The DOI matches its Crossref record; 363 of the 363 references it cites were found in a registry or an index.
A review on the thermomechanical properties and biodegradation behaviour of polyesters
Open accessAbstract
The increasing societal concerns about the environmental impact of plastic waste, together with the depletion of petroleum resources, makes it imperative to develop environmentally friendly products that would potentially replace conventional petroleum based materials. Due to their inherent thermomechanical behaviour and biodegradability, biodegradable polyesters have shown explosive growth and underpin the global shift towards sustainability. In fact, the potential of ester groups to undergo hydrolytic chain scissions has brought biodegradable polyesters to the forefront of polymer science, both in fundamental research and industry level. Although the field of biodegradable polymers has been traditionally limited to aliphatic polyesters, recently, the introduction of aromatic rings into the polymer structure has allowed obtaining aliphatic/aromatic polyesters with much broader thermal, mechanical and biodegradation properties. The discovery of new synthetic approaches has boosted the development of novel biodegradable polyesters, with reported properties equivalent or even superior to conventional polymers. As polymer chemistry is a property driven science, the thermomechanical properties are often the most relevant aspects that determine product performance specifications and play a pivotal role towards the definition of the specific end-use applications of polymeric materials. Coupled with an understanding of polymer biodegradability, including hydrolytic and enzymatic degradation behaviour, the stage is set for a broadening impact of these systems on global sustainable polymer challenges. Accordingly, this review establishes an up-to-date state-of-the-art in the field of biodegradable polyesters, thoroughly analyzing and comparing their thermal, mechanical and biodegradation properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–363 of 363
Faÿ, F., Renard, E., Langlois, V., Linossier, I., & Vallée‐Rehel, K. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.07.045 · Cited by 98
Hu, H., Zhang, R., Wang, J., Ying, W. B., & Zhu, J. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.03.009 · Cited by 98
Palsikowski, P. A., Roberto, M. M., Sommaggio, L. R. D., Souza, P. M. S., Morales, A. R., & Marin‐Morales, M. A. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-0990-9 · Cited by 97
The effect of gamma irradiation on the enzymatic degradation of polyglycolic acid absorbable sutures
Chu, C. C., & Williams, D. F. (1983) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820170612 · Cited by 94
Lu, J., Wu, L., & Li, B. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01050 · Cited by 94
Witt, U., Müller, R., & Deckwer, W. ‐. (1996) · Journal of Polymers and the Environment · doi:10.1007/bf02083878 · Cited by 93
Novel Poly(3-hydroxyoctanoate)/Poly(3-hydroxybutyrate) blends for medical applications
Basnett, P., Ching, K. Y., Stolz, M., Knowles, J. C., Boccaccini, A. R., Smith, C. L., Locke, I. C., Keshavarz, T., & Roy, I. (2013) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2013.03.019 · Cited by 92
Wang, H.-H., Li, X.-T., & Chen, G. (2008) · Process Biochemistry · doi:10.1016/j.procbio.2008.09.014 · Cited by 92
Dahl, S. R., Olsen, K. M., & Strand, D. H. (2011) · Journal of Chromatography B · doi:10.1016/j.jchromb.2011.12.009 · Cited by 91
Lizundia, E., Makwana, V. A., Larrañaga, A., Vilas‐Vilela, J. L., & Shaver, M. P. (2017) · Polymer Chemistry · doi:10.1039/c7py00695k · Cited by 91
Self-citationBiosynthesis and Biodegradation of 3-Hydroxypropionate- Containing Polyesters
Andreeßen, B., & Steinbüchel, A. (2010) · Applied and Environmental Microbiology · doi:10.1128/aem.01015-10 · Cited by 90
Luo, S., Li, F., Yu, J., & 曹阿民 (2009) · Journal of Applied Polymer Science · doi:10.1002/app.31346 · Cited by 90
Terzopoulou, Z. N., Tsanaktsis, V., Bikiaris, D. Ν., Exarhopoulos, S., Papageorgiou, D. G., & Papageorgiou, G. Z. (2016) · RSC Advances · doi:10.1039/c6ra15994j · Cited by 90
Biodegradation of Polyester Copolymers Containing Aromatic Compounds
Witt, U., Müller, R., & Deckwer, W. ‐. (1995) · Journal of Macromolecular Science Part A · doi:10.1080/10601329508010296 · Cited by 89
Jeong, C. G., & Hollister, S. J. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31568 · Cited by 88
Almeida, L. R., Martins, A. R., Fernandes, E. M., Oliveira, M. B., Correlo, V. M., Pashkuleva, I., Marques, A. P., Ribeiro, A. S., Durães, N. F., Silva, C., et al. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.05.019 · Cited by 88
Hu, H., Zhang, R., Shi, L., Ying, W. B., Wang, J., & Zhu, J. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b02169 · Cited by 87
Miscibility, mechanical and thermal properties of poly(lactic acid)/polyester-diol blends
Okamoto, K., Ichikawa, T., Yokohara, T., & Yamaguchi, M. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.05.011 · Cited by 85
Engineering of Metabolic Pathways by Artificial Enzyme Channels
Pröschel, M., Detsch, R., Boccaccini, A. R., & Sonnewald, U. (2015) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2015.00168 · Cited by 84
Effect of Aging on the Mechanical Properties of Poly(3-hydroxybutyrate- co -3-hydroxyhexanoate)
Alata, H., Aoyama, T., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma070418i · Cited by 80
Papageorgiou, G. Z., Vassiliou, A. A., Karavelidis, V., Koumbis, A. E., & Bikiaris, D. Ν. (2008) · Macromolecules · doi:10.1021/ma702508m · Cited by 80
Structure and mechanical properties of PGA crystals and fibres
de Oca, H. M., & Ward, I. M. (2006) · Polymer · doi:10.1016/j.polymer.2006.07.045 · Cited by 79
Karimi, P., Rizkalla, A. S., & Mequanint, K. (2010) · Materials · doi:10.3390/ma3042346 · Cited by 79
Sikorska, W., Musioł, M., Nowak, B., Pajak, J., Łabużek, S., Kowalczuk, M. M., & Adamus, G. (2015) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2015.03.021 · Cited by 79
Costa-Pinto, A. R., Correlo, V. M., Sol, P. C., Bhattacharya, M., Srouji, S., Livne, E., Reis, R. L., & Neves, N. M. (2011) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.391 · Cited by 79
A Novel PHB Depolymerase from a Thermophilic Streptomyces Sp.
Calabia, B. P., & Tokiwa, Y. (2006) · Biotechnology Letters · doi:10.1007/s10529-005-6063-5 · Cited by 78
Liu, W., & Chen, G. (2007) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-007-1092-8 · Cited by 78
Soccio, M., Lotti, N., Finelli, L., Gazzano, M., & Munari, A. (2007) · Polymer · doi:10.1016/j.polymer.2007.04.007 · Cited by 77
Tsuge, T., Saito, Y., Kikkawa, Y., Hiraishi, T., & Doi, Y. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200300077 · Cited by 77
Degradation and Viscoelastic Properties of PLA-PCL, PGA-PCL, PDO and PGA Fibres
Vieira, A. C., Vieira, J. C., Guedes, R. M., & Marques, A. T. (2010) · Materials science forum · doi:10.4028/www.scientific.net/msf.636-637.825 · Cited by 76
Two Types of Lipases in Hydrolysis of Polyester
Tokiwa, Y., Suzuki, T., & Takeda, K. (1988) · Agricultural and Biological Chemistry · doi:10.1271/bbb1961.52.1937 · Cited by 75
Gleadall, A., Pan, J., Kruft, M.-A. B., & Kellomäki, M. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.01.017 · Cited by 74
Protein engineering and discovery of lipases
Kourist, R., Brundiek, H. B., & Bornscheuer, U. T. (2010) · European Journal of Lipid Science and Technology · doi:10.1002/ejlt.200900143 · Cited by 74
Myers, D., Witt, T., Cyriac, A., Bown, M., Mecking, S., & Williams, C. K. (2017) · Polymer Chemistry · doi:10.1039/c7py00985b · Cited by 74
Maeda, Y., Nakayama, A., Kawasaki, N., Hayashi, K., Aiba, S., & Yamamoto, N. (1997) · Polymer · doi:10.1016/s0032-3861(96)01088-9 · Cited by 73
Japu, C., de Ilarduya, A. M., Alla, A., Jiang, Y. F., Loos, K., & Muñoz‐Guerra, S. (2015) · Biomacromolecules · doi:10.1021/bm501771e · Cited by 73
Lindström, A., Albertsson, A., & Hakkarainen, M. (2003) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.07.001 · Cited by 72
Fernández, J., Larrañaga, A., Etxeberria, A., & Sarasua, J.-R. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.12.014 · Cited by 71
Self-citationOcular delivery using poly(ortho esters)
Heller, J. (2005) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2005.09.007 · Cited by 70
Gigli, M., Negroni, A., Zanaroli, G., Lotti, N., Fava, F., & Munari, A. (2013) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2013.03.007 · Cited by 69
He, B., Wan, Y., Bei, J., & Wang, S. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.12.030 · Cited by 69
Kwiatkowska, M., Kowalczyk, I., Kwiatkowski, K., Szymczyk, A., & Roslaniec, Z. (2016) · Polymer · doi:10.1016/j.polymer.2016.07.060 · Cited by 69
Hydrolytic degradation of microbial poly(hydroxyalkanoates)
Doi, Y., Kanesawa, Y., Kawaguchi, Y., & Kunioka, M. (1989) · Die Makromolekulare Chemie Rapid Communications · doi:10.1002/marc.1989.030100506 · Cited by 68
Fungal degradation of poly(ethylene succinate)
Ishii, N., Inoue, Y., Shimada, K.-I., Tezuka, Y., Mitomo, H., & Kasuya, K. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2006.09.014 · Cited by 68
Synthetic bioresorbable polymers
Cameron, R. E., & Kamvari-Moghaddam, A. (2012) · Elsevier eBooks · doi:10.1533/9780857096517.1.96 · Cited by 68
Tappel, R. C., Wang, Q., & Nomura, C. T. (2012) · Journal of Bioscience and Bioengineering · doi:10.1016/j.jbiosc.2011.12.004 · Cited by 68
Microbial degradation of aliphatic polyesters
Tokiwa, Y., & Jarerat, A. (2003) · Macromolecular Symposia · doi:10.1002/masy.200351131 · Cited by 68
Souza, P. M. S., Corroqué, N. A., Morales, A. R., Marin‐Morales, M. A., & Mei, L. H. I. (2013) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0604-0 · Cited by 68
Han, X., & Pan, J. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.005 · Cited by 68
Miao, L., Qiu, Z., Yang, W., et al. (2007) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2007.11.001 · Cited by 68
Mincheva, R., Delangre, A., Raquez, J., Narayan, R., & Dúbois, P. (2013) · Biomacromolecules · doi:10.1021/bm301965h · Cited by 68
Brandl, H., & P�chner, P. (1992) · Biodegradation · doi:10.1007/bf00114555 · Cited by 67
Gleadall, A., Pan, J., & Atkinson, H. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.023 · Cited by 67
Dånmark, S., Finne‐Wistrand, A., Schander, K., Hakkarainen, M., Arvidson, K., Mustafa, K., & Albertsson, A. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.02.011 · Cited by 67
Zhang, D., Hillmyer, M. A., & Tolman, W. B. (2004) · Macromolecules · doi:10.1021/ma048092q · Cited by 67
Enzymatic degradation of microbial poly(3-hydroxyalkanoates)
Kanesawa, Y., Tanahashi, N., Doi, Y., & Saito, T. (1994) · Polymer Degradation and Stability · doi:10.1016/0141-3910(94)90135-x · Cited by 66
New biomaterials from renewable resources – amphiphilic block copolymers from δ-decalactone
Bansal, K. K., Kakde, D. D., Purdie, L., Irvine, D. J., Howdle, S. M., Mantovani, G., & Alexander, C. (2015) · Polymer Chemistry · doi:10.1039/c5py01203a · Cited by 65
Larrañaga, A., Aldazábal, P., Martín, F., & Sarasua, J.-R. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.08.021 · Cited by 65
Self-citationSome Properties ofPoly(3-hydroxybutyrate)-Poly(3-hydroxyvalerate) Blends
Gassner, F., & Owen, A. J. (1996) · Polymer International · Cited by 65
Study of biodegradability of poly(?-valerolactone-co-L-lactide)s
Nakayama, A., Kawasaki, N., Maeda, Y., Arvanitoyannis, I., Aiba, S., & Yamamoto, N. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19971024)66:4<741::aid-app14>3.0.co;2-u · Cited by 65
Kajiyama, T., Kobayashi, H., Taguchi, T., Kataoka, K., & Tanaka, J. (2003) · Biomacromolecules · doi:10.1021/bm0342990 · Cited by 64
Yang, J., Tian, W., Li, Q., Li, Y., & 曹阿民 (2004) · Biomacromolecules · doi:10.1021/bm049705+ · Cited by 64
Lizundia, E., Sarasua, J.-R., D'Angelo, F., Orlacchio, A., Martino, S., Kenny, J. M., & Armentano, I. (2012) · Macromolecular Bioscience · doi:10.1002/mabi.201200008 · Cited by 64
Self-citationWang, Y., Chung, A., & Chen, G. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601017 · Cited by 64
Nguyen, D. N., Raghavan, S. S., TASHIMA, L. M., Lin, E. C., Fredette, S. J., Langer, R., & Wang, C. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.03.011 · Cited by 63
Biodegradation of poly(ε-caprolactone) (PCL) by a new Penicillium oxalicum strain DSYD05-1
Li, F., Yu, D., Lin, X., Liu, D., Xia, H., & Chen, S. (2012) · World Journal of Microbiology and Biotechnology · doi:10.1007/s11274-012-1103-5 · Cited by 63
Gioia, C., Banella, M. B., Marchese, P., Vannini, M., Colonna, M., & Celli, A. (2016) · Polymer Chemistry · doi:10.1039/c6py00908e · Cited by 63
Debuissy, T., Sangwan, P., Pollet, É., & Avérous, L. (2017) · Polymer · doi:10.1016/j.polymer.2017.06.045 · Cited by 63
Degradation of aliphatic–aromatic copolyesters by bacteria that can degrade aliphatic polyesters
Nakajima‐Kambe, T., 市橋, 文., Matsuzoe, R., et al. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.08.006 · Cited by 62
Mao, H., Liu, H., Gao, Z., Su, T., & Wang, Z. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.01.025 · Cited by 62
Gautier, E., Fuertès, P., Cassagnau, P., Pascault, J., & Fleury, É. (2009) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.23253 · Cited by 62
TOXICITY AND BIODEGRADATION OF PRODUCTS FROM POLYESTER HYDROLYSIS
Kim, M.-N., Lee, B.-Y., Lee, I., Lee, H.-S., & Yoon, J. (2001) · Journal of Environmental Science and Health Part A · doi:10.1081/ese-100103475 · Cited by 61
Poly(hydroxyalkanoate) Elastomers and Their Graphene Nanocomposites
Barrett, J. S. F., Abdala, A. A., & Srienc, F. (2014) · Macromolecules · doi:10.1021/ma500022x · Cited by 61
Olejniczak, J., Chan, M., & Almutairi, A. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00455 · Cited by 60
Thompson, D. E., Agrawal, C. M., & Athanasiou, K. A. (1996) · Tissue Engineering · doi:10.1089/ten.1996.2.61 · Cited by 59
Lizundia, E., Ruiz‐Rubio, L., Vilas‐Vilela, J. L., & León, L. M. (2016) · RSC Advances · doi:10.1039/c5ra24604k · Cited by 57
Self-citationLei, L., Ding, T., Shi, R., et al. (2007) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2006.12.004 · Cited by 56
Yu, Z., Zhou, J., Cao, F., Wen, B., Zhu, X., & Wei, P. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39344 · Cited by 56
Isolation of bacteria degrading poly(butylene succinate-co-butylene adipate) and their lip A gene
Lee, S., & Kim, M.-N. (2010) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2010.01.002 · Cited by 56
An electrospun polydioxanone patch for the localisation of biological therapies during tendon repair
Hakimi, O., Murphy, R., Stachewicz, U., Hislop, S., & Carr, A. (2012) · European Cells and Materials · doi:10.22203/ecm.v024a25 · Cited by 55
Degradation of poly(tetramethylene succinate) by thermophilic actinomycetes
Jarerat, A., & Tokiwa, Y. (2001) · Biotechnology Letters · doi:10.1023/a:1010314316103 · Cited by 55
Chrissafis, K., Paraskevopoulos, K. M., Papageorgiou, G. Z., & Bikiaris, D. Ν. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.05.001 · Cited by 54
Gangoiti, J., dos Santos, M. M. O., Prieto, M., de la Mata, I., Serra, J. L., & Llama, M. J. (2012) · Applied and Environmental Microbiology · doi:10.1128/aem.01707-12 · Cited by 54
Vey, E., Rodger, C., Meehan, L., Booth, J., Claybourn, M., Miller, A. F., & Saiani, A. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.12.010 · Cited by 52
Nottelet, B., Tommaso, C. D., Mondon, K., Gurny, R., & Möller, M. (2010) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.24100 · Cited by 52
Corrales, T., Larraza, I., Catalina, F., Portolés, M. T., Ramírez‐Santillán, C., Matesanz, M. C., & Abrusci, C. (2012) · Biomacromolecules · doi:10.1021/bm301537g · Cited by 51
Gualandi, C., Soccio, M., Govoni, M., Valente, S., Lotti, N., Munari, A., Giordano, E., Pasquinelli, G., & Focarete, M. L. (2012) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911512440536 · Cited by 49
Grigoriadou, I., Nianias, N., Hoppe, A., Terzopoulou, Z. N., Bikiaris, D. Ν., Will, J., Hum, J., Roether, J. A., Detsch, R., & Boccaccini, A. R. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.12.015 · Cited by 46
Morales‐Huerta, J. C., de Ilarduya, A. M., & Muñoz‐Guerra, S. (2017) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.28895 · Cited by 46
Li, M., Chen, X., Che, X., Zhang, H. M., Wu, L., Du, H., & Chen, G. (2018) · Metabolic Engineering · doi:10.1016/j.ymben.2018.12.007 · Cited by 46
Fernández, J., Larrañaga, A., Etxeberria, A., Wang, W., & Sarasua, J. R. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35036 · Cited by 45
Self-citationMartínez‐Barbosa, M. E., Cammas‐Marion, S., Appel, M., & Ponchel, G. (2003) · Biomacromolecules · doi:10.1021/bm0300608 · Cited by 45
Guo, W., Kang, H., Chen, Y., Guo, B., & Zhang, L. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300828u · Cited by 45
Zheng, M. Y., Zang, X., Wang, G. X., Wang, P. L., Lu, B., & Ji, J. H. (2017) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2017.59 · Cited by 45
Towards developing surface eroding poly(α-hydroxy acids)
Xu, X.-J., Sy, J. C., & Shastri, V. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.006 · Cited by 44
Wu, F., Huang, C.-L., Zeng, J., Li, S., & Wang, Y. (2014) · Polymer · doi:10.1016/j.polymer.2014.05.059 · Cited by 44
Fernández, J., Etxeberria, A., & Sarasua, J.-R. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.09.001 · Cited by 44
Vallejo‐Giraldo, C., Pugliese, E., Larrañaga, A., Fernández, M., Britton, J., Trotier, A., Tadayyon, G., Kelly, A., Rago, I., Sarasua, J.-R., et al. (2016) · Nanomedicine · doi:10.2217/nnm-2016-0075 · Cited by 43
Self-citationSangroniz, A., González, A., Martin, L., Irusta, L., Iriarte, M., & Etxeberria, A. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.01.023 · Cited by 43
Papageorgiou, G. Z., Achilias, D. S., & Bikiaris, D. Ν. (2008) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200800441 · Cited by 42
Degradation of poly(?-malic acid)-monitoring of oligomers formation by aqueous SEC and HPCE
Braud, C., & Vert, M. (1992) · Polymer Bulletin · doi:10.1007/bf00558054 · Cited by 42
Huang, Y., Chen, F., Pan, Y., Chen, C., Jiang, L., & Dan, Y. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.09.044 · Cited by 42
Wang, X., Liu, S., Wang, Q., Li, J., & Wang, G. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.09.051 · Cited by 42
Feng, L., Wang, Y., Inagawa, Y., Kasuya, K., Saito, T., Doi, Y., & Inoue, Y. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.09.016 · Cited by 41
Fernández, J., Etxeberria, A., Varga, A. L., & Sarasua, J.-R. (2015) · Polymer · doi:10.1016/j.polymer.2015.11.001 · Cited by 39
Zignani, M., Merkli, A., Sintzel, M. B., Bernatchez, S. F., Kloeti, W., Heller, J., Tabatabay, C., & Gurny, R. (1997) · Journal of Controlled Release · doi:10.1016/s0168-3659(97)00050-3 · Cited by 39
Kakde, D., Taresco, V., Bansal, K. K., Magennis, E. P., Howdle, S. M., Mantovani, G., Irvine, D. J., & Alexander, C. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb01839d · Cited by 39
Impact of ZnO nanoparticle morphology on relaxation and transport properties of PLA nanocomposites
Lizundia, E., Penayo, C., Guinault, A., Vilas‐Vilela, J. L., & Domenek, S. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.02.009 · Cited by 38
Self-citationObarzanek-Fojt, M., Elbs‐Glatz, Y., Lizundia, E., Diener, L., Sarasua, J.-R., & Bruinink, A. (2014) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2013.12.012 · Cited by 37
Self-citationTappel, R. C., Kucharski, J. M., Mastroianni, J. M., Stipanovic, A. J., & Nomura, C. T. (2012) · Biomacromolecules · doi:10.1021/bm301043t · Cited by 37
Girdthep, S., Worajittiphon, P., Leejarkpai, T., Molloy, R., & Punyodom, W. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.07.020 · Cited by 37
Hydrolytic degradation of nonoriented poly(β‐propiolactone)
Mathisen, T., Lewis, M., & Albertsson, A. (1991) · Journal of Applied Polymer Science · doi:10.1002/app.1991.070420829 · Cited by 36
Khakbaz, M., Hejazi, I., Seyfi, J., Jafari, S. H., Khonakdar, H. A., & Davachi, S. M. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.09.101 · Cited by 35
Peng, S., Wu, B., Wu, L., Li, B., & Dúbois, P. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44674 · Cited by 35
Lips, P. A. M., van Luyn, M. J. A., Chiellini, E., Brouwer, L. A., Velthoen, I. W., Dijkstra, P. J., & Feijén, J. (2005) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30530 · Cited by 34
Song, Q., Xia, Y., Hu, S., Zhao, J., & Zhang, G. (2016) · Polymer · doi:10.1016/j.polymer.2016.09.026 · Cited by 34
A multi-scale method for modeling degradation of bioresorbable polyesters
Zhang, T., Zhou, S., Xiaohao, G., Yang, Z., Leran, S., & Zhang, D. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.12.046 · Cited by 34
Papageorgiou, G. Z., Bikiaris, D. Ν., Achilias, D. S., Papastergiadis, E., & Docoslis, A. (2010) · Thermochimica Acta · doi:10.1016/j.tca.2010.12.010 · Cited by 33
Furuhashi, Y., Iwata, T., Kimura, Y., & Doi, Y. (2003) · Macromolecular Bioscience · doi:10.1002/mabi.200350020 · Cited by 33
Novotný, Č., Erbanová, P., Sezimová, H., Malachová, K., Rybková, Z., Malinová, L., Prokopová, I., & Brožek, J. (2014) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2014.10.010 · Cited by 33
Biodegradable coronary scaffolds: their future and clinical and technological challenges
Hytönen, J. P., Taavitsainen, J., Tarvainen, S., & Ylä‐Herttuala, S. (2018) · Cardiovascular Research · doi:10.1093/cvr/cvy097 · Cited by 33
Fritz, J., Sandhofer, M., Stacher, C., & Braun, R. (2003) · Macromolecular Symposia · doi:10.1002/masy.200350734 · Cited by 30
Chrissafis, K., Paraskevopoulos, K. M., & Bikiaris, D. Ν. (2010) · Thermochimica Acta · doi:10.1016/j.tca.2010.03.026 · Cited by 30
Larrañaga, A., Fernández, J., Vega, A., et al. (2014) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2014.07.020 · Cited by 30
Self-citationIn vitro degradation of poly(lactide/δ-valerolactone) copolymers
Fernández, J., Etxeberria, A., & Sarasua, J.-R. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.12.019 · Cited by 29
Marois, Y., Zhang, Z., Vert, M., Deng, X., Lenz, R. W., & Guidoin, R. (1999) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856299x00225 · Cited by 28
Hydrolytic degradation of melt‐extruded fibers from poly(β‐propiolactone)
Mathisen, T., & Albertsson, A. (1990) · Journal of Applied Polymer Science · doi:10.1002/app.1990.070390310 · Cited by 28
Qiu, S., Su, Z., & Qiu, Z. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02654 · Cited by 28
Tuneable hydrolytic degradation of poly(l-lactide) scaffolds triggered by ZnO nanoparticles
Lizundia, E., Mateos, P., & Vilas‐Vilela, J. L. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.02.104 · Cited by 28
Self-citationInsight into industrial PLA aging process by complementary use of rheology, HPLC, and MALDI
Dopico, S., Ares‐Pernas, A., Otero‐Canabal, J., Castro-López, M. M., Vilariño, J. M. L., González-Rodríguez, M. V., & Abad, M. J. (2013) · Polymers for Advanced Technologies · doi:10.1002/pat.3136 · Cited by 27
Understanding the controlled biodegradation of polymers using nanoclays
Kumar, S., & Maiti, P. (2015) · Polymer · doi:10.1016/j.polymer.2015.08.044 · Cited by 26
Busatto, C. A., Pesoa, J., Helbling, I. M., Luna, J. A., & Estenoz, D. A. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45464 · Cited by 26
Fernández, J., Larrañaga, A., Etxeberria, A., & Sarasua, J.-R. (2016) · RSC Advances · doi:10.1039/c6ra01065b · Cited by 25
Self-citationSynthesis and properties of novel poly(ethylene succinate-co-decamethylene succinate) copolymers
Li, X., & Qiu, Z. (2015) · RSC Advances · doi:10.1039/c5ra23585e · Cited by 25
Thermal properties and crystallization kinetics of poly(butylene suberate)
Cui, Z., & Qiu, Z. (2015) · Polymer · doi:10.1016/j.polymer.2015.04.069 · Cited by 24
Thermophysical properties of polypentadecanolactone
Skoglund, P., & Fransson, Å. (1998) · Polymer · doi:10.1016/s0032-3861(97)00473-4 · Cited by 24
Fernández, J., Etxeberria, A., & Sarasua, J.-R. (2015) · RSC Advances · doi:10.1039/c5ra23404b · Cited by 24
Fernández, J., Larrañaga, A., Etxeberria, A., & Sarasua, J.-R. (2014) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2014.03.013 · Cited by 23
Self-citationLarrañaga, A., Diamanti, E., Rubio, E., Palomares, T., Alonso-Varona, A., Aldazabal, P., Martin, F. J., & Sarasua, J. R. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.05.061 · Cited by 21
Self-citationPapageorgiou, G. Z., Nanaki, S. G., & Bikiaris, D. Ν. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.12.006 · Cited by 21
Crystallization and melting of biodegradable poly(propylene suberate)
Papageorgiou, G. Z., & Panayiotou, C. G. (2011) · Thermochimica Acta · doi:10.1016/j.tca.2011.05.023 · Cited by 21
Synthesis and Enzymatic Degradation of Soft Aliphatic Polyesters
Buchholz, V., Agarwal, S., & Greiner, A. (2015) · Macromolecular Bioscience · doi:10.1002/mabi.201500279 · Cited by 20
Physical Aging in Poly(L‐lactide) and its Multi‐Wall Carbon Nanotube Nanocomposites
Lizundia, E., & Sarasua, J.-R. (2012) · Macromolecular Symposia · doi:10.1002/masy.201251120 · Cited by 20
Self-citationBusatto, C. A., Berkenwald, E., Mariano, N., Casís, N., Luna, J. A., & Estenoz, D. A. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.12.018 · Cited by 20
Zhang, M., Ma, X.-N., Li, C., Zhao, D. L., Xing, Y., & Qiu, J. (2017) · RSC Advances · doi:10.1039/c7ra05553f · Cited by 19
Papageorgiou, G. Z., Bikiaris, D. Ν., Achilias, D. S., & Karagiannidis, N. (2010) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201000491 · Cited by 18
Coulembier, O., Degée, P., Guérin, P., & Dúbois, P. (2003) · Langmuir · doi:10.1021/la030151q · Cited by 17
Gleadall, A., Pan, J., & Kruft, M.-A. B. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.07.010 · Cited by 16
de la Cruz, L. I. S., Medellín‐Rodríguez, F. J., Velasco‐Santos, C., Martínez‐Hernández, A. L., & Gutiérrez-Sánchez, M. (2016) · Journal of Polymer Research · doi:10.1007/s10965-016-1002-9 · Cited by 16
Forecasting linear aliphatic copolyester degradation through modular block design
Arias, V., Olsén, P., Odelius, K., Höglund, A., & Albertsson, A. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.05.021 · Cited by 15
Synthesis and Biodegradation of Poly(l-lactide-co-β-propiolactone)
Nakayama, Y., Aihara, K., Cai, Z., Shiono, T., & Tsutsumi, C. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18061312 · Cited by 15
Alternating melting points, heats and entropies of fusion of linear aliphatic polyesters
Ueberretter, K., Karl, V., & Altmeyer, A. (1978) · European Polymer Journal · doi:10.1016/0014-3057(78)90165-9 · Cited by 13
Heidarzadeh, N., Rafizadeh, M., Taromi, F. A., del Valle, L. J., Franco, L., & Puiggalí, J. (2016) · Polymers · doi:10.3390/polym8070253 · Cited by 13
Ni, N., Ji, J., Chen, S., Zhang, D., Wang, Z., Shen, B., Guo, C., Zhang, Y., Wang, S., Fan, X., et al. (2016) · Macromolecular Bioscience · doi:10.1002/mabi.201600058 · Cited by 12
Biobased & Biodegradable Plastics: Rationale, Drivers, and Technology Exemplars
Narayan, R. (2012) · ACS symposium series · doi:10.1021/bk-2012-1114.ch002 · Cited by 11
Thermal, optical and structural properties of blocks and blends of PLA and P2HEB
Makwana, V. A., Lizundia, E., Larrañaga, A., Vilas‐Vilela, J. L., & Shaver, M. P. (2018) · Green Materials · doi:10.1680/jgrma.18.00006 · Cited by 11
Self-citationGleadall, A., Pan, J., Ding, L., Kruft, M.-A. B., & Curcó, D. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.07.008 · Cited by 10
Multiscale modelling for the heterogeneous strength of biodegradable polyesters
Zhang, T., Jin, G., Han, X., Gao, Y., Zeng, Q., Hou, B., & Zhang, D. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.10.018 · Cited by 10
Shi, X., & Qiu, Z. (2015) · RSC Advances · doi:10.1039/c5ra16801e · Cited by 8
Grivalský, T., Rychlý, J., Rychlá, L., Bučková, M., Kraková, L., Puškárová, A., Orovčík, Ľ., & Pangallo, D. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-0980-y · Cited by 8
Larrañaga, A., Pompanon, F., Gruffat, N., Palomares, T., Alonso‐Varona, A., Varga, A. L., Fernández, M., Biggs, M. J. P., & Sarasua, J.-R. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.10.050 · Cited by 7
Self-citationHorton, V. L., Blegen, P. E., Barrows, T. H., Quarfoth, G. J., Gibson, S. J., Johnson, J. D., & McQuinn, R. L. (1990) · Springer eBooks · doi:10.1007/978-1-4899-0768-4_27 · Cited by 6
De, Y. (2007) · 天津大学学报:英文版 · Cited by 2
Cited by
Bio-based polyesters: Recent progress and future prospects
Zhang, Q., Song, M., Xu, Y., Wang, W., Wang, Z., & Zhang, L. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101430 · Cited by 433
Liu, L., Xu, M., Ye, Y., & Zhang, B. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.151312 · Cited by 419
Recyclable and (Bio)degradable Polyesters in a Circular Plastics Economy
Shi, C., Quinn, E. C., Diment, W. T., & Chen, E. Y.-X. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00848 · Cited by 402
Advances in Natural Biopolymer‐Based Electrolytes and Separators for Battery Applications
Lizundia, E., & Kundu, D. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202005646 · Cited by 295
Self-citationBiodegradation of Biodegradable Polymers in Mesophilic Aerobic Environments
Bher, A., Mayekar, P. C., Auras, R. A., & Schvezov, C. E. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms232012165 · Cited by 254
Metadata
- Authors
- Larrañaga, A., & Lizundia, E.
- Venue
- European Polymer Journal
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 121
- Pages
- 109296
- ISSN
- 0014-3057 (ISSN-L)
- OpenAlex
- W2980083665
- Cited by
- 257
- References
- 363
- FWCI
- 5.43
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.