Biomass ash stabilized MgO adsorbents for CO2 capture application
The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
Abstract Supported MgO adsorbents were prepared from the calcination of MgCl2·6H2O preloaded on several biomass wastes including sugarcane bagasse, coffee grounds, rice husk, and saw dust. CO2 adsorption behaviors of the adsorbents with different supports and MgO loadings were investigated using a fixed-bed reactor. The modified Avrami fractional kinetic model was adopted to correlate their CO2 uptakes to evaluate the CO2 adsorption kinetic performance. Amongst the prepared MgO adsorbents, the rice husk ash supported sample (MgO-RHA) featured high CO2 adsorption capacity, due to the good textural properties, nano-crystallization of MgO particles, the uniform dispersion of active components and the enriched surface basicity. CO2 uptakes of MgO-RHA increased first and then decreased with the increasing MgO loading. CO2 adsorption kinetic would be hampered by higher MgO contents because of the increased diffusion resistance and decreased MgO utilization. The adsorbent with 20 wt% MgO loading exhibited the highest CO2 uptake of 4.56 mmol CO2/g. Besides, the desired adsorbent presented good working stability with 7.68% loss-in-capacity in 10 repeated cycles. Recycling waste MgCl2·6H2O and biomass residues to synthesize CO2 adsorbents provides remarkable economic and environmental implications, from the prospective of CO2 emission mitigation and waste management.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
Self-citationSustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Wang, R., Wang, P., Yan, X., Lang, J., Peng, C., & Xue, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am302077c · Cited by 475
Carbon dioxide capture using biochar produced from sugarcane bagasse and hickory wood
Creamer, A. E., Gao, B., & Zhang, M. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.03.105 · Cited by 432
Valorisation of spent coffee grounds as CO2 adsorbents for postcombustion capture applications
Plaza, M. G., González, A. S., Pevida, C., Pis, J. J., & Rubiera, F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.05.028 · Cited by 313
Liu, W.-J., Jiang, H., Tian, K., Ding, Y.-W., & Yu, H.-Q. (2013) · Environmental Science & Technology · doi:10.1021/es401286p · Cited by 276
Raganati, F., Alfe, M., Gargiulo, V., Chirone, R., & Ammendola, P. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.04.165 · Cited by 209
Activated carbons prepared from peanut shell and sunflower seed shell for high CO2 adsorption
Deng, S., Hu, B., Chen, T., Wang, B., Huang, J., Wang, Y., & Yu, G. (2015) · Adsorption · doi:10.1007/s10450-015-9655-y · Cited by 159
Cited by
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Shafawi, A. N., Mohamed, A. R., Lahijani, P., & Mohammadi, M. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.106869 · Cited by 187
Zubbri, N. A., Mohamed, A. R., Lahijani, P., & Mohammadi, M. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.105074 · Cited by 106
Enhancement of CO2 adsorption on biochar sorbent modified by metal incorporation
Zubbri, N. A., Mohamed, A. R., Kamiuchi, N., & Mohammadi, M. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-07734-3 · Cited by 92
Zhang, S., Wang, J., Zhu, S., Liu, X., Xiong, Y., & Zhang, H. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.104962 · Cited by 53
Metadata
- Authors
- Guo, Y., Tan, C., Sun, J., Li, W., Zhang, J., & Zhao, C.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 259
- Pages
- 116298
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2975995517
- Cited by
- 99
- References
- 8
- FWCI
- 5.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Biomass ash stabilized MgO adsorbents for CO2 capture application. https://app.cochat.ai/papers/10.1016/j.fuel.2019.116298
- The paper
- Guo, Y., Tan, C., Sun, J., Li, W., Zhang, J., & Zhao, C. (2020). Biomass ash stabilized MgO adsorbents for CO2 capture application. Fuel. https://doi.org/10.1016/j.fuel.2019.116298
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.