The DOI matches its Crossref record; 724 of the 732 references it cites were found in a registry or an index.
Poly (lactic acid) blends: Processing, properties and applications
Abstract
Poly (lactic acid) or polylactide (PLA) is a commercial biobased, biodegradable, biocompatible, compostable and non-toxic polymer that has competitive material and processing costs and desirable mechanical properties. Thereby, it can be considered favorably for biomedical applications and as the most promising substitute for petroleum-based polymers in a wide range of commodity and engineering applications. However, PLA has some significant shortcomings such as low melt strength, slow crystallization rate, poor processability, high brittleness, low toughness, and low service temperature, which limit its applications. To overcome these limitations, blending PLA with other polymers is an inexpensive approach that could also tailor the final properties of PLA-based products. During the last two decades, researchers investigated the synthesis, processing, properties, and development of various PLA-based blend systems including miscible blends of poly l-lactide (PLLA) and poly d-lactide (PDLA), which generate stereocomplex crystals, binary immiscible/miscible blends of PLA with other thermoplastics, multifunctional ternary blends using a third polymer or fillers such as nanoparticles, as well as PLA-based blend foam systems. This article reviews all these investigations and compares the syntheses/processing-morphology-properties interrelationships in PLA-based blends developed so far for various applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“PBAT is an aliphatic-aromatic copolyester [2,3], which is biodegradable, highly flexible and designed for film extrusion [4,5].”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“Compared with PBAT, PLA exhibits attractive mechanical and physical properties such as high tensile strength and modulus [4].”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“PBAT is an aliphatic-aromatic copolyester [2,3], which is biodegradable, highly flexible and designed for film extrusion [4,5].”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“PBAT is an aliphatic-aromatic copolyester [2,3], which is biodegradable, highly flexible and designed for film extrusion [4,5].”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“However, PLA suffers from its brittleness and low toughness at ambient conditions [4], due to its molecular structure with a relatively rigid backbone and small methyl side groups.”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“It has also been described that different compatibilizers also influence the mechanical properties of the PLA/PHB blend [181].”
From Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review (2023) · cites this paper as [181]
Citations
Cites
Items 601–724 of 724
Oliaei, E., & Kaffashi, B. (2016) · Polymer · doi:10.1016/j.polymer.2016.09.092 · Cited by 33
Facile Fabrication of 100% Bio-based and Degradable Ternary Cellulose/PHBV/PLA Composites
Qiang, T., Wang, J., & Wolcott, M. P. (2018) · Materials · doi:10.3390/ma11020330 · Cited by 33
Shape memory polymer hybrids of SBS/dl-PLA and their shape memory effects
Zhang, H., Chen, Z., Zheng, Z., Zhu, X., & Wang, H. (2012) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2012.10.006 · Cited by 32
Stereocomplexation and morphology of enantiomeric poly(lactic acid)s with moderate‐molecular‐weight
Wang, Y., & Mano, J. F. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.27260 · Cited by 32
Bolay, N. L., Lamure, A., Leis, N. G., & Subhani, A. (2012) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2012.03.005 · Cited by 32
Bitinis, N., Fortunati, E., Verdejo, R., Armentano, I., Torre, L., Kenny, J. M., & López-Manchado, M. Á. (2014) · Applied Clay Science · doi:10.1016/j.clay.2014.02.024 · Cited by 31
Miscibility and phase behavior of poly(D,L-lactide)/poly(p-vinylphenol) blends
Zhang, L., Goh, S. H., & Lee, S. Y. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19981024)70:4 · Cited by 31
Kucharczyk, P., Otgonzu, O., Kitano, T., Kovalcik, A., Kreuh, D., Cvelbar, U., Sedlařík, V., & Sáha, P. (2012) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2012.709296 · Cited by 31
The effects of a polyol on the damping properties of EVM/PLA blends
Shi, X., Li, Q., Fu, G., & Jia, L. (2013) · Polymer Testing · doi:10.1016/j.polymertesting.2013.10.007 · Cited by 31
Ma, P., Hristova‐Bogaerds, D. G., Schmit, P., Goossens, H., & Lemstra, P. J. (2012) · Polymer International · doi:10.1002/pi.4204 · Cited by 31
Rheological and morphological properties of thermoplastic olefin blends containing nanosilica
Maani, A., & Carreau, P. J. (2016) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/j.jnnfm.2016.01.017 · Cited by 30
Self-citationXu, P., Ma, P., Hoch, M., Arnoldi, E., Cai, X., Dong, W., & Chen, M. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.05.010 · Cited by 30
Zhang, R., Xu, W., & Jiang, F. (2012) · Fibers and Polymers · doi:10.1007/s12221-012-0571-4 · Cited by 30
Bao, D., Liao, X., He, T., Yang, Q. Y., & Li, G. (2013) · Journal of Polymer Research · doi:10.1007/s10965-013-0290-6 · Cited by 30
Lv, Z., Zhao, N. R., Wu, Z., Zhu, C., & Li, Q. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b02233 · Cited by 30
Copolymer P(BS-co-LA) Enhanced Compatibility of PBS/PLA Composite
Zhang, W., Xu, Y., Wang, P., Hong, J., Liu, J., Ji, J., & Chu, P. K.-H. (2018) · Journal of Polymers and the Environment · doi:10.1007/s10924-018-1180-0 · Cited by 29
Salehiyan, R., Ray, S. S., & Ojijo, V. O. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800349 · Cited by 29
Samthong, C., Seemork, J., Nobukawa, S., Yamaguchi, M., Praserthdam, P., & Somwangthanaroj, A. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41415 · Cited by 29
Zou, H., Yi, C., Wang, L., & Xu, W. (2009) · Polymer Bulletin · doi:10.1007/s00289-009-0191-3 · Cited by 29
Kimble, L. D., & Bhattacharyya, D. (2014) · International Journal of Polymeric Materials · doi:10.1080/00914037.2014.945203 · Cited by 29
Nyambo, C., Misra, M., & Mohanty, A. K. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6393-3 · Cited by 29
Yuryev, Y., Mohanty, A. K., & Misra, M. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.10.011 · Cited by 29
Sedlařík, V., Otgonzul, O., Kitano, T., Kovalcik, A., Hrabalova, M., Junkar, I., Cvelbar, U., Mozetič, M., & Sáha, P. (2011) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2011.610265 · Cited by 28
Shi, X., Wang, L., Kang, Y., Qin, J., Li, J., Zhang, H., Fan, X., Liu, Y., & Zhang, G. (2018) · Journal of Polymer Research · doi:10.1007/s10965-018-1620-5 · Cited by 28
Kucharczyk, P., Sedlařík, V., Miskolczi, N., Szakacs, H., & Kitano, T. (2012) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684411434150 · Cited by 28
Zhou, L., Zhao, G., & Jiang, W. J. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42297 · Cited by 28
Müller, U. (1996) · Journal of Macromolecular Science Part A · doi:10.1080/10601329608010852 · Cited by 28
Pavia, F. C., Carrubba, V. L., & Brucato, V. (2012) · Polymer Bulletin · doi:10.1007/s00289-012-0861-4 · Cited by 27
Ran, X., Jia, Z., Han, C., Yang, Y., & Dong, L. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.31701 · Cited by 27
Biodegradable foams of poly(lactic acid)/starch. II. Cellular structure and water resistance
Zhang, J., & Sun, X. S. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26697 · Cited by 27
Phase identification and interfacial transitions in ternary polymer blends by ToF-SIMS
Ravati, S., Poulin, S., Piyakis, K., & Favis, B. D. (2014) · Polymer · doi:10.1016/j.polymer.2014.09.013 · Cited by 27
Processing and characterization of poly(lactic acid) blended with polycarbonate and chain extender
Srithep, Y., Rungseesantivanon, W., Hararak, B., & Suchiva, K. (2014) · Journal of Polymer Engineering · doi:10.1515/polyeng-2013-0309 · Cited by 27
Porous poly( L ‐lactic acid)/poly(ethylene glycol) blend films
Nakane, K., Hata, Y., Morita, K., Ogihara, T., & Ogata, N. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20959 · Cited by 27
Choe, I., Lee, J. H., Yu, J. H., & Yoon, J. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40329 · Cited by 27
Abdolrasouli, M. H., Nazockdast, H., Sadeghi, G. M. M., & Kaschta, J. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41300 · Cited by 27
Wu, J., Kuo, M. C., & Chen, C. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42378 · Cited by 26
Singla, R. K., Maiti, S. N., & Ghosh, A. K. (2016) · RSC Advances · doi:10.1039/c5ra24897c · Cited by 26
Improving transparency of incompatible polymer blends by reactive compatibilization
Zhang, W.-Y., Gui, Z., Lu, C., Cheng, S.-J., Cai, D., & Gao, Y. (2013) · Materials Letters · doi:10.1016/j.matlet.2012.10.060 · Cited by 26
Xu, L., & Huang, H. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36910 · Cited by 26
Li, K., Cui, Z., Sun, X., Turng, L., & Huang, H. (2011) · Journal of Biobased Materials and Bioenergy · doi:10.1166/jbmb.2011.1182 · Cited by 26
Samthong, C., Deetuam, C., Yamaguchi, M., Praserthdam, P., & Somwangthanaroj, A. (2015) · Polymer Engineering and Science · doi:10.1002/pen.24246 · Cited by 26
Ebadi‐Dehaghani, H., Khonakdar, H. A., Barikani, M., Jafari, S. H., Wagenknecht, U., & Heinrich, G. (2016) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2016.1151475 · Cited by 26
Assembling copper nanowires at the interface and in discrete phases in PLA-based polymer blends
Dil, E. J., Arjmand, M., Li, Y., Sundararaj, U., & Favis, B. D. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.09.053 · Cited by 26
Mechanical and Thermal Properties of Poly(Lactic Acid)/Starch/Montmorillonite Biodegradable Blends
Ren, J., Liu, Z., & Ren, T. (2007) · Polymers and Polymer Composites · doi:10.1177/096739110701500806 · Cited by 26
As’habi, L., Jafari, S. H., Khonakdar, H. A., Kretzschmar, B., Wagenknecht, U., & Heinrich, G. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39209 · Cited by 25
Zhao, H., Yan, X., Zhao, G., & Guo, Z. (2016) · Polymer Engineering and Science · doi:10.1002/pen.24323 · Cited by 25
Anakabe, J., Zaldua, A. M., Eceiza, A., & Arbelaiz, A. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43935 · Cited by 25
Miscibility Criterion in Polymer Blends and its Determination
Arrighi, V., Cowie, J. M. G., Fuhrmann, S., & Youssef, A. (2010) · doi:10.1002/9783527805204.ch5 · Cited by 25
High performance poly (lactic acid)/bio-polyamide11 through controlled chain mobility
Heshmati, V., & Favis, B. D. (2017) · Polymer · doi:10.1016/j.polymer.2017.07.009 · Cited by 24
Pivsa‐Art, W., Pivsa‐Art, S., Fujii, K., Nomura, K., Ishimoto, K., Aso, Y., Yamane, H., & Ohara, H. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41856 · Cited by 24
Damping Properties of Ethylene-Vinyl Acetate Rubber/Polylactic Acid Blends
He, X., Qu, M. H., & Shi, X. (2016) · Journal of Materials Science and Chemical Engineering · doi:10.4236/msce.2016.43003 · Cited by 24
Electrospun fibers of poly(ethylene terephthalate) blended with poly(lactic acid)
Li, K., Mao, B., & Cebe, P. (2013) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-013-3583-4 · Cited by 23
Structure and Properties of Ultradrawn Polylactide/Thermoplastic Polyurethane Elastomer Blends
Feng, F., Zhao, X., & Ye, L. (2011) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2010.518889 · Cited by 23
Rheological, Thermal, and Foaming Behaviors of Different Polylactide Grades
Nofar, M. (2018) · International Journal of Material Science and Research · doi:10.18689/ijmsr-1000103 · Cited by 23
Self-citationHazer, B., Baysal, B. M., Köseoğlu, A. G., Beşırlı, N., & Taşkın, E. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0406-1 · Cited by 23
Neppalli, R., Causin, V., Marigo, A., Meincken, M., Hartmann, P. C., & van Reenen, A. J. (2013) · Polymer · doi:10.1016/j.polymer.2013.08.046 · Cited by 23
Jang, M. G., Lee, Y. K., & Kim, W. N. (2015) · Macromolecular Research · doi:10.1007/s13233-015-3129-7 · Cited by 23
Nishida, M., Ichihara, H., Watanabe, H., Fukuda, N., & Ito, H. (2014) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2014.11.010 · Cited by 22
Effects of heat treatment on the damping of EVM/PLA blends modified with polyols
Shi, X., Li, Q., & Aige, Z. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.02.008 · Cited by 22
Zuza, E., Lejardi, A., Ugartemendia, J. M., Monasterio, N., Meaurio, E., & Sarasua, J.-R. (2008) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200800443 · Cited by 22
Gui, Z., Zhang, W.-Y., Lu, C., & Cheng, S.-J. (2013) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2012.720180 · Cited by 22
Improvement in impact resistance of polylactic acid by masticated and compatibilized natural rubber
Pattamaprom, C., Chareonsalung, W., Teerawattananon, C., Ausopron, S., Prachayawasin, P., & Puyvelde, P. V. (2016) · Iranian Polymer Journal · doi:10.1007/s13726-015-0411-7 · Cited by 22
Influence of compatibilizer on the structure properties of polylactic acid/natural rubber blends
Mohammad, N. N. B., Arsad, A., Rahmat, A. R., Sani, N. S. A., & Mohsin, M. E. A. (2016) · Polymer Science Series A · doi:10.1134/s0965545x16020164 · Cited by 21
Tsou, C., Kao, B.-J., Yang, M., Suen, M., Lee, Y., Chen, J., Yao, W.-H., Lin, S., Tsou, C., Huang, S., et al. (2015) · Bio-Medical Materials and Engineering · doi:10.3233/bme-151300 · Cited by 21
Preparation and properties of poly(lactic acid)/cellulolytic enzyme lignin/PGMA ternary blends
Ouyang, W. Z., Huang, Y., Luo, H. J., & Wang, D. S. (2012) · Chinese Chemical Letters · doi:10.1016/j.cclet.2011.11.023 · Cited by 21
Auliawan, A., & Woo, E. M. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36761 · Cited by 21
Auliawan, A., & Woo, E. M. (2011) · Polymer Composites · doi:10.1002/pc.21194 · Cited by 21
Mathurosemontri, S., Auwongsuwan, P., Nagai, S., & Hamada, H. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.07.131 · Cited by 20
Phase Structure of Compatibilized Poly(Lactic Acid)/Linear Low-Density Polyethylene Blends
Su, Z., Li, Q., Liu, Y., Xu, H., Guo, W., & Wu, C. (2009) · Journal of Macromolecular Science Part B · doi:10.1080/00222340902956327 · Cited by 20
Morphology and rheology on the blends of PLA/CMPS
Shin, B. Y., Jo, G. S., Kang, K. S., Lee, T. J., Kim, B. S., Lee, S. I., & Song, J. S. (2007) · Macromolecular Research · doi:10.1007/bf03218790 · Cited by 20
Properties of acrylonitrile butadiene rubber (NBR)/poly(lactic acid) (PLA) blends and their foams
Han, D.-H., Choi, M., Jeong, J., Choi, K., & Kim, H. (2016) · Composite Interfaces · doi:10.1080/09276440.2016.1170518 · Cited by 20
Sangeetha, V. H., Valapa, R. B., Nayak, S. K., & Varghese, T. O. (2016) · RSC Advances · doi:10.1039/c6ra13366e · Cited by 20
Chen, R.-H., Huang, X., Wang, M., & Jin, G. (2016) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2016.1166001 · Cited by 20
Miscibility study of solution cast blends of poly(lactic acid) and poly(vinyl butyral)
Khurma, J. R., Rohindra, D. R., & Devi, R. (2005) · South Pacific journal of natural and applied sciences · doi:10.1071/sp05004 · Cited by 19
Enzymatic degradation of poly( D,L ‐lactide) and its blends with poly(vinyl acetate)
Mahalik, J. P., & Madras, G. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23817 · Cited by 19
Liewchirakorn, P., Aht‐Ong, D., & Chinsirikul, W. (2017) · Packaging Technology and Science · doi:10.1002/pts.2321 · Cited by 19
Buddhiranon, S., Kim, N., & Kyu, T. (2011) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201100042 · Cited by 18
Feng, L., Bian, X., Cui, Y., Chen, Z., Li, G., & Chen, X. (2013) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201200696 · Cited by 18
Urquijo, J., Dagréou, S., Guerrica‐Echevarría, G., & Eguiazábal, J. I. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43815 · Cited by 18
Wu, J., Wu, C., Kuo, M. C., & Tsai, Y. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0755-x · Cited by 18
Synergistic Effects of Chain Extender and Nanoclay on the Crystallization Behaviour of Polylactide
Nofar, M. (2018) · International Journal of Material Science and Research · doi:10.18689/ijmsr-1000101 · Cited by 18
Self-citationWu, C.-P., Wang, C.-C., & Chen, C.-Y. (2015) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2014.974274 · Cited by 17
Effect of alkyl-chain-modified lignin in the PLA matrix
Kim, S., Oh, S., Lee, J., Ahn, N., Roh, H., Cho, J.-W., Chun, B.-C., & Park, J. (2014) · Fibers and Polymers · doi:10.1007/s12221-014-2458-z · Cited by 17
Morphology, Rheology, and Mechanical Properties of Polylactide/Poly(Ethylene-co-octene) Blends
Li, D., Shentu, B., & Weng, Z. (2011) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2011.557617 · Cited by 17
Wang, B., Zhao, X., & Wang, L. (2013) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2012.762671 · Cited by 16
Lai, S., Lan, Y., Wu, W., & Wang, Y. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42322 · Cited by 16
Biocompatibility of a Novel Poly(butyl succinate) and Polylactic Acid Blend
Kun, H., Zhang, W., Liu, X., & Xiubin, Y. (2012) · ASAIO Journal · doi:10.1097/mat.0b013e31824709ee · Cited by 16
Compatibilisation of various PLA/thermoplastic elastomer blends with diisocyanate coupling agent
Vuillaume, P. Y., Vachon, A., Grey, W., Pépin, K., & Zhang, C. J. (2018) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1080/14658011.2018.1439716 · Cited by 15
Kim, M. W., Hong, S. M., Lee, D., Park, K., Kang, T. J., & Youn, J. R. (2010) · Advanced Composite Materials · doi:10.1163/092430409x12605406698471 · Cited by 15
Zhong, Z., Ying, S., Fu, H., Ren, J., & Tianbin, R. (2011) · Polymers from Renewable Resources · doi:10.1177/204124791100200201 · Cited by 15
Lim, S.-W., Choi, M., Jeong, J., Park, E.-Y., & Ha, C. (2016) · Composite Interfaces · doi:10.1080/09276440.2016.1175168 · Cited by 14
Wu, N., & Zhang, H. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42554 · Cited by 14
Effect of Degradation on the Mechanical Properties of Multiphase Polymer Blends: PHBV/PLLA
Iannace, S., Ambrosio, L., Huang, S. J., & Nicolais, L. (1995) · Journal of Macromolecular Science Part A · doi:10.1080/10601329508010301 · Cited by 14
Rezgui, F., G'Sell, C., Dahoun, A., Hiver, J. M., & Sadoun, T. (2010) · Polymer Engineering and Science · doi:10.1002/pen.21797 · Cited by 14
Physical Characteristics of PLLA/PMMA Blends and Their CO2 Blowing Foams
Yao, B., Nawaby, A. V., Liao, X., & Burk, R. C. (2007) · Journal of Cellular Plastics · doi:10.1177/0021955x07079209 · Cited by 13
Melt Blends of Poly(lactic acid)/Natural Rubber and Liquid Epoxidised Natural Rubber
Bijarimi, M., Sahrim, A. H., & Rasid, R. (2014) · UMP Institutional Repository (Universiti Malaysia Pahang) · Cited by 13
Lin, Z., Chen, C., Guan, Z., Xu, B., Li, X., & Huang, Z. (2012) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2012.680559 · Cited by 13
Yang, J., Feng, C., Chen, H., Zhang, N., Huang, T. K., & Wang, Y. (2016) · Polymer International · doi:10.1002/pi.5109 · Cited by 13
Rezgui, F., G'Sell, C., Dahoun, A., Hiver, J. M., & Sadoun, T. (2010) · Polymer Engineering and Science · doi:10.1002/pen.21796 · Cited by 12
Zou, H., Wang, L., Yi, C., & Gan, H. (2011) · Polymer International · doi:10.1002/pi.3087 · Cited by 12
Lin, S., & Cheng, Y. (2010) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2010.482078 · Cited by 12
Lai, S., Hung, K., Kao, H. C., Liu, L.-C., & Wang, X. F. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39437 · Cited by 11
Phenolic Resin-Induced Dynamically Vulcanized Polylactide/Natural Rubber Blends
Yuan, D., Chen, Z., Chen, K., Mou, W., & Chen, Y. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1132437 · Cited by 11
Wang, Y., Chiao, S., Lai, M. ‐., & Yang, S. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23374 · Cited by 10
Foaming and thermal characteristics of bio-based polylactic acid–thermoplastic polyurethane blends
Barmouz, M., & Behravesh, A. H. (2018) · Journal of Cellular Plastics · doi:10.1177/0021955x18793841 · Cited by 10
Influence of Nanoclay on the Properties of Thermoplastic Starch/Poly(lactic acid) Blends
Paglicawan, M. A., Basilia, B. A., Navarro, M. T. V., & Emolaga, C. S. (2013) · Journal of Biobased Materials and Bioenergy · doi:10.1166/jbmb.2013.1276 · Cited by 9
Structural evolution of poly(lactic acid)/poly(ethylene oxide)/unmodified clay upon ambient ageing
Derho, J., Soulestin, J., & Krawczak, P. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40426 · Cited by 8
Fan, X., Ruan, J., Chen, Q., Chen, J., Zhongcheng, Z., & Zou, J. (2011) · Journal of Macromolecular Science Part B · doi:10.1080/00222341003652260 · Cited by 8
二軸延伸によって作成したポリブチレンテレフタレート微細繊維を含有するポリ乳酸ミクロ多孔質フィルムのモルホロジー,構造,および性質
Samthong, C., Seemork, J., Nobukawa, S., Yamaguchi, M., Piyasan, P., & Somwangthanaroj, A. (2015) · Journal of Applied Polymer Science · Cited by 8
Foaming and Damping Properties of Ethylene Vinyl-Acetate Copolymer/Polylactic Acid Blends
Jia, L., Fu, G., & Shi, X. (2014) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2014.998556 · Cited by 7
Preparation and Properties of Polylactide/Poly(ethylene-co-octene)/nano-SiO2 Ternary Composites
Li, D., Shentu, B., & Weng, Z. (2012) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2012.659633 · Cited by 6
Effects of Fillers on the Damping Property of Ethylene Vinyl-Acetate/Polylactic Acid Blends
Shi, X., Jia, L., Ma, Y., & Li, C. (2016) · Journal of Materials Science and Chemical Engineering · doi:10.4236/msce.2016.42010 · Cited by 6
Chun-yan, L., Chi-xing, Z., & Yu, W. (2012) · Acta Polymerica Sinica · doi:10.3724/sp.j.1105.2012.12145 · Cited by 6
ポリ(乳酸)とアクリロニトリル‐ブタジエン‐スチレンの相溶化したブレンドの統計的最適化【Powered by NICT】
Vadori, R., Manjusri, M., & Amar, K. M. (2017) · Journal of Applied Polymer Science · Cited by 6
Pagnoulle, C., & Jérôme, R. (2000) · Macromolecular Symposia · doi:10.1002/1521-3900(200001)149:1 · Cited by 5
Tsuji, H., & Ikada, Y. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19980118)67:3 · Cited by 4
Yoon, Y., Plummer, C. J. G., & Månson, J. E. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9275-7 · Cited by 4
Study on the Mechenical Properties of PPC/PLA Blends Modified by POSS
Chen, Y., Peng, Y., Liu, W. Y., Zeng, G. S., Li, X. G., & Yan, X. H. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.741.28 · Cited by 4
Liu, C., Zhou, C., & Yu, W. (2012) · Cited by 4
Davoodi, S., Oliaei, E., Davachi, S. M., Hejazi, I., Seyfi, J., Heidari, B. S., & Ebrahimi, H. (2016) · RSC Advances · doi:10.1039/c6ra90040b · Cited by 4
Kovaļovs, A., Jelinska, N., Kalniņš, M., & Chate, A. K. (2016) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/111/1/012006 · Cited by 3
Schmidt (2001) · doi:10.1002/1099-0488(20010201)39:3
Drumright, R. E., Gruber, P. R., & Henton, D. E. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23
Research works printed but not linked: 7
- Loomis, 1990, Polylactide stereocomplexes, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 31, 55
- Park, 1999, Biodegradable polymer blends of poly (lactid acid) and starch, Korea Polym. J., 7, 93
- Leadprathom, 2010, Compatibilized polylactic acid/thermoplastic starch by reactive blend, J. Met. Mater. Miner., 20, 87
- Armentano, 2015, Processing and characterization of plasticized PLA/PHB blends for biodegradable multiphase systems, Express Polym Lett, 9, 583, 10.3144/expresspolymlett.2015.55 · DOI
- Gonzalez-Ausejo, 2017, Assessing the thermoformability of poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/poly (acid lactic) blends compatibilized with diisocyanates, Polym. Test., 62, 235, 10.1016/j.polymertesting.2017.06.026 · DOI
- Riley, 2003, Washington C, Langmuir, 19
- Seck, 2010, Designed biodegradable hydrogel structures prepared by stereolithography using poly(ethylene glycol)/poly(d,l-lactide)-based resins, J. Control. Release, 148, 34, 10.1016/j.jconrel.2010.07.111 · DOI
Cited by
Sorted by citations
Enzymes’ Power for Plastics Degradation
Tournier, V., Duquesne, S., Guillamot, F., Cramail, H., Taton, D., Marty, A., & André, I. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00644 · Cited by 623
The Effect of Nanofillers on the Functional Properties of Biopolymer-Based Films: A Review
Jamróz, E., Kulawik, P., & Kopel, P. (2019) · Polymers · doi:10.3390/polym11040675 · Cited by 521
Super tough poly(lactic acid) blends: a comprehensive review
Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465
Extrusion-Based 3D Printing Applications of PLA Composites: A Review
Tümer, E. H., & Erbil, H. Y. (2021) · Coatings · doi:10.3390/coatings11040390 · Cited by 493
Yanat, M., & Schroën, K. G. P. H. (2021) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2021.104849 · Cited by 460
Metadata
- Authors
- Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C.
- Affiliations
- Istanbul Technical University (TR)
- Research Center for High Performance Polymer and Composite Systems (CA)
- Corresponding author
- Nofar, Mohammadreza
- Venue
- International Journal of Biological Macromolecules
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 125
- Pages
- 307-360
- ISSN
- 0141-8130 (ISSN-L)
- OpenAlex
- W2904736796
- Cited by
- 780
- References
- 732
- Citations by year
- 2026: 69 · 2025: 94 · 2024: 123 · 2023: 149 · 2022: 95 · 2021: 120 · 2020: 98 · 2019: 32
- FWCI
- 4.13
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- International Journal of Biological Macromolecules (publishedVersion)
- PubMed (publishedVersion)
- Istanbul Technical University Academic Open Archive (Istanbul Technical University) (submittedVersion)
- PolyPublie (École Polytechnique de Montréal) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- polylactic acid, PLA blends, biodegradable polymers, poly(L-lactic acid), poly(D-lactide), stereocomplex crystals, immiscible polymer blends, miscible polymer blends, ternary mixtures, polymer nanocomposites, polymer processing, crystallization, morphology-property relationship, biomedical applications, petroleum substitute
- MeSH terms
- Biocompatible Materials, Biopolymers, Crystallization, Polyesters, Stereoisomerism, Nanocomposites, Mechanical Phenomena, Chemical Phenomena, Polymerization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
