Characterization of pyrolysis products from slow pyrolysis of live and dead vegetation native to the southern United States
Open accessThe DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Prescribed (i.e., controlled) burning is a common practice used in many vegetation types in the world to accomplish a wide range of land management objectives including wildfire risk reduction, wildlife habitat improvement, forest regeneration, and land clearing. To properly apply controlled fire and reduce unwanted fire behavior, an improved understanding of fundamental processes related to combustion of live and dead vegetation is needed. Since the combustion process starts with pyrolysis, there is a need for more data and better models of pyrolysis of live and dead fuels. In this study, slow pyrolysis experiments were carried out in a pyrolyzer apparatus under nitrogen atmosphere in two groups of experiments. In the first group, the effects of temperature (400–800 °C), a slow heating rate (5–30 °C min−1), and carrier gas flow rate (50–350 ml min−1) on yields of tar and light gas obtained from pyrolysis of dead longleaf pine litter were investigated to find the optimum condition which results in the maximum tar yield. The results showed that the highest tar yield was obtained at a temperature of 500 °C, heating rate of 30 °C min−1, and sweep gas flow rate of 100 ml min−1. In the second group of experiments, 14 plant species (live and dead) native to forests in the southern United States, were heated in the pyrolyzer apparatus at the optimum condition. A gas chromatograph equipped with a mass spectrometer (GC–MS) and a gas chromatograph equipped with a thermal conductivity detector (GC-TCD) were used to study the speciation of tar and light gases, respectively. The results showed that the tar composition is dominated by oxygenated aromatic compounds consisting mainly of phenols. The light gas analysis showed that CO and CO2 were the dominant light gas species for all plant samples on a dry wt% basis, followed by CH4 and H2.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155 · cited 2×
“The main gas products from pyrolysis are formed from specific functional groups [9].”
BackgroundReview of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Biofuels Production through Biomass Pyrolysis—A Technological Review
Jahirul, M., Rasul, M., Chowdhury, A., & Ashwath, N. (2012) · Energies · doi:10.3390/en5124952 · Cited by 1,427
A review of prescribed burning effectiveness in fire hazard reduction.
Fernandes, P. M., & Botelho, H. S. (2003) · International Journal of Wildland Fire · doi:10.1071/wf02042 · Cited by 718
A review on operating parameters for optimum liquid oil yield in biomass pyrolysis
Akhtar, J., & Saidina Amin, N. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.033 · Cited by 692
Biomass pyrolysis-a review of modelling, process parameters and catalytic studies
Sharma, A., Pareek, V., & Zhang, D. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.193 · Cited by 675
A review on bio-oil production from biomass by using pyrolysis method
Isahak, W. N. R. W., Hisham, M. W. M., Yarmo, M. A., & Yun Hin, T.-Y. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.039 · Cited by 624 · cited 2×
“Tar is a complex mixture consisting of a variety of organic components from different chemical groups such as aromatics, hydrocarbons, aliphatic compounds, and oxygenated compounds [24,25].”
BackgroundCharacterization of bio-oil, syn-gas and bio-char from switchgrass pyrolysis at various temperatures
Imam, T., & Capareda, S. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.11.010 · Cited by 345 · cited 1×
“Tar is a complex mixture consisting of a variety of organic components from different chemical groups such as aromatics, hydrocarbons, aliphatic compounds, and oxygenated compounds [24,25].”
BackgroundBio-oil production from pyrolysis of corncob (Zea mays L.)
Demiral, İ., Eryazıcı, A., & Şensöz, S. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.10.045 · Cited by 152
Cited by
Hoang, A. T., Ong, H. C., Fattah, I. M. R., Chong, C. T., Cheng, C. K., Sakthivel, R., & Ok, Y. S. (2021) · Fuel Processing Technology · doi:10.1016/j.fuproc.2021.106997 · Cited by 512
Ghodake, G. S., Shinde, S. K., Kadam, A. A., Saratale, R. G., Saratale, G. D., Kumar, M., Palem, R. R., AL-Shwaiman, H. A., Elgorban, A. M., Syed, A., et al. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126645 · Cited by 414
Chatterjee, R., Sajjadi, B., Chen, W.-Y., Mattern, D. L., Hammer, N., Raman, V., & Dorris, A. (2020) · Frontiers in Energy Research · doi:10.3389/fenrg.2020.00085 · Cited by 385
Bhoi, P. R., Ouedraogo, A. S., Soloiu, V., & Quirino, R. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109676 · Cited by 292
Biomass-derived Biochar: From Production to Application in Removing Heavy Metal-Contaminated Water
Chen, W.-H., Hoang, A. T., Nižetić, S., Pandey, A., Cheng, C. K., Luque, R., Ong, H. C., Thomas, S., & Nguyen, X. P. (2022) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.02.061 · Cited by 201
Metadata
- Authors
- Amini, E., Safdari, M.-S., DeYoung, J. T., Weise, D. R., & Fletcher, T. H.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 235
- Pages
- 1475-1491
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2799299111
- Cited by
- 108
- References
- 9
- FWCI
- 6.04
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Characterization of pyrolysis products from slow pyrolysis of live and dead vegetation native to the southern United States. https://app.cochat.ai/papers/10.1016/j.fuel.2018.08.112
- The paper
- Amini, E., Safdari, M.-S., DeYoung, J. T., Weise, D. R., & Fletcher, T. H. (2019). Characterization of pyrolysis products from slow pyrolysis of live and dead vegetation native to the southern United States. Fuel. https://doi.org/10.1016/j.fuel.2018.08.112
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.