The DOI matches its Crossref record.
Characterization of ceramic waste aggregate concrete
Open accessAbstract
There is a growing interest in using waste materials such as ceramics as alternative aggregate materials for construction. While other ceramic product wastes such as sanitary wares and electrical insulators have been extensively investigated, not much findings are available on ceramic wall and floor tiles wastes. Thus, the current study focuses on the mechanical characterization of waste ceramic wall and floor tiles aggregate concrete. Ceramic wastes sourced from construction and demolition wastes were separated from other debris and crushed using a quarry metal hammer. Ceramic tiles were sieved into fine and coarse aggregates in line with standards. Other materials used were gravel, river sand, cement and potable water. Workability of the fresh concrete was checked through slump test, and concrete cubes of 150 mm dimensions and cylinders of 100 mm × 200 mm were cast in the laboratory. After 24 h of casting, the concrete samples were demolded and were cured by immersion in water tank at temperature of 22 °C. The compressive and split-tensile strengths of the hardened concrete samples were determined after curing them for 3, 7, 14 and 28 days. Results showed that both the compressive strength and split tensile strength increased appreciably with the curing age than the conventional concrete.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
de Brito, J., & Kurda, R. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123558 · Cited by 436
Plastic wastes to construction products: Status, limitations and future perspective
Awoyera, P. O., & Adesina, A. (2020) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2020.e00330 · Cited by 431
Self-citationPurchase, C. K., Al Zulayq, D. M., O’Brien, B. T., Kowalewski, M. J., Berenjian, A., Tarighaleslami, A. H., & Seifan, M. (2021) · Materials · doi:10.3390/ma15010076 · Cited by 357
Naderi Kalali, E., Lotfian, S., Entezar Shabestari, M., Khayatzadeh, S., Zhao, C., & Yazdani Nezhad, H. (2023) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2023.100763 · Cited by 228
Metadata
- Authors
- Awoyera, P. O., Ndambuki, J. M., Akinmusuru, J. O., & Omole, D. O.
- Venue
- HBRC Journal
- Publisher
- Informa UK Limited
- Published
- 2018-12
- Volume
- 14
- Issue
- 3
- Pages
- 282-287
- ISSN
- 1687-4048 (ISSN-L)
- OpenAlex
- W2557249924
- Cited by
- 205
- References
- 0
- FWCI
- 8.29
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Characterization of ceramic waste aggregate concrete. https://app.cochat.ai/papers/10.1016/j.hbrcj.2016.11.003
- The paper
- Awoyera, P. O., Ndambuki, J. M., Akinmusuru, J. O., & Omole, D. O. (2018). Characterization of ceramic waste aggregate concrete. HBRC Journal. https://doi.org/10.1016/j.hbrcj.2016.11.003
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.