Improvement of aromatics production from catalytic pyrolysis of cellulose over metal-modified hierarchical HZSM-5
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Abstract Metal modification on hierarchical HZSM-5 produced by alkaline desilication was adopted to improve aromatics production from catalytic pyrolysis of cellulose. The influence of alkali concentration in the desilication on catalytic performance of zeolites was first studied. Mild alkaline treatment preserved the micropore structure and acid sites of zeolites when introducing mesopores, while further increase of alkali concentration destroyed the micropores and acidity. The HZSM-5 desilicated by 0.3 M NaOH solution had the best catalytic performance, which increased the aromatics production and BTX selectivity. Then, metal (Fe and Ga) modification on the optimal zeolite was used to further improve the catalytic performance. Fe modification showed negative effect on aromatics production while Ga modification had the positive. Both Fe and Ga modification increased the selectivity of monoaromatics at the expense of polyaromatics. Furthermore, Fe modification mainly enhanced the production of BTX, while Ga modification promoted the formation of both BTX and alkylbenzenes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanism study on the pyrolysis of a synthetic β-O-4 dimer as lignin model compound
Wang, S., Ru, B., Dai, G., Shi, Z., Zhou, J., Luo, Z., Ni, M., & Cen, K. (2017) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2016.07.129 · Cited by 86
Self-citationCorrelation of Feedstock and Bio-oil Compound Distribution
Li, J., Chen, Y., Yang, H., Zhu, D., Chen, X., Wang, X., & Chen, H. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00545 · Cited by 63
Cited by
A Review of Recent Advances in Biomass Pyrolysis
Wang, G., Dai, Y., Yang, H., Xiong, Q., Wang, K., Zhou, J., Li, Y., & Wang, S. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03107 · Cited by 597
Self-citationChen, X., Che, Q., Li, S., Liu, Z., Yang, H., Chen, Y., Wang, X., Shao, J., & Chen, H. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106180 · Cited by 460
Nishu, Liu, R., Rahman, M. M., Sarker, M., Chai, M., Li, C., & Cai, J. (2020) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106301 · Cited by 319
Liu, R., Sarker, M., Rahman, M. M., Li, C., Chai, M., Nishu, Cotillon, R., & Scott, N. R. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100852 · Cited by 264
Thermochemical conversion of biomass: Potential future prospects
Wang, Y., & Wu, J. J. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113754 · Cited by 259
Biofuels and renewable chemicals production by catalytic pyrolysis of cellulose: a review
Hassan, N. S., Jalil, A. A., Hitam, C. N. C., Vo, D. V. N., & Nabgan, W. (2020) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01040-7 · Cited by 176
Nishu, Li, Y., & Liu, R. (2022) · Journal of the Energy Institute · doi:10.1016/j.joei.2022.01.001 · Cited by 66
Xue, S., Luo, Z., Wang, W., Li, S., Sun, H., Zhou, Q., & Liang, X. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.104884 · Cited by 30
Metadata
- Authors
- Dai, G., Wang, S., Zou, Q., & Huang, S.
- Venue
- Fuel Processing Technology
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 179
- Pages
- 319-323
- ISSN
- 0378-3820 (ISSN-L)
- OpenAlex
- W2884023039
- Cited by
- 111
- References
- 2
- FWCI
- 4.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.