The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Preparation of chitosan-sodium alginate films through layer-by-layer assembly and ferulic acid crosslinking: Film properties, characterization, and formation mechanism
Abstract
Chitosan-alginate films were prepared through layer-by-layer assembly combined with ferulic acid crosslinking. Their mechanical properties, opacity, and hydrophobicity were compared to films prepared by direct mixing, crosslinking alone, and LBL assembly alone. Thermogravimetric analysis, X-ray diffraction, scanning electron microscopy and Fourier-transform infrared spectroscopy were used to characterize the films and analyze their formation mechanism. The results indicated that the layer-by-layer assembly and ferulic acid crosslinking combination increased the tensile strength and light-blocking ability of the films. In addition, the films had a lower water vapor transmission rate, swelling degree, and water solubility, as well as higher hydrophobicity. Scanning electron microscopy showed a good compatibility between the film components of the film prepared by the combination technique. The structural characterization results revealed some strong interactions among the amino, carboxyl, and hydroxyl groups of the ferulic acid, chitosan, and sodium alginate in the film. The driving force for film formation was the generation of non-covalent bonds among the film components rather than covalent bonds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent advances on polysaccharides, lipids and protein based edible films and coatings: A review
Hassan, B., Chatha, S. A. S., Hussain, A. I., Zia, K. M., & Akhtar, N. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.11.097 · Cited by 1,115
Emerging Chitosan-Based Films for Food Packaging Applications
Wang, H., Qian, J., & Ding, F. (2018) · Journal of Agricultural and Food Chemistry · doi:10.1021/acs.jafc.7b04528 · Cited by 859
Annual book of ASTM standards 2000
Rukmana, R. (2000) · Cited by 827
Sun, L., Sun, J., Chen, L., Niu, P., Yang, X., & Guo, Y. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.01.016 · Cited by 571
Mechanical properties of gelatin films cross-linked, respectively, by ferulic acid and tannin acid
Cao, N., Fu, Y., & He, J. (2007) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2006.07.001 · Cited by 376
Characterisation of ferulic acid incorporated starch–chitosan blend films
Mathew, S., & Abraham, T. E. (2008) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2007.03.012 · Cited by 366
Physical properties of chitosan films incorporated with natural antioxidants
Souza, V. G. L., Fernando, A. L., Pires, J. R. A., Rodrigues, P. F., Lopes, A. A. S., & Fernandes, F. M. B. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.04.056 · Cited by 344
Liu, J., Liu, S., Wu, Q., Gu, Y., Kan, J., & Jin, C. (2017) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2017.06.035 · Cited by 341
Mi, F.-L., Sung, H.-W., & Shyu, S.-S. (2002) · Carbohydrate Polymers · doi:10.1016/s0144-8617(01)00212-0 · Cited by 332
Crosslinking capacity of tannic acid in plasticized chitosan films
Rivero, S., García, M. A., & Pinotti, A. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.04.048 · Cited by 308
Cited by
Chitosan based nanocomposite films and coatings: Emerging antimicrobial food packaging alternatives
Kumar, S., Mukherjee, A., & Dutta, J. (2020) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2020.01.002 · Cited by 850
The Effect of Nanofillers on the Functional Properties of Biopolymer-Based Films: A Review
Jamróz, E., Kulawik, P., & Kopel, P. (2019) · Polymers · doi:10.3390/polym11040675 · Cited by 515
Biopolymer-Based Sustainable Food Packaging Materials: Challenges, Solutions, and Applications
Perera, K. Y., Jaiswal, A. K., & Jaiswal, S. (2023) · Foods · doi:10.3390/foods12122422 · Cited by 440
Kocira, A., Kozłowicz, K., Panasiewicz, K., Staniak, M., Szpunar-Krok, E., & Hortyńska, P. (2021) · Agronomy · doi:10.3390/agronomy11050813 · Cited by 391
Nair, M. S., Tomar, M., Punia, S., Kukula-Koch, W., & Kumar, M. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.07.083 · Cited by 384
Metadata
- Authors
- Li, K., Zhu, J., Guan, G., & Wu, H.
- Venue
- International Journal of Biological Macromolecules
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 122
- Pages
- 485-492
- ISSN
- 0141-8130 (ISSN-L)
- OpenAlex
- W2899076151
- Cited by
- 271
- References
- 32
- FWCI
- 3.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation of chitosan-sodium alginate films through layer-by-layer assembly and ferulic acid crosslinking: Film properties, characterization, and formation mechanism. https://app.cochat.ai/papers/10.1016/j.ijbiomac.2018.10.188
- The paper
- Li, K., Zhu, J., Guan, G., & Wu, H. (2019). Preparation of chitosan-sodium alginate films through layer-by-layer assembly and ferulic acid crosslinking: Film properties, characterization, and formation mechanism. International Journal of Biological Macromolecules. https://doi.org/10.1016/j.ijbiomac.2018.10.188
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.