Hydrothermal replacement of biogenic and abiogenic aragonite by Mg-carbonates – Relation between textural control on effective element fluxes and resulting carbonate phase
Open accessThe DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Abstract Dolomitization, i.e., the secondary replacement of calcite or aragonite (CaCO3) by dolomite (CaMg[CO3]2), is one of the most volumetrically important carbonate diagenetic processes. It occurs under near surface and shallow burial conditions and can significantly modify rock properties through changes in porosity and permeability. Dolomitization fronts are directly coupled to fluid pathways, which may be related to the initial porosity/permeability of the precursor limestone, an existing fault network or secondary porosity/permeability created through the replacement reaction. In this study, the textural control on the replacement of biogenic and abiogenic aragonite by Mg-carbonates, that are typical precursor phases in the dolomitization process, was experimentally studied under hydrothermal conditions. Aragonite samples with different textural and microstructural properties exhibiting a compact (inorganic aragonite single crystal), an intermediate (bivalve shell of Arctica islandica) and open porous structure (skeleton of coral Porites sp.) were reacted with a solution of 0.9 M MgCl2 and 0.015 M SrCl2 at 200 °C. The replacement of aragonite by a Ca-bearing magnesite and a Mg–Ca carbonate of non-stoichiometric dolomitic composition takes place via a dissolution-precipitation process and leads to the formation of a porous reaction front that progressively replaces the aragonite precursor. The reaction leads to the development of porosity within the reaction front and distinctive microstructures such as gaps and cavities at the reaction interface. The newly formed reaction rim consists of chemically distinct phases separated by sharp boundaries. It was found that the number of phases and their chemical variation decreases with increasing initial porosity and reactive surface area. This observation is explained by variations in effective element fluxes that result in differential chemical gradients in the fluid within the pore space of the reaction rim. Observed reaction rates are highest for the replacement of the initially highly porous coral and lowest for the compact structure of a single aragonite crystal. Therefore, the reaction progress equally depends on effective element fluxes between the fluid at the reaction interface and the bulk solution surrounding the test material as well as the reactive surface area. This study demonstrates that the textural and microstructural properties of the parent material have a significant influence on the chemical composition of the product phase. Moreover, our data highlight the importance of effective fluid-mediated element exchange between the fluid at the reaction interface and the bulk solution controlled by the local microstructure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dolomite: occurrence, evolution and economically important associations
Warren, J. (2000) · Earth-Science Reviews · doi:10.1016/s0012-8252(00)00022-2 · Cited by 1,435
Calcium Carbonate Formation and Dissolution
Morse, J. W., Arvidson, R. S., & Lüttge, A. (2007) · Chemical Reviews · doi:10.1021/cr050358j · Cited by 1,228
Microbial mediation as a possible mechanism for natural dolomite formation at low temperatures
Vasconcelos, C., McKenzie, J. A., Bernasconi, S., Grujic, D., & Tiens, A. J. (1995) · Nature · doi:10.1038/377220a0 · Cited by 745
Gregg, J. M., Bish, D. L., Kaczmarek, S. E., & Machel, H. G. (2015) · Sedimentology · doi:10.1111/sed.12202 · Cited by 480
Surface chemistry allows for abiotic precipitation of dolomite at low temperature
Roberts, J. A., Kenward, P. A., Fowle, D. A., Goldstein, R. H., González, L. A., & Moore, D. S. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1305403110 · Cited by 246
Some hydrothermal syntheses of dolomite and protodolomite
Graf, D. L., & Goldsmith, J. R. (1956) · The Journal of Geology · doi:10.1086/626332 · Cited by 225
Kaczmarek, S. E., & Sibley, D. F. (2011) · Sedimentary Geology · doi:10.1016/j.sedgeo.2011.07.003 · Cited by 199
Zhang, F., Xu, H., Konishi, H., Shelobolina, E. S., & Roden, E. E. (2012) · American Mineralogist · doi:10.2138/am.2012.3979 · Cited by 170
The dolomitization of CaCO3: an experimental study at 252–295°C
Katz, A., & Matthews, A. (1977) · Geochimica et Cosmochimica Acta · doi:10.1016/0016-7037(77)90238-1 · Cited by 165
Geske, A., Zorlu, J., Richter, D. K., Buhl, D., Niedermayr, A., & Immenhauser, A. (2012) · Chemical Geology · doi:10.1016/j.chemgeo.2012.09.014 · Cited by 135
Self-citationFerry, J. M., Passey, B. H., Vasconcelos, C., & Eiler, J. M. (2011) · Geology · doi:10.1130/g31845.1 · Cited by 123
Sequential Basal Faults in Devonian Dolomite, Nopah Range, Death Valley Area, California
Wenk, H. R., & Zenger, D. H. (1983) · Science · doi:10.1126/science.222.4623.502 · Cited by 116
Synsedimentary diagenesis in a Cryogenian reef complex: Ubiquitous marine dolomite precipitation
Hood, A. V. S., & Wallace, M. W. (2012) · Sedimentary Geology · doi:10.1016/j.sedgeo.2012.02.004 · Cited by 112
Pearce, M. A., Timms, N. E., Hough, R. M., & Cleverley, J. S. (2013) · Contributions to Mineralogy and Petrology · doi:10.1007/s00410-013-0905-2 · Cited by 55
Vandeginste, V., John, C. M., van de Flierdt, T., & Cosgrove, J. W. (2013) · AAPG Bulletin · doi:10.1306/11011212076 · Cited by 32
Miura, N., & Kawabe, I. (2000) · GEOCHEMICAL JOURNAL · doi:10.2343/geochemj.34.223 · Cited by 19
Cited by
Liu, D., Xu, Y., Papineau, D., Yu, N., Fan, Q., Qiu, X., & Wang, H. (2019) · Geochimica et Cosmochimica Acta · doi:10.1016/j.gca.2018.12.036 · Cited by 141
Kaczmarek, S. E., & Thornton, B. P. (2017) · Chemical Geology · doi:10.1016/j.chemgeo.2017.08.004 · Cited by 128
On the delimitation of the carbonate burial realm
Immenhauser, A. (2022) · The Depositional Record · doi:10.1002/dep2.173 · Cited by 95
Self-citationMartin, A. S., & Kaczmarek, S. E. (2025) · Journal of Sedimentary Research · doi:10.2110/jsr.2025.048 · Cited by 2
Metadata
- Authors
- Jonas, L., Müller, T., Dohmen, R., Immenhauser, A., & Putlitz, B.
- Venue
- Geochimica et Cosmochimica Acta
- Publisher
- Elsevier BV
- Published
- 2017-01
- Volume
- 196
- Pages
- 289-306
- ISSN
- 0016-7037 (ISSN-L)
- OpenAlex
- W2527930943
- Cited by
- 46
- References
- 16
- FWCI
- 2.45
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.