The DOI matches its Crossref record.
Polycaprolactone/carboxymethyl chitosan nanofibrous scaffolds for bone tissue engineering application
Abstract
This research focused on the physical properties and cell compatibility of nanofibrous scaffolds based on polycaprolactone/chitosan (PCL/CTS) and PCL/carboxymethyl chitosan (PCL/CMC) blends for bone tissue engineering application. Scaffolds were fabricated by electrospinning technique. SEM images showed that the undesirable ultrafine and splitting fibers in PCL/CTS scaffolds are eliminated by replacing CTS with CMC. PCL/CMC scaffolds exposed significantly improved surface hydrophilicity improvement comparing to PCL/CTS ones. The water contact angle of PCL scaffold was reduced on the addition of 15% CMC from 123 ± 1° to 51 ± 3° in high concentration of CMC scaffold. The average diameter of fibers in PCL/CTS 15% and PCL/CMC 15% were 439 and 356 nm, respectively, which demonstrated higher concentrations of CMC resulted in decrease fibers diameter than other blended scaffolds. FTIR spectroscopy confirmed the composition of PCL/CTS and PCL/CMC scaffolds. The culturing of human osteoblast cells (MG63) on the scaffolds showed that all scaffolds are biocompatible. The PCL/CMC nanofibers exhibited promoting proliferation trend, compared to the PCL and PCL/CTS ones, especially at maximum concentrations of CMC. The results demonstrate that the PCL/CMC electrospun scaffolds can be an excellent candidate for bone tissue engineering application.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Biomaterials for bone tissue engineering scaffolds: a review
Qu, H., Fu, H., Han, Z., & Sun, Y. (2019) · RSC Advances · doi:10.1039/c9ra05214c · Cited by 827
Carboxymethyl chitosan: Properties and biomedical applications
Shariatinia, Z. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.09.131 · Cited by 777
Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
Biomedical applications of chitosan electrospun nanofibers as a green polymer – Review
Kalantari, K., Afifi, A. M., Jahangirian, H., & Webster, T. J. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.12.011 · Cited by 389
Applications of chitin and chitosan nanofibers in bone regenerative engineering
Tao, F., Cheng, Y., Shi, X., Zheng, H., Du, Y., Xiang, W., & Deng, H. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115658 · Cited by 341
Metadata
- Authors
- Sharifi, F., Atyabi, S. M., Norouzian, D., Zandi, M., Irani, S., & Bakhshi, H.
- Venue
- International Journal of Biological Macromolecules
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 115
- Pages
- 243-248
- ISSN
- 0141-8130 (ISSN-L)
- OpenAlex
- W2797743651
- Cited by
- 171
- References
- 0
- FWCI
- 6.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Polycaprolactone/carboxymethyl chitosan nanofibrous scaffolds for bone tissue engineering application. https://app.cochat.ai/papers/10.1016/j.ijbiomac.2018.04.045
- The paper
- Sharifi, F., Atyabi, S. M., Norouzian, D., Zandi, M., Irani, S., & Bakhshi, H. (2018). Polycaprolactone/carboxymethyl chitosan nanofibrous scaffolds for bone tissue engineering application. International Journal of Biological Macromolecules. https://doi.org/10.1016/j.ijbiomac.2018.04.045
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.