The DOI matches its Crossref record; 133 of the 133 references it cites were found in a registry or an index.
Pyrolysis of polypropylene plastic waste into carbonaceous char: Priority of plastic waste management amidst COVID-19 pandemic
Open accessAbstract
COVID-19 global pandemic, originated from Wuhan, resulted in a massive increase in the output of polypropylene (PP)-based personal protective equipment (PPE) for healthcare workers. The continuous demand of PPE across the world caused the PP based plastic wastes accumulation. Some alternative approaches that have been practiced apart from collecting the plastic waste in the landfills are incineration approach and open burning. However, there were many drawbacks of these practices, which promote the release of chemical additives and greenhouse gases into the environment. Therefore, a proper approach in treating the plastic wastes, which introduces conversion of plastic wastes into renewable energy is paramount. Along the way of extensive research and studies, the recovery of PP plastic to fuel-like liquid oil and solid char through thermal decomposition of pyrolysis process, helps in reducing the number of PP plastic wastes and produces good quality pyrolysis liquid oil and solid char to be used in fuel applications. This paper summarizes the pyrolysis process for massively produced PP plastic wastes, type of pyrolysis used and the main pyrolysis parameters affecting the product yields. Literature studies of pyrolysis of PP plastic and several key points to optimize solid char production for PP were thoroughly elaborated in this review paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
IOP Conference Series: Earth and Environmental Science
(2020) · IOP Conference Series Earth and Environmental Science · doi:10.1088/issn.1755-1315 · Cited by 12,764
IOP Conference Series: Materials Science and Engineering
(2022) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/1231/1/011001 · Cited by 10,357
SFPE Handbook of Fire Protection Engineering
(2016) · Springer eBooks · doi:10.1007/978-1-4939-2565-0 · Cited by 3,803
Degradation rates of plastics in the environment
Chamas, A., Moon, H., Zheng, J., Qiu, Y., Tabassum, T., Jang, J. H., Abu-Omar, M., Scott, S. L., & Suh, S. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06635 · Cited by 3,463
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Ranney, M. L., Griffeth, V., & Jha, A. K. (2020) · New England Journal of Medicine · doi:10.1056/nejmp2006141 · Cited by 2,018
Panda, A. K., Singh, R. K., & Mishra, D. K. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.005 · Cited by 956
Martínez, J. D., Puy, N., Murillo, R., García, T., Navarro, M. V., & Mastral, A. M. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.02.038 · Cited by 849
Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP)
Achilias, D. S., Roupakias, C., Megalokonomos, P., Lappas, A. A., & Antonakou, Ε. V. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.06.076 · Cited by 730
Cited by
Suriani, M. J., Ilyas, R. A., Zuhri, M. Y. M., Khalina, A., Sultan, M. T. H., Sapuan, S. M., Ruzaidi, C. M., Wan, F. N., Zulkifli, F., Harussani, M. M., et al. (2021) · Polymers · doi:10.3390/polym13203514 · Cited by 285
Self-citationWaste Management and the Perspective of a Green Hospital—A Systematic Narrative Review
Lattanzio, S., Stefanizzi, P., D’ambrosio, M., Cuscianna, E., Riformato, G., Migliore, G., Tafuri, S., & Bianchi, F. P. (2022) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph192315812 · Cited by 118
“This method reduces PP plastic waste and produces pyrolysis liquid oil and solid char to be used in fuel applications [37].”
MethodStructure-oriented conversions of plastics to carbon nanomaterials
Ren, S., Xu, X., Hu, K., Tian, W., Duan, X., Yi, J., & Wang, S. (2022) · Carbon Research · doi:10.1007/s44246-022-00016-2 · Cited by 98
Yang, Y., Jalalah, M., Alsareii, S. A., Harraz, F. A., Thakur, N., Zheng, Y., Koutb, M., Yoon, Y., & Salama, E.-S. (2024) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2024.112926 · Cited by 65
Chasioti, A., & Zabaniotou, A. (2024) · Sustainability · doi:10.3390/su16145852 · Cited by 15
Metadata
- Authors
- Harussani, M. M., Sapuan, S. M., Rashid, U., Khalina, A., & Ilyas, R. A.
- Venue
- Science of The Total Environment
- Publisher
- Elsevier BV
- Published
- 2022-01
- Volume
- 803
- Pages
- 149911
- ISSN
- 0048-9697 (ISSN-L)
- OpenAlex
- W3194906783
- Cited by
- 255
- References
- 133
- FWCI
- 12.04
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Pyrolysis of polypropylene plastic waste into carbonaceous char: Priority of plastic waste management amidst COVID-19 pandemic. https://app.cochat.ai/papers/10.1016/j.scitotenv.2021.149911
- The paper
- Harussani, M. M., Sapuan, S. M., Rashid, U., Khalina, A., & Ilyas, R. A. (2022). Pyrolysis of polypropylene plastic waste into carbonaceous char: Priority of plastic waste management amidst COVID-19 pandemic. Science of The Total Environment. https://doi.org/10.1016/j.scitotenv.2021.149911
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.