The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Problems and their origins of Ni-rich layered oxide cathode materials
Open accessAbstract
Abstract Ni-rich layered oxides, LiNixCoyMnzO2 (NCM) and LiNixCoyAlzO2 (NCA) with x + y + z = 1 and x ≥ 0.8, are regarded to be the best choice for the cathode material of high energy Li-ion batteries due to their combined advantages in capacity, working potential and manufacture cost. However, their application in practical Li-ion batteries is hindered by two essential problems of (1) performance degradation and (2) safety hazard over the whole life of battery. Performance degradation behaves as declines in battery's capacity and working voltage as well as the battery's swelling and impedance growth; Safety hazard arises from thermal runaway under abuse conditions such as overcharging, overheating, and electric shorting. It appears that nearly all problems can be ultimately attributed to the loss of oxygen, especially caused by the oxidation of lattice oxygen in H3 phase where the capacities are contributed by both of the Ni and O redox couples. In this review, the problems and their origins of Ni-rich layered oxides are overviewed, and the solutions attempted to mitigate these problems are outlined.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Noh, H.-J., Youn, S., Yoon, C. S., & Sun, Y.-K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.063 · Cited by 2,302
Ryu, H.-H., Park, K.-J., Yoon, C. S., & Sun, Y.-K. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b05269 · Cited by 1,629
Lin, F., Markus, I. M., Nordlund, D., Weng, T.-C., Asta, M. D., Xin, H. L., & Doeff, M. M. (2014) · Nature Communications · doi:10.1038/ncomms4529 · Cited by 1,481
Myung, S.-T., Maglia, F., Park, K.-J., Yoon, C. S., Lamp, P., Kim, S.-J., & Sun, Y.-K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00594 · Cited by 1,382
Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries
Fan, X., Chen, L., Borodin, O., Ji, X., Chen, J., Hou, S., Deng, T., Zheng, J., Yang, C., Liou, S.-C., et al. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0183-2 · Cited by 1,371
Jung, R., Metzger, M., Maglia, F., Stinner, C., & Gasteiger, H. A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0021707jes · Cited by 1,350
Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives
Manthiram, A., Knight, J. C., Myung, S., Oh, S., & Sun, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501010 · Cited by 1,202
Jung, S., Gwon, H., Hong, J., Park, K., Seo, D., Kim, H., Hyun, J., Yang, W., & Kang, K. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300787 · Cited by 1,124
Bak, S.-M., Hu, E., Zhou, Y., Yu, X., Senanayake, S. D., Cho, S.-J., Kim, K.-B., Chung, K. Y., Yang, X.-Q., & Nam, K.-W. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am506712c · Cited by 1,010
Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6 V
Zhang, J.-N., Li, Q., Ouyang, C., Yu, X., Ge, M., Huang, X., Hu, E., Ma, C., Li, S., Xiao, R., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0409-z · Cited by 882
Thermal Runaway of Lithium-Ion Batteries without Internal Short Circuit
Liu, X., Ren, D., Hsu, H., Feng, X., Xu, G.-L., Zhuang, M., Gao, H., Lu, L., Han, X., Chu, Z., et al. (2018) · Joule · doi:10.1016/j.joule.2018.06.015 · Cited by 869
Thermal stability of LixCoO2, LixNiO2 and λ-MnO2 and consequences for the safety of Li-ion cells
Dahn, J. R., FULLER, E., Obrovac, M. N., & VONSACKEN, U. (1994) · Solid State Ionics · doi:10.1016/0167-2738(94)90415-4 · Cited by 854
Schipper, F., Erickson, E. M., Erk, C., Shin, J.-Y., Chesneau, F. F., & Aurbach, D. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0351701jes · Cited by 762
In situ x-ray diffraction and electrochemical studies of Li1−xNiO2
LI, W., Reimers, J. N., & Dahn, J. R. (1993) · Solid State Ionics · doi:10.1016/0167-2738(93)90317-v · Cited by 745
Kondrakov, A. O., Schmidt, A., Xu, J., Geßwein, H., Mönig, R., Hartmann, P., Sommer, H., Brezesinski, T., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b12885 · Cited by 701
Schipper, F., Bouzaglo, H., Dixit, M., Erickson, E. M., Weigel, T., Talianker, M., Grinblat, J., Burstein, L., Schmidt, M., Lampert, J., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701682 · Cited by 565
Study of the Failure Mechanisms of LiNi0.8Mn0.1Co0.1O2Cathode Material for Lithium Ion Batteries
Li, J., Downie, L. E., Ma, L., Qiu, W., & Dahn, J. R. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.1011507jes · Cited by 516
Wandt, J., Freiberg, A. T. S., Ogrodnik, A., & Gasteiger, H. A. (2018) · Materials Today · doi:10.1016/j.mattod.2018.03.037 · Cited by 496
A Mg-Doped High-Nickel Layered Oxide Cathode Enabling Safer, High-Energy-Density Li-Ion Batteries
Xie, Q., Li, W., & Manthiram, A. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b03900 · Cited by 404
High Voltage Operation of Ni‐Rich NMC Cathodes Enabled by Stable Electrode/Electrolyte Interphases
Zhao, W., Zheng, J., Zou, L., Jia, H., Liu, B., Wang, H., Engelhard, M. H., Wang, C., Xu, W., Yang, Y., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800297 · Cited by 389
Yabuuchi, N., Makimura, Y., & Ohzuku, T. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2455585 · Cited by 387
Charge-Transfer-Induced Lattice Collapse in Ni-Rich NCM Cathode Materials during Delithiation
Kondrakov, A. O., Geßwein, H., Galdina, K., de Biasi, L., Meded, V., Filatova, E. O., Schumacher, G., Wenzel, W., Hartmann, P., Brezesinski, T., et al. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b06598 · Cited by 367
Characterization and cathode performance of Li1 − xNi1 + xO2 prepared with the excess lithium method
Arai, H. (1995) · Solid State Ionics · doi:10.1016/0167-2738(95)00144-u · Cited by 365
A First-Principles Approach to Studying the Thermal Stability of Oxide Cathode Materials
Wang, L., Maxisch, T., & Ceder, G. (2007) · Chemistry of Materials · doi:10.1021/cm0620943 · Cited by 359
Jo, C., Cho, D.-H., Noh, H.-J., Yashiro, H., Sun, Y., & Myung, S. (2014) · Nano Research · doi:10.1007/s12274-014-0631-8 · Cited by 359
Surface modification of poly(vinylidene fluoride) by alkaline treatment1. The degradation mechanism
Ross, G. J., Watts, J. F., Hill, M. P., & Morrissey, P. (2000) · Polymer · doi:10.1016/s0032-3861(99)00343-2 · Cited by 355
Scavenging Materials to Stabilize LiPF6‐Containing Carbonate‐Based Electrolytes for Li‐Ion Batteries
Han, J., Kim, K., Lee, Y., & Choi, N. (2019) · Advanced Materials · doi:10.1002/adma.201804822 · Cited by 354
Oxygen Release Induced Chemomechanical Breakdown of Layered Cathode Materials
Mu, L., Lin, R., Xu, R., Han, L., Xia, S., Sokaras, D., Steiner, J. D., Weng, T.-C., Nordlund, D., Doeff, M. M., et al. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b01036 · Cited by 345
Is Cobalt Needed in Ni-Rich Positive Electrode Materials for Lithium Ion Batteries?
Li, H., Cormier, M., Zhang, N., Inglis, J., Li, J., & Dahn, J. R. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.1381902jes · Cited by 343
Effect of Residual Lithium Compounds on Layer Ni-Rich Li[Ni0.7Mn0.3]O2
Cho, D.-H., Jo, C.-H., Cho, W., Kim, Y.-J., Yashiro, H., Sun, Y.-K., & Myung, S.-T. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.042406jes · Cited by 340
Li, W., Liu, X., Celio, H., Smith, P., Dolocan, A., Chi, M., & Manthiram, A. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703154 · Cited by 339
Dixit, M., Markovsky, B., Schipper, F., Aurbach, D., & Major, D. T. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b06122 · Cited by 309
Li, H., Zhou, P., Liu, F., Li, H., Cheng, F., & Chen, J. (2019) · Chemical Science · doi:10.1039/c8sc03385d · Cited by 307
Intrinsic Origins of Crack Generation in Ni-rich LiNi0.8Co0.1Mn0.1O2 Layered Oxide Cathode Material
Lim, J.-M., Hwang, T., Kim, D., Park, M.-S., Cho, K., & Cho, M. (2017) · Scientific Reports · doi:10.1038/srep39669 · Cited by 305
Zhang, S. S. (2019) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2019.05.013 · Cited by 298
Self-citationOrigin of Carbon Dioxide Evolved during Cycling of Nickel-Rich Layered NCM Cathodes
Hatsukade, T., Schiele, A., Hartmann, P., Brezesinski, T., & Janek, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13158 · Cited by 256
Wang, Y., Jiang, J., & Dahn, J. R. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2007.07.033 · Cited by 231
Min, K., Seo, S.-W., Song, Y. Y., Lee, H. S., & Cho, E. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp06270a · Cited by 223
Kong, F., Liang, C., Longo, R. C., Yeon, D.-H., Zheng, Y., Park, J.-H., Doo, S., & Cho, K. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02627 · Cited by 177
Effects of CO2 in air on Li deintercalation from LiNi1−x−yCoxAlyO2
Matsumoto, K., Kuzuo, R., TAKEYA, K., & Yamanaka, A. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00216-5 · Cited by 170
Dixit, M., Markovsky, B., Aurbach, D., & Major, D. T. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0561701jes · Cited by 162
Improving the Capacity Retention of LiCoO[sub 2] Cycled to 4.5 V by Heat-Treatment
Chen, Z., & Dahn, J. R. (2003) · Electrochemical and Solid-State Letters · doi:10.1149/1.1628871 · Cited by 144
Pires, J., Castets, A., Timperman, L., Santos-Peña, J., Dumont, E., Levasseur, S., Tessier, C., Dedryvère, R., & Anouti, M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.065 · Cited by 140
Han, B., Key, B., Lapidus, S. H., Garcia, J. C., Iddir, H. H., Vaughey, J. T., & Doğan, F. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13597 · Cited by 135
Ryu, H., Park, G., Yoon, C. S., & Sun, Y. (2018) · Small · doi:10.1002/smll.201803179 · Cited by 126
Tornheim, A. P., Sharifi‐Asl, S., Garcia, J. C., Bareño, J., Iddir, H. H., Shahbazian‐Yassar, R., & Zhang, Z. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.10.065 · Cited by 126
Elucidation of LixNi0.8Co0.15Al0.05O2 Redox Chemistry by Operando Raman Spectroscopy
Flores, E., Vonrüti, N., Novák, P., Aschauer, U., & Berg, E. J. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b01384 · Cited by 122
Neudeck, S., Strauss, F., García, G., Wolf, H., Janek, J., Hartmann, P., & Brezesinski, T. (2019) · Chemical Communications · doi:10.1039/c8cc09618j · Cited by 98
Pham, H. Q., Hwang, E., Kwon, Y., & Song, S. (2019) · Chemical Communications · doi:10.1039/c8cc10017a · Cited by 96
Facile Mn Surface Doping of Ni-Rich Layered Cathode Materials for Lithium Ion Batteries
Cho, W., Lim, Y. J., Lee, S.-M., Kim, J. H., Song, J.-H., Yu, J., Kim, Y., & Park, M. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13766 · Cited by 91
Sun, Y., Myung, S., Bang, H. J., Park, B.-C., Park, S.-J., & Sung, N.-E. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2763970 · Cited by 34
Pyrite FeS2 as an in-situ oxygen remover for rechargeable batteries with layered cathode materials
Zhang, S. S., & Tran, D. T. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.09.079 · Cited by 19
Self-citation
Cited by
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Jiang, M., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202103005 · Cited by 720
Ren, D., Feng, X., Liu, L., Hsu, H., Lu, L., Wang, L., He, X., & Ouyang, M. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.020 · Cited by 698
Boron-doped sodium layered oxide for reversible oxygen redox reaction in Na-ion battery cathodes
Guo, Y.-J., Wang, P.-F., Niu, Y.-B., Zhang, X.-D., Li, Q., Yu, X., Fan, M., Chen, W.-P., Yu, Y., Liu, X., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-25610-7 · Cited by 422
Ren, W., Ding, C., Fu, X., & Huang, Y. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.018 · Cited by 385
Metadata
- Authors
- Zhang, S. S.
- Venue
- Energy Storage Materials
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 24
- Pages
- 247-254
- ISSN
- 2405-8289 (ISSN-L)
- 2405-8297
- OpenAlex
- W2968782665
- Cited by
- 746
- References
- 52
- FWCI
- 23.26
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.