Hydrothermal liquefaction of Chlorella vulgaris and Nannochloropsis gaditana in a continuous stirred tank reactor and hydrotreating of biocrude by nickel catalysts
The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Abstract
Abstract Continuous hydrothermal liquefaction and further upgrading of the algal biocrude are of great importance for algae biofuel process scale-up and improvement of fuel properties. In this study, two strains of microalgae were used for processing in a continuous stirred tank reactor at 350 °C and 24 MPa for 15 min residence time. An average of 36.2 wt% and 31.5 wt% biocrude yields were achieved for Chlorella vulgaris and Nannochloropsis gaditana, respectively. The obtained biocrude was further upgraded by hydrotreating using commercial NiMo/Al2O3 and NiW/Al2O3 catalysts at two temperatures (250 °C and 400 °C) in a batch autoclave reactor for 4 h. Products distribution, analysis by elemental content, gas chromatography (GC), gel permeation chromatography (GPC), thermogravimetric analysis (TGA) and nuclear magnetic resonance spectroscopy (1H NMR) on upgrading products indicate that upgrading by both catalysts lead to improved physicochemical fuel properties, during 250 °C upgrading step, decarbonylation, decarboxylation and repolymerization are the dominant reactions while hydrodeoxygenation and cracking reaction are more promoted at 400 °C. The gasoline, kerosene and diesel oil components in the algal biocrude were increased from 18 wt% to >30 wt% after catalytic upgrading.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Brennan, L., & Owende, P. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.009 · Cited by 4,894
Bio-oil production and upgrading research: A review
Xiu, S., & Shahbazi, A. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.04.028 · Cited by 1,127
HOW MANY SPECIES OF ALGAE ARE THERE?
Guiry, M. D. (2012) · Journal of Phycology · doi:10.1111/j.1529-8817.2012.01222.x · Cited by 1,002
Vardon, D. R., Sharma, B. K., Scott, J., Yu, G., Wang, Z., Schideman, L., Zhang, Y., & Strathmann, T. J. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.06.041 · Cited by 662
Continuous Hydrothermal Liquefaction of Biomass: A Critical Review
Castello, D., Pedersen, T. H., & Rosendahl, L. A. (2018) · Energies · doi:10.3390/en11113165 · Cited by 343
Ramirez, J., Brown, R., & Rainey, T. (2015) · Energies · doi:10.3390/en8076765 · Cited by 312
Liu, X., Saydah, B., Eranki, P., Colosi, L. M., Greg Mitchell, B., Rhodes, J., & Clarens, A. F. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.08.112 · Cited by 246
Feedstocks for fuels and chemicals from algae: Treatment of crude bio-oil over HZSM-5
Li, Z., & Savage, P. E. (2013) · Algal Research · doi:10.1016/j.algal.2013.01.003 · Cited by 120
Assessing microalgae biorefinery routes for the production of biofuels via hydrothermal liquefaction
López Barreiro, D., Samorì, C., Terranella, G., Hornung, U., Kruse, A., & Prins, W. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.10.031 · Cited by 116
Self-citationCatalytic upgrading of crude algal oil using platinum/gamma alumina in supercritical water
Duan, P., Bai, X., Xu, Y., Zhang, A., Wang, F., Zhang, L., & Miao, J. (2013) · Fuel · doi:10.1016/j.fuel.2012.12.074 · Cited by 109
Catalytic Hydrotreatment of algal biocrude from fast Hydrothermal Liquefaction
Patel, B., Arcelus-Arrillaga, P., Izadpanah, A., & Hellgardt, K. (2017) · Renewable Energy · doi:10.1016/j.renene.2016.09.056 · Cited by 84
Cited by
Hydrothermal liquefaction and gasification of biomass and model compounds: a review
Yang, C., Wang, S., Yang, J., Xu, D., Li, Y., Li, J., & Zhang, Y. (2020) · Green Chemistry · doi:10.1039/d0gc02802a · Cited by 167
Djandja, O. S., Wang, Z., Chen, L., Qin, L., Wang, F., Xu, Y., & Duan, P. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c01973 · Cited by 93
Application of Nanotechnology in Bioenergy Production from Algae and Cyanobacteria
Borah, D., Rout, J., & Nooruddin, T. (2023) · Modern Nanotechnology · doi:10.1007/978-3-031-31104-8_12 · Cited by 7
Metadata
- Authors
- Guo, B., Walter, V., Hornung, U., & Dahmen, N.
- Venue
- Fuel Processing Technology
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 191
- Pages
- 168-180
- ISSN
- 0378-3820 (ISSN-L)
- OpenAlex
- W2936483340
- Cited by
- 83
- References
- 11
- FWCI
- 2.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.