., Qi, H., Gleeson, S. E., & Li, C. Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701231 · Cited by 155
Highly Conductive Siloxane Polymers
Hooper, R., Lyons, L. J., Mapes, M. K., Schumacher, D., Moline, D. A., & West, R. (2001) · Macromolecules · doi:10.1021/ma0018446 · Cited by 153
Electrospun polyimide-based fiber membranes as polymer electrolytes for lithium-ion batteries
Wang, Q., Song, W., Wang, L., Song, Y., Shi, Q., & Fan, L. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.04.053 · Cited by 111
Self-citationOh, B., Vissers, D. R., Zhang, Z., et al. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00187-3 · Cited by 106
Ma, Q., Qi, X., Tong, B., Zheng, Y., Feng, W., Nie, J., Hu, Y., Li, H., Huang, X., Chen, L., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10597 · Cited by 103
Self-citationTunable Networks from Thiolene Chemistry for Lithium Ion Conduction
Walker, C. N., Versek, C., Touminen, M., et al. (2012) · ACS Macro Letters · doi:10.1021/mz300090m · Cited by 83
Polymer-in-Salt Electrolytes Based on Acrylonitrile/Butyl Acrylate Copolymers and Lithium Salts
Florjańczyk, Z., Zygadło-Monikowska, E., Wieczorek, W., Ryszawy, A., Tomaszewska, A., Fredman, K., Golodnitsky, D., Peled, E., & Scrosati, B. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp049195d · Cited by 77
Synthesis and electrochemistry of polymer based electrolytes for lithium batteries
Grünebaum, M., Hiller, M. M., Jankowsky, S., et al. (2014) · Progress in Solid State Chemistry · doi:10.1016/j.progsolidstchem.2014.04.004 · Cited by 60
Rossi, N. A. A., Wang, Q., Amine, K., & West, R. (2010) · Silicon · doi:10.1007/s12633-010-9056-5 · Cited by 23
Cited by
A review of rechargeable batteries for portable electronic devices
Liang, Y., Zhao, C., Yuan, H., Chen, Y., Zhang, W., Huang, J., Yu, D., Liu, Y., Titirici, M., Chueh, Y., et al. (2019) · InfoMat · doi:10.1002/inf2.12000 · Cited by 1,174
Towards practical lithium-metal anodes
Zhang, X., Yang, Y., & Zhou, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00838a · Cited by 726
High-safety separators for lithium-ion batteries and sodium-ion batteries: advances and perspective
Zhang, L., Li, X., Yang, M., & Chen, W. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.06.033 · Cited by 587
Filler‐Integrated Composite Polymer Electrolyte for Solid‐State Lithium Batteries
Liu, S., Liu, W., Ba, D., Zhao, Y., Ye, Y., Li, Y., & Liu, J. (2023) · Advanced Materials · doi:10.1002/adma.202110423 · Cited by 542
Yang, X., Luo, J., & Sun, X. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00635d · Cited by 520
Metadata
- Authors
- Chen, L., & Fan, L.
- Venue
- Energy Storage Materials
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 15
- Pages
- 37-45
- ISSN
- 2405-8289 (ISSN-L)
- 2405-8297
- OpenAlex
- W2793464730
- Cited by
- 259
- References
- 34
- FWCI
- 12.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.