The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Liquid oils produced from pyrolysis of plastic wastes with heat carrier in rotary kiln
Abstract
The conversion of plastic waste to energy product is a promising solution to both energy shortage and environment pollution. In this study, plastic wastes were pyrolyzed in a rotary kiln to recover liquid oils that could be used as the source of valuable chemicals or fuels. The effects of filling ratio of heat carriers, and plastic wastes types on the product spectrum were investigated. The dynamic models of heat carrier in pyrolysis of plastic wastes showed that the suitable filling ratio of heat carrier for oil production is 15%. The liquid oils generated from a simulated mixture of plastic wastes pyrolysis had the most gasoline range hydrocarbons and reached to 89.1%. The simulated distillation of liquid oils showed that the gasoline fraction was between 49% and 84.5%. The NMR analysis of liquid oils obtained from polyethylene and a simulated mixture of plastic wastes pyrolysis showed that loading more heat carrier in the rotary kiln was favorable to produce olefins and paraffin. The NMR analysis and the heat carrier models revealed that the greater heat transfer enhanced the H+ transfer in radical reactions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Jia, X., Qin, C., Friedberger, T., Guan, Z., & Huang, Z. (2016) · Science Advances · doi:10.1126/sciadv.1501591 · Cited by 534
Cited by
Pyrolysis technology for plastic waste recycling: A state-of-the-art review
Dai, L., Zhou, N., Lv, Y., Cheng, Y., Wang, Y., Liu, Y., Cobb, K., Chen, P., Lei, H., & Ruan, R. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101021 · Cited by 485
Self-citationZhou, N., Dai, L., Lv, Y., Li, H., Deng, W., Guo, F., Chen, P., Lei, H., & Ruan, R. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129412 · Cited by 309
Kinetics, Product Evolution, and Mechanism for the Pyrolysis of Typical Plastic Waste
Zhang, Y., Fu, Z., Wang, W., Ji, G., Zhao, M., & Li, A. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c04915 · Cited by 283
Self-citationHarussani, M. M., Sapuan, S. M., Rashid, U., Khalina, A., & Ilyas, R. A. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.149911 · Cited by 255
Ligero, A., Calero, M., Pérez, A., Solís, R. R., Muñoz-Batista, M. J., & Martín-Lara, M. Á. (2023) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2023.03.041 · Cited by 89
Metadata
- Authors
- Zhang, Y., Ji, G., Chen, C., Wang, Y., Wang, W., & Li, A.
- Venue
- Fuel Processing Technology
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 206
- Pages
- 106455
- ISSN
- 0378-3820 (ISSN-L)
- OpenAlex
- W3026630370
- Cited by
- 171
- References
- 2
- FWCI
- 6.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.