Influence of activation conditions on textural properties and performance of activated biochars for pyrolysis vapors upgrading
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The main aim of the present study is to provide a comprehensive assessment of the effects of process activation conditions on the textural properties of the resulting activated carbons, which were produced from wheat straw-derived biochar through chemical activation (with K2CO3 at different pressures and mass impregnation ratios) and physical activation (with CO2 at different temperatures and pressures). For chemically activated biochars, it was found that specific surface area and pore size distribution were both only positively affected by increasing the carbonate loading. However, physically activated biochars produced at the highest pressure and lowest temperature (1.0 MPa and 700 °C) had the highest surface areas and widest pore size distributions. The materials with the most appropriate textural properties were then tested as catalysts for steam and dry reforming of the aqueous phase of pyrolysis oil. The best catalytic performance (a total gas yield of 74% and a selectivity toward H2 of almost 40%) was observed for a physically activated biochar. This good performance was ascribed to the high availability of K0 on the catalyst surface, which could effectively promote the reactions involved in the upgrading process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Development of biochar-based functional materials: toward a sustainable platform carbon material
Liu, W.-J., Jiang, H., & Yu, H.-Q. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00195 · Cited by 1,754
Adsorption of CO2 from flue gas by novel seaweed-based KOH-activated porous biochars
Ding, S., & Liu, Y. (2020) · Fuel · doi:10.1016/j.fuel.2019.116382 · Cited by 311
Cited by
Model for the physical activation of biochar to activated carbon
Colomba, A., Berruti, F., & Briens, C. (2022) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2022.105769 · Cited by 82
Application of Biochar-Based Materials for Effective Pollutant Removal in Wastewater Treatment
Han, M., Liu, Z., Huang, S., Zhang, H., Yang, H., Liu, Y., Zhang, K., & Zeng, Y. (2024) · Nanomaterials · doi:10.3390/nano14231933 · Cited by 37
Zhou, Y., Zhang, X., Deng, J., Li, C., Sun, K., Luo, X., & Yuan, S. (2023) · Journal of Environmental Management · doi:10.1016/j.jenvman.2023.119317 · Cited by 25
Metadata
- Authors
- Di Stasi, C., Greco, G., Canevesi, R. L. S., Izquierdo, M. T., Fierro, V., Celzard, A., González, B., & Manyà, J. J.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 289
- Pages
- 119759
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W3110124825
- Cited by
- 46
- References
- 2
- FWCI
- 1.62
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.