The DOI matches its Crossref record; 195 of the 195 references it cites were found in a registry or an index.
Progress on design and development of polymer electrolyte membrane fuel cell systems for vehicle applications: A review
Abstract
Abstract Due to its merit of rapid start-up, lower pollution and high energy conversion efficiency, polymer electrolyte membrane fuel cell (PEMFC) system has been considered as one of the most promising propulsion system for electric vehicles. Although the development of PEMFC system has been experienced rapid growth for several decades, many challenges still need to be overcome for promoting commercialize fuel cell technology. In order to understand the design concept of PEMFC system and update the development status of fuel cell system for electric vehicle, as well as help fuel cell system developers or electric vehicle manufacturers to improve the performance and durability of fuel cell electric vehicles, the up-to-date technical targets such as power density, operation temperature, dynamic response and lifetime for PEMFC systems in different countries have been summarized and compared in this review. Furthermore, from the aspects of hydrogen management and air management and major degradation mechanisms under various operation conditions, the design status of the system configuration in fuel cell has also been analyzed in detail. Finally, according to the design and intended operation the mitigation strategies have also been proposed to promote the development of PEMFC system for electric vehicle applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Scientific Aspects of Polymer Electrolyte Fuel Cell Durability and Degradation
Borup, R., Meyers, J., Pivovar, B., Kim, Y. S., Mukundan, R., Garland, N., Myers, D., Wilson, M., Garzon, F., Wood, D., et al. (2007) · Chemical Reviews · doi:10.1021/cr050182l · Cited by 3,402
A Reverse-Current Decay Mechanism for Fuel Cells
Reiser, C. A., Bregoli, L., Patterson, T. W., Yi, J. S., Yang, J. D., Perry, M. L., & Jarvi, T. D. (2005) · Electrochemical and Solid-State Letters · doi:10.1149/1.1896466 · Cited by 976
A review of the main parameters influencing long-term performance and durability of PEM fuel cells
Schmittinger, W., & Vahidi, A. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.01.070 · Cited by 819
Carbon support oxidation in PEM fuel cell cathodes
Maass, S., Finsterwalder, F., Frank, G., Hartmann, R., & Merten, C. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.08.053 · Cited by 740
A review of platinum-based catalyst layer degradation in proton exchange membrane fuel cells
Zhang, S., Yuan, X.-Z., Hin, J. N. C., Wang, H., Friedrich, K. A., & Schulze, M. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.073 · Cited by 661
Pei, P., & Chen, H. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.03.048 · Cited by 616
A quick evaluating method for automotive fuel cell lifetime
PEI, P., CHANG, Q., & TANG, T. (2008) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.04.048 · Cited by 518
Stephens, I. E. L., Rossmeisl, J., & Chorkendorff, I. (2016) · Science · doi:10.1126/science.aal3303 · Cited by 505
PEM fuel cell cathode carbon corrosion due to the formation of air/fuel boundary at the anode
Tang, H., Qi, Z., Ramani, M., & Elter, J. F. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.10.059 · Cited by 488
A review of polymer–nanocomposite electrolyte membranes for fuel cell application
Kim, D. J., Jo, M. J., & Nam, S. Y. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.04.030 · Cited by 484
A model predicting transient responses of proton exchange membrane fuel cells
Amphlett, J. C., Mann, R. F., Peppley, B. A., Roberge, P. R., & Rodrigues, A. (1996) · Journal of Power Sources · doi:10.1016/s0378-7753(96)02360-9 · Cited by 458
Model of Carbon Corrosion in PEM Fuel Cells
Meyers, J. P., & Darling, R. M. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2203811 · Cited by 430
A review on water balance in the membrane electrode assembly of proton exchange membrane fuel cells
Dai, W., Wang, H., Yuan, X.-Z., Martin, J. J., Yang, D., Qiao, J., & Ma, J. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.09.017 · Cited by 420
Yan, Q., Toghiani, H., & Causey, H. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.077 · Cited by 391
A review of polymer electrolyte membrane fuel cell durability test protocols
Yuan, X.-Z., Li, H., Zhang, S., Martin, J., & Wang, H. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.07.082 · Cited by 354
Park, J., Oh, H., Ha, T., Lee, Y. I., & Min, K. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.06.068 · Cited by 331
Mechanical response of fuel cell membranes subjected to a hygro-thermal cycle
Kusoglu, A., Karlsson, A. M., Santare, M. H., Cleghorn, S., & Johnson, W. B. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.05.020 · Cited by 323
Yu, Y., Li, H., Wang, H., Yuan, X.-Z., Wang, G., & Pan, M. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.059 · Cited by 313
Self-citationDevelopment of Compact and High-Performance Fuel Cell Stack
Konno, N., Mizuno, S., Nakaji, H., & Ishikawa, Y. (2015) · SAE International Journal of Alternative Powertrains · doi:10.4271/2015-01-1175 · Cited by 291
Jiao, K., & Li, X. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.06.072 · Cited by 289
Ceraolo, M., Miulli, C., & Pozio, A. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00565-7 · Cited by 246
Freire, T. J. P., & Gonzalez, E. R. (2001) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(01)00364-3 · Cited by 241
A review of polymer electrolyte membrane fuel cell stack testing
Miller, H. A., & Bazylak, A. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.072 · Cited by 229
Damage to the Cathode Catalyst of a PEM Fuel Cell Caused by Localized Fuel Starvation
Patterson, T. W., & Darling, R. M. (2006) · Electrochemical and Solid-State Letters · doi:10.1149/1.2167930 · Cited by 226
Liu, D., & Case, S. W. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.07.007 · Cited by 218
BAO, C., OUYANG, M., & YI, B. (2006) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2006.02.031 · Cited by 212
Dynamic Thermal Model of Li-Ion Battery for Predictive Behavior in Hybrid and Fuel Cell Vehicles
Park, C., & Jaura, A. K. (2003) · SAE Technical Paper Series · doi:10.4271/2003-01-2286 · Cited by 205
Fuel cell systems for transportation: Status and trends
Ahluwalia, R. K., & Wang, X. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.10.026 · Cited by 190
Self-citationDynamic modelling and simulation of a polymer membrane fuel cell including mass transport limitation
WOHR, M. (1998) · International Journal of Hydrogen Energy · doi:10.1016/s0360-3199(97)00043-8 · Cited by 189
A review of hollow Pt-based nanocatalysts applied in proton exchange membrane fuel cells
Zhou, X., Gan, Y., Du, J., Tian, D., Zhang, R., Yang, C., & Dai, Z. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.062 · Cited by 165
Modeling and simulation of the dynamic behavior of a polymer electrolyte membrane fuel cell
Yerramalla, S., Davari, A., Feliachi, A., & Biswas, T. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00733-x · Cited by 162
Lapicque, F., Belhadj, M., Bonnet, C., Pauchet, J., & Thomas, Y. R. J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.10.037 · Cited by 162
Liang, D., Shen, Q., Hou, M., Shao, Z., & Yi, B. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.059 · Cited by 161
Ferreira, R. B., Falcão, D. S., Oliveira, V. B., & Pinto, A. M. F. R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.124 · Cited by 160
Optimization of purge cycle for dead-ended anode fuel cell operation
Chen, J., Siegel, J. B., Stefanopoulou, A. G., & Waldecker, J. R. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.02.022 · Cited by 159
New theoretical model for convergent nozzle ejector in the proton exchange membrane fuel cell system
Zhu, Y., & Li, Y. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.02.014 · Cited by 158
Tabe, Y., Saito, M., Fukui, K., & Chikahisa, T. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.052 · Cited by 156
Kim, J., Lee, J., & Tak, Y. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.03.039 · Cited by 156
Liu, Y., Lehnert, W., Janßen, H., Samsun, R. C., & Stolten, D. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.033 · Cited by 154
You, S., Zhao, Q., Zhang, J., Jiang, J., Wan, C., Du, M., & Zhao, S. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.07.063 · Cited by 153
Transient response of a unit proton-exchange membrane fuel cell under various operating conditions
Cho, J., Kim, H.-S., & Min, K. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.06.073 · Cited by 149
Jiao, K., & Li, X. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.07.102 · Cited by 142
Chen, B., Wang, J., Yang, T., Cai, Y., Zhang, C., Chan, S. H., Yu, Y., & Tu, Z. (2016) · Energy · doi:10.1016/j.energy.2016.03.045 · Cited by 135
Self-citationDegradation phenomena in PEM fuel cell with dead-ended anode
Matsuura, T., Chen, J., Siegel, J. B., & Stefanopoulou, A. G. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.06.096 · Cited by 132
Chen, D., Li, W., & Peng, H. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.02.055 · Cited by 130
Yin, Y. S., Fan, M., Jiao, K., Du, Q., & Qin, Y. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.09.024 · Cited by 130
Study on the processes of start-up and shutdown in proton exchange membrane fuel cells
Shen, Q., Hou, M., Liang, D. S., Zhou, Z., Li, X., Shao, Z., & Yi, B. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.075 · Cited by 129
Baik, K. D., & Kim, M. S. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.09.046 · Cited by 128
Cold start analysis of polymer electrolyte membrane fuel cells
Jiao, K., & Li, X. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.09.004 · Cited by 128
Evaluation of 5 kW proton exchange membrane fuel cell stack operated at 95 °C under ambient pressure
Tu, Z., Zhang, H., Luo, Z., Liu, J., Wan, Z., & Pan, M. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.08.081 · Cited by 125
Self-citationMetal foams application to enhance cooling of open cathode polymer electrolyte membrane fuel cells
Hossain, M. S., & Shabani, B. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.022 · Cited by 123
Hosseinzadeh, E., Rokni, M., Rabbani, A., & Mortensen, H. H. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.11.048 · Cited by 122
Lee, Y., Kim, B. S., & Kim, Y. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.07.010 · Cited by 117
Development of the Fuel Cell System in the Mirai FCV
Hasegawa, T., Imanishi, H., Nada, M., & Ikogi, Y. (2016) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2016-01-1185 · Cited by 116
Ye, D., & Zhan, Z. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.009 · Cited by 114
Ishigami, Y., Takada, K., Yano, H., Inukai, J., Uchida, M., Nagumo, Y., Hyakutake, T., Nishide, H., & Watanabe, M. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.092 · Cited by 113
Cold start characteristics of proton exchange membrane fuel cells
Jiao, K., Alaefour, I. E., Karimi, G., & Li, X. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.05.101 · Cited by 112
Nitrogen Front Evolution in Purged Polymer Electrolyte Membrane Fuel Cell with Dead-Ended Anode
Siegel, J. B., Bohac, S. V., Stefanopoulou, A. G., & Yeşilyurt, S. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3425743 · Cited by 105
Methekar, R. N., Prasad, V., & Gudi, R. D. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.11.047 · Cited by 101
Carbon Corrosion in PEM Fuel Cell Dead-Ended Anode Operations
Chen, J., Siegel, J. B., Matsuura, T., & Stefanopoulou, A. G. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3609770 · Cited by 101
Alink, R., Haußmann, J., Markötter, H., Schwager, M., Manke, I., & Gerteisen, D. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.085 · Cited by 99
Optimization study of purge cycle in proton exchange membrane fuel cell system
Nikiforow, K., Karimäki, H., Keränen, T., & Ihonen, J. K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.153 · Cited by 99
PARK, S., Choe, S.-Y., & CHOI, S. (2008) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.02.058 · Cited by 99
Jiao, K., Alaefour, I. E., Karimi, G., & Li, X. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.01.019 · Cited by 98
Zhou, Y., Luo, Y., Yu, S., & Jiao, K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.023 · Cited by 97
Qu, S., Li, X., Hou, M., Shao, Z., & Yi, B. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.06.080 · Cited by 94
Dillet, J., Spernjak, D., Lamibrac, A., Maranzana, G., Mukundan, R., Fairweather, J. D., Didierjean, S., Borup, R. L., & Lottin, O. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.141 · Cited by 93
Brightman, E., & Hinds, G. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.040 · Cited by 90
Luo, Y., Jiao, K., & Jia, B. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.05.050 · Cited by 89
Dynamic modeling of proton exchange membrane fuel cell using non-integer derivatives
Iftikhar, M. U., Riu, D. M., Druart, F., Rosini, S., Bultel, Y., & Retiere, N. M. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.044 · Cited by 88
He, J., Ahn, J.-W., & Choe, S.-Y. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.01.019 · Cited by 88
Yu, Y., Tu, Z., Zhang, H., Zhan, Z., & Pan, M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.01.075 · Cited by 88
Self-citationEttingshausen, F., Kleemann, J., Marcu, A., Tóth, G., Fueß, H., & Roth, C. (2011) · Fuel Cells · doi:10.1002/fuce.201000051 · Cited by 87
Liu, X., Peng, F., Lou, G., & Wen, Z. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.08.092 · Cited by 86
Evaluation of self-water-removal in a dead-ended proton exchange membrane fuel cell
Wan, Z., Liu, J., Luo, Z., Tu, Z., Liu, Z., & Liu, W. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.12.008 · Cited by 84
Self-citationDynamic cell performance of kW-grade proton exchange membrane fuel cell stack with dead-ended anode
Jang, J., Yan, W., Chiu, H.-C., & Lui, J.-Y. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.12.073 · Cited by 84
Gomez, A., Raj, A., SASMITO, A. P., & Shamim, T. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.12.030 · Cited by 84
Cho, J., Park, J., Oh, H., Min, K., Lee, E., & Jyoung, J.-Y. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.05.022 · Cited by 81
Flow dynamic characteristics in flow field of proton exchange membrane fuel cells
LIU, X., Guo, H., YE, F., & Ma, C. (2008) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2007.11.018 · Cited by 81
Le, A. D., Zhou, B., Shiu, H., Lee, C., & Chang, W.-C. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.05.045 · Cited by 79
Zhiani, M., Majidi, S., Silva, V. B. R. E., & Gharibi, H. (2016) · Energy · doi:10.1016/j.energy.2015.12.058 · Cited by 78
Development of Fuel-Cell Hybrid Vehicle
Matsumoto, T., Watanabe, N., Sugiura, H., & Ishikawa, T. (2002) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2002-01-0096 · Cited by 77
Chen, L., He, Y., & Tao, W. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2012.11.024 · Cited by 77
Overall and local effects of operating conditions in PEM fuel cells with dead-ended anode
Yang, Y., Zhang, X., Guo, L., & Liu, H. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.08.091 · Cited by 77
Self-citationTsai, S.-W., & Chen, Y. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.11.128 · Cited by 77
Yan, X., Hou, M., Sun, L., Cheng, H., Hong, Y., Liang, D. S., Shen, Q., Ming, P., & Yi, B. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.075 · Cited by 76
Mortazavi, M., & Tajiri, K. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.01.044 · Cited by 76
Mueller, F. L., Brouwer, J., Kang, S., Kim, H.-S., & Min, K. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.089 · Cited by 76
Effects of Cathode Inlet Relative Humidity on PEMFC Durability during Startup–Shutdown Cycling
Kim, J., Cho, E. A., Jang, J. H., Kim, H., Lim, T. H., Oh, I., Ko, J. J., & Oh, S. C. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3254170 · Cited by 75
Lin, R., Cui, X., Shan, J., Técher, L., Xiong, F., & Zhang, Q. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.09.042 · Cited by 75
Meyer, Q. P.-G., Ashton, S., Curnick, O. J., Reisch, T., Adcock, P., Rónaszegi, K., Robinson, J. B., & Brett, D. J. L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.125 · Cited by 75
Hydrogen purge and reactant feeding strategies in self-humidified PEM fuel cell systems
Migliardini, F., Palma, T. M. D., Gaele, M. F., & Corbo, P. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.06.196 · Cited by 75
Lu, L., Ouyang, M., Huang, H., Pei, P., & Yang, F. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.10.061 · Cited by 73
Tabuchi, Y., Shiomi, T., Aoki, O., Kubo, N., & Shinohara, K. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.08.070 · Cited by 73
Abbou, S., Dillet, J., Maranzana, G., Didierjean, S., & Lottin, O. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.11.079 · Cited by 73
Lin, R., Xiong, F., Tang, W., Técher, L., Zhang, J. M., & Ma, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.003 · Cited by 72
Proton-conducting polymer membranes in fuel cells—humidification aspects
Andreaus, B. (2003) · Solid State Ionics · doi:10.1016/j.ssi.2003.01.001 · Cited by 70
Kim, H., Cho, C. Y., Nam, J. H., Shin, D.-H., & Chung, T. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.02.002 · Cited by 70
Modeling hydrogen starvation conditions in proton-exchange membrane fuel cells
Ohs, J. H., Sauter, U., Maass, S., & Stolten, D. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.038 · Cited by 70
Improving dynamic performance of proton-exchange membrane fuel cell system using time delay control
Kim, Y. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.04.042 · Cited by 70
Yu, J., Jiang, Z., Hou, M., Dong, L., Xiao, Y., Dou, M., Shao, Z., & Yi, B. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.163 · Cited by 70
Characterization of the dynamic response of proton exchange membrane fuel cells – A numerical study
Loo, K. H., Wong, K. H., Tan, S. C., Lai, Y. M., & Tse, C. K. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.08.071 · Cited by 70
Effects of Cathode Inlet Relative Humidity on PEMFC Durability during Startup–Shutdown Cycling
Kim, J., Jo, Y. Y., Cho, E. A., Jang, J. H., Kim, H., Lim, T., Oh, I., Ko, J. J., & Son, I.-J. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3327888 · Cited by 69
PEM Fuel Cell System Solutions for Transportation
Fronk, M., Wetter, D. L., Masten, D. A., & Bosco, A. (2000) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2000-01-0373 · Cited by 69
Promislow, K., St‐Pierre, J., & Wetton, B. T. R. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.070 · Cited by 69
SASMITO, A. P., & MUJUMDAR, A. S. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.05.171 · Cited by 69
Water transport characteristics of a PEM fuel cell at various operating pressures and temperatures
Misran, E., Hassan, N. S. M., Daud, W. R. W., Majlan, E. H., & Rosli, M. I. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.12.076 · Cited by 66
Kong, I. M., Choi, J. W., Kim, S. I., Lee, E. S., & Kim, M. S. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.02.027 · Cited by 66
About internal currents during start-up in proton exchange membrane fuel cell
Maranzana, G., Moyne, C., Dillet, J., Didierjean, S., & Lottin, O. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.10.093 · Cited by 66
Cho, J., Oh, H., Park, J., Min, K., Lee, E., & Jyoung, J.-Y. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.10.041 · Cited by 65
Wan, Z. M., Wan, J., Liu, J., Tu, Z., Pan, M., Liu, Z., & Liu, W. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.02.045 · Cited by 65
Self-citationHirakata, S., Hara, M., Kakinuma, K., Uchida, M., Tryk, D. A., Uchida, H., & Watanabe, M. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.12.050 · Cited by 64
Yang, C.-W., & Chen, Y. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.05.010 · Cited by 64
Operation of a planar free-breathing PEMFC in a dead-end mode
Himanen, O., Hottinen, T., & Tuurala, S. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.12.002 · Cited by 64
Moçotéguy, P., Druart, F., Bultel, Y., Besse, S., & Rakotondrainibé, A. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.02.028 · Cited by 62
Hu, J., Sui, P. C., Kumar, S., & Djilali, N. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.04.073 · Cited by 61
Zhou, F., Andreasen, S. J., Kær, S. K., & Park, J. O. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.09.056 · Cited by 61
Water and pressure effects on a single PEM fuel cell
Zhou, B., Huang, W., Zong, Y., & Sobiesiak, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.04.027 · Cited by 60
Kim, D. K., Min, H. E., Kong, I. M., Lee, M. K., Lee, C. H., Kim, M. S., & Song, H. H. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.07.218 · Cited by 59
Hu, Z., Yu, Y., Wang, G., Chen, X., Chen, P., Chen, J., & Zhou, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.023 · Cited by 58
Self-citationSousa, T., Mamlouk, M., & Scott, K. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.08.057 · Cited by 57
Two-phase flow and thermal transients in proton exchange membrane fuel cells – A critical review
Banerjee, R., & Kandlikar, S. G. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.01.126 · Cited by 55
Dynamic response of proton exchange membrane fuel cell under mechanical vibration
Wang, X., Wang, S., Chen, S., Zhu, T., Xie, X., & Mao, Z. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.06.082 · Cited by 55
Self-citationDevelopment of Water Content Control System for Fuel Cell Hybrid Vehicles Based on AC Impedance
Kitamura, N., Manabe, K., Nonobe, Y., & Kizaki, M. (2010) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2010-01-1088 · Cited by 54
Dynamic interaction of a proton exchange membrane fuel cell and a lead-acid battery
Amphlett, J. C., de Oliveira, E. H., Mann, R. F., Roberge, P. R., Rodrigues, A., & Salvador, J. P. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02472-5 · Cited by 54
Development of a Durable PEMFC Startup Process by Applying a Dummy Load
Kim, J., Cho, E. A., Jang, J. H., Kim, H., Lim, T., Oh, I., Ko, J. J., & Oh, S. C. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148222 · Cited by 53
Effects of Purging on the Degradation of PEMFCs Operating with Repetitive On/Off Cycles
Lee, S., Cho, E., Lee, J., Kim, H., Lim, T., Oh, I., & Won, J. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2403083 · Cited by 53
Numerical study of gas purge in polymer electrolyte membrane fuel cell
Ding, J., Mu, Y., Zhai, S., & Tao, W. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.07.051 · Cited by 53
Miao, Z., Yu, H., Song, W., Hao, L., Shao, Z., Shen, Q., Hou, J., & Yi, B. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.03.045 · Cited by 52
Meyer, Q. P.-G., Ashton, S., Torija, S., Gurney, C., Boillat, P., Cochet, M., Engebretsen, E., Finegan, D. P., Adcock, P., Shearing, P. R., et al. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.04.018 · Cited by 52
A purge strategy for proton exchange membrane fuel cells under varying-load operations
Hung, C.-Y., Huang, H.-S., Tsai, S.-W., & Chen, Y. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.05.132 · Cited by 52
Hiramitsu, Y., MITSUZAWA, N., Okada, K., & Hori, M. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.016 · Cited by 51
Luo, Y., Jia, B., Jiao, K., Du, Q., Yin, Y. S., Wang, H., & Xuan, J. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.06.094 · Cited by 50
Hirakata, S., Mochizuki, T., Uchida, M., Uchida, H., & Watanabe, M. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.06.150 · Cited by 50
Eom, K., Kim, G., Cho, E., Jang, J. H., Kim, H., Yoo, S. J., Kim, S., & Hong, B. K. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.09.077 · Cited by 50
Transient response of a proton exchange membrane fuel cell
Weydahl, H., Møller-Holst, S., Hagen, G., & Børresen, B. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.073 · Cited by 49
Ehteshami, S. M. M., Taheri, A., & Chan, S. H. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2015.10.034 · Cited by 49
Hao, Y., Nakajima, H., Yoshizumi, H., Inada, A., Sasaki, K., & Ito, K. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.05.160 · Cited by 49
Manokaran, A., Pushpavanam, S., Sridhar, P., & Pitchumani, S. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.103 · Cited by 48
Migliardini, F., Unich, A., & Corbo, P. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.03.012 · Cited by 47
Cold-start of parallel and interdigitated flow-field polymer electrolyte membrane fuel cell
Santamaria, A. D., Bachman, J. C., & Park, J. W. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.03.164 · Cited by 45
Rao, R. M., & Rengaswamy, R. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.09.043 · Cited by 45
Verma, A., & Pitchumani, R. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.08.126 · Cited by 45
Yeşilyurt, S., Siegel, J. B., & Stefanopoulou, A. G. (2012) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4005626 · Cited by 44
Study of a porous membrane humidification method in polymer electrolyte fuel cells
Ramya, K., Sreenivas, J., & Dhathathreyan, K. S. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.12.088 · Cited by 44
Development of New TOYOTA FCHV-adv Fuel Cell System
Bono, T., Kizaki, M., Mizuno, H., Nonobe, Y., Takahashi, T., Matsumoto, T., & Kobayashi, N. (2009) · SAE International Journal of Engines · doi:10.4271/2009-01-1003 · Cited by 41
Yu, Y., Wang, G., Tu, Z., Zhan, Z., & Pan, M. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.141 · Cited by 41
Self-citationReactant recirculation system utilizing pressure swing for proton exchange membrane fuel cell
Uno, M., Shimada, T., & Tanaka, K. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.10.094 · Cited by 41
Mahyari, H. M., Afrouzi, H. H., & Shams, M. (2016) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2016.11.063 · Cited by 41
Lin, R., Lin, X., Weng, Y., & Ren, Y. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.04.045 · Cited by 40
Duy, V. N., Lee, J., Kim, K., Ahn, J., Park, S., Kim, T.-E., & Kim, H.-M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.05.107 · Cited by 40
Pérez-Page, M., & Pérez-Herranz, V. (2011) · International Journal of Electrochemical Science · doi:10.1016/s1452-3981(23)15011-5 · Cited by 40
Jia, L., Tan, Z., Kang, M., & Zhang, Z. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.04.201 · Cited by 39
Cahalan, T., Rehfeldt, S., Bauer, M., Becker, M., & Klein, H. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.05.281 · Cited by 39
Chen, F., CHU, H., Soong, C. Y., & YAN, W. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.08.026 · Cited by 38
SASMITO, A. P., Ali, M. I. H., & Shamim, T. (2014) · Fuel Cells · doi:10.1002/fuce.201300069 · Cited by 37
Park, J., & Min, K. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.05.054 · Cited by 37
Park, S., & Jung, D. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.03.170 · Cited by 36
Strahl, S., Husar, A., & Serra, M. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.10.074 · Cited by 36
Song, M.-K., Zhu, X., & Liu, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.04.016 · Cited by 35
Li, Q., Gong, J., Peng, S., Lu, S., Sui, P., Djilali, N., & Xiang, Y. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.016 · Cited by 35
Asghari, S., Khorasani, M. R. A., & Dashti, I. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.05.133 · Cited by 34
Kang, S., Min, K., & Yu, S. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.12.063 · Cited by 33
A dynamic model for high temperature polymer electrolyte membrane fuel cells
Boaventura, M., Sousa, J. M., & Mendes, A. M. M. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.04.218 · Cited by 33
Okedi, T. I., Meyer, Q. P.-G., Hunter, H. M. A., Shearing, P. R., & Brett, D. J. L. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.11.081 · Cited by 33
Ichikawa, Y., Oshima, N., Tabuchi, Y., & Ikezoe, K. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.023 · Cited by 32
Qu, S., Li, X., Ke, C., Shao, Z., & Yi, B. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.04.029 · Cited by 30
Kim, D. K., Koh, J. S., Kim, M. S., & Song, H. H. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.07.101 · Cited by 29
Jia, F., Guo, L., & Liu, H. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.06.061 · Cited by 29
Self-citationFaydi, Y., Lachat, R., & Meyer, Y. (2016) · Fuel · doi:10.1016/j.fuel.2016.05.074 · Cited by 29
Jenssen, D., Berger, O., & Krewer, U. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.08.005 · Cited by 28
Weydahl, H., Møller-Holst, S., & Børresen, B. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.01.037 · Cited by 25
Dynamic modeling and water management in proton exchange membrane fuel cell
Haddad, A., Bouyekhf, R., & ELMOUDNI, A. (2008) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.06.014 · Cited by 24
Water management in novel direct membrane deposition fuel cells under low humidification
Breitwieser, M., Moroni, R., Schock, J., Schulz, M., Schillinger, B., Pfeiffer, F., Zengerle, R., & Thiele, S. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.05.018 · Cited by 24
Huang, K.-J., Hwang, S., & Lai, W.-H. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.132 · Cited by 23
Kong, I. M., Jung, A., Kim, B., Baik, K. D., & Kim, M. S. (2015) · Energy · doi:10.1016/j.energy.2015.09.014 · Cited by 21
Influence of gas channel depth in self-humidified miniature PEM fuel cells with dead-ended anode
McKahn, D. A. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.02.132 · Cited by 21
Hamel, S., & Fréchette, L. G. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.04.020 · Cited by 21
Berning, T., & Kær, S. K. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.02.137 · Cited by 21
Kim, N., Seo, Y., Kim, K. B., Lee, N., Lee, J., Song, I., Choi, H., & Park, J. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.056 · Cited by 21
Dynamic water management of polymer electrolyte membrane fuel cells using intermittent RH control
Hussaini, I., & Wang, C. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.12.112 · Cited by 21
Paradox phenomena of proton exchange membrane fuel cells operating under dead-end anode mode
JIANG, D. B., Zeng, R., Wang, S., Jiang, L., & Varcoe, J. R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.086 · Cited by 17
High-pressure Metal Hydride Tank for Fuel Cell Vehicles
Mori, D., Hirose, K., Haraikawa, N., Takiguchi, T., Shinozawa, T., Matsunaga, T., Toh, K., Fujita, K., Kumano, A., & Kubo, H. (2007) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2007-01-2011 · Cited by 17
Dynamic modeling of a high-temperature proton exchange membrane fuel cell with a fuel processor
Park, J., & Min, K. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.04.210 · Cited by 15
Efficiency Improvement of Boost Converter for Fuel Cell Bus by Silicon Carbide Diodes
Sugiura, T., Tanida, A., & Tamura, K. (2016) · SAE International journal of alternative powertrains · doi:10.4271/2016-01-1234 · Cited by 15
Sidik, R. A. (2009) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-009-0783-8 · Cited by 14
Kim, T., Kim, S., Kim, W., Lee, J.-H., Cho, K.-S., Park, K., & Choi, W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.12.009 · Cited by 11
Effect of dynamic operation on chemical degradation of a polymer electrolyte membrane fuel cell
Jung, M., & Williams, K. A. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.10.105 · Cited by 9
Progress and Challenges in Toyota's Fuel Cell Vehicle Development
Sekine, S., & Kojima, K. (2011) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2011-28-0061 · Cited by 9
Enhancing PtCo Electrode Catalyst Performance for Fuel Cell Vehicle Application
Mizutani, N., & Ishibashi, K. (2016) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2016-01-1187 · Cited by 9
Performance Considerations of a Bi-Directional DC/DC Converter for Fuel Cell Powered Vehicles
Flohr, G. R. (2002) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2002-01-1902 · Cited by 6
Control of Automotive PEM Fuel Cell Systems
Choi, S.-H., Song, Y.-I., Suh, K.-W., Lee, N.-W., Kim, D., Kwon, S., & Lim, T.-W. (2007) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2007-01-3491 · Cited by 2
Manokaran, A., Jalajakshi, A., Sahu, A. K., Sridhar, P., Pitchumani, S., & Shukla, A. (2011) · Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy · doi:10.1177/2041296710394262 · Cited by 2
Cited by
A comprehensive study of renewable energy sources: Classifications, challenges and suggestions
Ang, T.-Z., Salem, M., Kamarol, M., Das, H. S., Nazari, M. A., & Prabaharan, N. (2022) · Energy Strategy Reviews · doi:10.1016/j.esr.2022.100939 · Cited by 1,126
Haider, R., Wen, Y., Ma, Z.-F., Wilkinson, D. P., Zhang, L., Yuan, X., Song, S., & Zhang, J. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00296h · Cited by 785
The fuel cell electric vehicles: The highlight review
Pramuanjaroenkij, A., & Kakaç, S. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.11.103 · Cited by 469
Zhao, J., Tu, Z., & Chan, S. H. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229434 · Cited by 442
Self-citationGhosh, A. (2020) · Energies · doi:10.3390/en13102602 · Cited by 357
Metadata
- Authors
- Wang, G., Yu, Y., Liu, H., Gong, C., Wen, S., Wang, X., & Tu, Z.
- Venue
- Fuel Processing Technology
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 179
- Pages
- 203-228
- ISSN
- 0378-3820 (ISSN-L)
- OpenAlex
- W2883208765
- Cited by
- 274
- References
- 195
- FWCI
- 9.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.