The DOI matches its Crossref record; 724 of the 732 references it cites were found in a registry or an index.
Poly (lactic acid) blends: Processing, properties and applications
Abstract
Poly (lactic acid) or polylactide (PLA) is a commercial biobased, biodegradable, biocompatible, compostable and non-toxic polymer that has competitive material and processing costs and desirable mechanical properties. Thereby, it can be considered favorably for biomedical applications and as the most promising substitute for petroleum-based polymers in a wide range of commodity and engineering applications. However, PLA has some significant shortcomings such as low melt strength, slow crystallization rate, poor processability, high brittleness, low toughness, and low service temperature, which limit its applications. To overcome these limitations, blending PLA with other polymers is an inexpensive approach that could also tailor the final properties of PLA-based products. During the last two decades, researchers investigated the synthesis, processing, properties, and development of various PLA-based blend systems including miscible blends of poly l-lactide (PLLA) and poly d-lactide (PDLA), which generate stereocomplex crystals, binary immiscible/miscible blends of PLA with other thermoplastics, multifunctional ternary blends using a third polymer or fillers such as nanoparticles, as well as PLA-based blend foam systems. This article reviews all these investigations and compares the syntheses/processing-morphology-properties interrelationships in PLA-based blends developed so far for various applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“PBAT is an aliphatic-aromatic copolyester [2,3], which is biodegradable, highly flexible and designed for film extrusion [4,5].”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“Compared with PBAT, PLA exhibits attractive mechanical and physical properties such as high tensile strength and modulus [4].”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“PBAT is an aliphatic-aromatic copolyester [2,3], which is biodegradable, highly flexible and designed for film extrusion [4,5].”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“PBAT is an aliphatic-aromatic copolyester [2,3], which is biodegradable, highly flexible and designed for film extrusion [4,5].”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“However, PLA suffers from its brittleness and low toughness at ambient conditions [4], due to its molecular structure with a relatively rigid backbone and small methyl side groups.”
From Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties (2020) · cites this paper as [4]
In the citing paper
“It has also been described that different compatibilizers also influence the mechanical properties of the PLA/PHB blend [181].”
From Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review (2023) · cites this paper as [181]
Citations
Cites
Items 201–400 of 724
Zhang, X., & Zhang, Y. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.12.073 · Cited by 145
Wang, Y., Chen, K., Xu, C., & Chen, Y. (2015) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5b06244 · Cited by 145
Fracture micromechanisms of bioabsorbable PLLA/PCL polymer blends
Todo, M., Park, S. D., Takayama, T., & Arakawa, K. (2006) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2006.05.021 · Cited by 144
Ojijo, V. O., Ray, S. S., & Sadiku, E. R. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am301842e · Cited by 144
Wang, L., Lee, R. E., Wang, G., Chu, R. K. M., Zhao, J., & Park, C. B. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.07.024 · Cited by 143
Nofar, M., Heuzey, M., Carreau, P. J., & Kamal, M. R. (2016) · Polymer · doi:10.1016/j.polymer.2016.06.044 · Cited by 142
Self-citationA novel technology to manufacture biodegradable polylactide bead foam products
Nofar, M., Ameli, A., & Park, C. B. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.052 · Cited by 141
Self-citationFerri, J., García-García, D., Sánchez-Nácher, L., Fenollar, O., & GIMENO, R. A. B. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.03.082 · Cited by 141
Morphology and molten-state rheology of polylactide and polyhydroxyalkanoate blends
Gérard, T., & Budtova, T. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.03.015 · Cited by 140
Jiang, L., Liu, B., & Zhang, J. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie900576f · Cited by 140
Xiu, H., Huang, C., Bai, H., Jiang, J., Chen, F., Deng, H., Wang, K., Zhang, Q., & Fu, Q. (2014) · Polymer · doi:10.1016/j.polymer.2014.01.057 · Cited by 140
Quero, E., Müller, A. J., Signori, F., Coltelli, M., & Bronco, S. (2011) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201100437 · Cited by 139
Improvement of impact fracture properties of PLA/PCL polymer blend due to LTI addition
Takayama, T., & Todo, M. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-0137-1 · Cited by 137
Films of PLLA/PHBV: Thermal, morphological, and mechanical characterization
Ferreira, B. M. P., Zavaglia, C. A. C., & Duek, E. A. D. R. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11334 · Cited by 136
A poly(lactic acid)/calcium metaphosphate composite for bone tissue engineering
Jung, Y., Kim, S.-S., Kim, Y. H., Kim, S.-H., Kim, B.-S., Kim, S., Choi, C. Y., & Kim, S. H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.04.007 · Cited by 136
Arrieta, M. P., López, J., López, D., Kenny, J. M., & Peponi, L. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.12.058 · Cited by 136
DSC study of biodegradable poly(lactic acid) and poly(hydroxy ester ether) blends
Cao, X., MOHAMED, A. A., Gordon, S. H., Willett, J. L., & Sessa, D. J. (2003) · Thermochimica Acta · doi:10.1016/s0040-6031(03)00252-1 · Cited by 135
Coltelli, M., Maggiore, I. D., Bertoldo, M., Signori, F., Bronco, S., & Ciardelli, F. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28512 · Cited by 135
Bitinis, N., Verdejo, R., Maya, E. M., Espuche, É., Cassagnau, P., & López-Manchado, M. Á. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.11.018 · Cited by 134
Sarazin, P., & Favis, B. D. (2003) · Biomacromolecules · doi:10.1021/bm030034+ · Cited by 134
Ke, T., & Sun, X. S. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1758 · Cited by 134
Fan, Z., Xu, Z., Niu, H., Gao, N., Guan, Y., Li, C., Dang, Y., Cui, X., Liu, X.-Y., Duan, Y., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-19906-w · Cited by 134
Ying-Chen, Z., Wu, H., & Qiu, Y. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.007 · Cited by 133
Li, K., Peng, J., Turng, L., & Huang, H. (2011) · Advances in Polymer Technology · doi:10.1002/adv.20212 · Cited by 132
Kramschuster, A., & Turng, L. (2009) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31523 · Cited by 131
Al-Itry, R., Lamnawar, K., Maazouz, A., Billon, N., & Combeaud, C. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.05.001 · Cited by 130
Air filtration and antimicrobial capabilities of electrospun PLA/PHB containing ionic liquid
Nicosia, A., Gieparda, W., Foksowicz‐Flaczyk, J., Walentowska, J., Wesołek, D., Vazquez, B., PRODI, F., & Belosi, F. (2015) · Separation and Purification Technology · doi:10.1016/j.seppur.2015.09.037 · Cited by 130
Xu, Z., Zhang, Y., Wang, Z., Sun, N., & Li, H. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am201355j · Cited by 130
PLA / PHBV Films with Improved Mechanical and Gas Barrier Properties
Boufarguine, M., Guinault, A., Miquelard‐Garnier, G., & Sollogoub, C. (2012) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200285 · Cited by 129
Dil, E. J., & Favis, B. D. (2015) · Polymer · doi:10.1016/j.polymer.2015.08.046 · Cited by 128
Miscibility and Specific Interactions in Blends of Poly( l -Lactide) with Poly(Vinylphenol)
Meaurio, E., Zuza, E., & Sarasua, J.-R. (2005) · Macromolecules · doi:10.1021/ma047818f · Cited by 128
Juntuek, P., Ruksakulpiwat, Y., Chumsamrong, P., & Ruksakulpiwat, Y. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.36263 · Cited by 128
Experimental and theoretical analyses of mechanical properties of PP/PLA/clay nanocomposites
Ebadi‐Dehaghani, H., Khonakdar, H. A., Barikani, M., & Jafari, S. H. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.09.006 · Cited by 128
Bitinis, N., Verdejo, R., Bras, J., Fortunati, E., Kenny, J. M., Torre, L., & López-Manchado, M. Á. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.02.068 · Cited by 125
González‐Ausejo, J., Sánchez‐Safont, E., Lagaron, J. M., Balart, R., Cabedo, L., & Gámez‐Pérez, J. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.44806 · Cited by 125
Reactive Compatibilization of Polylactide/Polypropylene Blends
Xu, Y., Loi, J., Delgado, P. C., Topolkaraev, V. A., McEneany, R. J., Macosko, C. W., & Hillmyer, M. A. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b00882 · Cited by 124
Aslan, S., Calandrelli, L., Laurienzo, P., Malinconico, M., & Migliaresi, C. (2000) · Journal of Materials Science · doi:10.1023/a:1004787326273 · Cited by 123
Effect of chain extension on the properties of PLA/TPS blends
Li, H., & Huneault, M. A. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.33981 · Cited by 123
Bartczak, Z., Gałęski, A., Kowalczuk, M. M., Sobota, M., & Malinowski, R. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.07.033 · Cited by 123
Xiong, Z., Li, C., Ma, S., Feng, J., Yang, Y., Zhang, R., & Zhu, J. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.02.054 · Cited by 121
Laredo, E., Grimau, M., Bello, A., Wu, D., Zhang, Y., & Lin, D. P. (2010) · Biomacromolecules · doi:10.1021/bm100135n · Cited by 120
Evidence of a dual network/spherulitic crystalline morphology in PLA stereocomplexes
Saeidlou, S., Huneault, M. A., Li, H., Sammut, P., & Park, C. B. (2012) · Polymer · doi:10.1016/j.polymer.2012.10.030 · Cited by 120
Toughness decrease of PLA‐PHBHHx blend films upon surface‐confined photopolymerization
Rasal, R. M., & Hirt, D. E. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32009 · Cited by 120
Maroufkhani, M., Katbab, A. A., Liu, W., & Zhang, J. (2017) · Polymer · doi:10.1016/j.polymer.2017.03.025 · Cited by 120
Biocompatible shape memory polymer actuators with high force capabilities
Song, J. J., Chang, H. H., & Naguib, H. E. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.03.067 · Cited by 119
Tough Polylactide Graft Copolymers
Theryo, G., Jing, F., Pitet, L. M., & Hillmyer, M. A. (2010) · Macromolecules · doi:10.1021/ma101155p · Cited by 119
Suksut, B., & Deeprasertkul, C. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0278-9 · Cited by 119
Coltelli, M., Bronco, S., & Chinea, C. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.015 · Cited by 119
La Mantia, F. P., Botta, L., Morreale, M., & Scaffaro, R. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.10.017 · Cited by 118
Iannace, S., Ambrosio, L., Huang, S. J., & Nicolais, L. (1994) · Journal of Applied Polymer Science · doi:10.1002/app.1994.070541017 · Cited by 117
Ultratough Co-Continuous PLA/PA11 by Interfacially Percolated Poly(ether-b-amide)
Zolali, A. M., Heshmati, V., & Favis, B. D. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b02310 · Cited by 117
You, Y., Youk, J. H., Lee, S. W., Min, B.-M., Lee, S. J., & Park, W. H. (2005) · Materials Letters · doi:10.1016/j.matlet.2005.10.007 · Cited by 116
Yu, F., & Huang, H. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.06.001 · Cited by 116
Ojijo, V. O., Ray, S. S., & Sadiku, E. R. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201850m · Cited by 114
Qiu, J., Xing, C., Cao, X., Wang, H., Wang, L., Zhao, L., & Li, Y. (2013) · Macromolecules · doi:10.1021/ma401084y · Cited by 114
Rheological and foaming behavior of linear and branched polylactides
Najafi, N., Heuzey, M., Carreau, P. J., Therriault, D., & Park, C. B. (2014) · Rheologica Acta · doi:10.1007/s00397-014-0801-3 · Cited by 114
Self-citationCompatibilization of immiscible poly(l-lactide) and low density polyethylene blends
Kim, Y. F., Choi, C. N., Kim, Y. D., Lee, K. Y., & Lee, M. (2004) · Fibers and Polymers · doi:10.1007/bf02875524 · Cited by 114
Xiao, H., Lü, W., & Yeh, J. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29800 · Cited by 113
Sakai, F., Nishikawa, K., Inoue, Y., & Yazawa, K. (2009) · Macromolecules · doi:10.1021/ma901547a · Cited by 113
Fabrication of poly-DL-lactide/polyethylene glycol scaffolds using the gas foaming technique
Ji, C., Annabi, N., Hosseinkhani, M., Sivaloganathan, S., & Dehghani, F. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.09.028 · Cited by 113
Nuzzo, A., Bilotti, E., Peijs, T., Acierno, D., & Filippone, G. (2014) · Polymer · doi:10.1016/j.polymer.2014.07.036 · Cited by 113
Carmona, V. B., Corrêa, A. C., Marconcini, J. M., & Mattoso, L. H. C. (2014) · Journal of Polymers and the Environment · doi:10.1007/s10924-014-0666-7 · Cited by 113
Review on morphology development of immiscible blends in confined shear flow
Puyvelde, P. V., Vananroye, A., Cardinaels, R., & Moldenaers, P. (2008) · Polymer · doi:10.1016/j.polymer.2008.08.055 · Cited by 113
Schwach, E., Six, J., & Avérous, L. (2008) · Journal of Polymers and the Environment · doi:10.1007/s10924-008-0107-6 · Cited by 112
Yu, P., Mi, H., Huang, A., Geng, L., Chen, B., Kuang, T., Mou, W.-J., & Peng, X. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b00477 · Cited by 112
Biresaw, G., & Carriere, C. J. (2001) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.1067 · Cited by 111
Lee, J. B., Lee, Y. K., Choi, G. D., Na, S. W., Park, T. S., & Kim, W. N. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.12.019 · Cited by 111
Jain, S., Reddy, M. M., Mohanty, A. K., Misra, M., & Ghosh, A. K. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000063 · Cited by 111
Nofar, M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.147 · Cited by 111
Self-citationWang, N., Yu, J., Chang, P. R., & Ma, X. (2007) · Starch - Stärke · doi:10.1002/star.200700617 · Cited by 111
Preparation and Characterization of Poly(Lactic Acid)‐g‐Maleic Anhydride + Starch Blends
Orozco, V. H., Brostow, W., Chonkaew, W., & López, B. L. (2009) · Macromolecular Symposia · doi:10.1002/masy.200950309 · Cited by 111
Samuel, C., Cayuela, J., Barakat, I., Müller, A. J., Raquez, J., & Dúbois, P. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am403443m · Cited by 110
Bitinis, N., Fortunati, E., Verdejo, R., Bras, J., Kenny, J. M., Torre, L., & López-Manchado, M. Á. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.03.091 · Cited by 110
Biodegradable Composite Foams of PLA and PHBV Using Subcritical CO2
Richards, E. V., Rizvi, R. R., Chow, A., & Naguib, H. E. (2008) · Journal of Polymers and the Environment · doi:10.1007/s10924-008-0110-y · Cited by 110
Yokesahachart, C., & Yoksan, R. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.07.020 · Cited by 109
Blending of poly(lactic acid) and starches containing varying amylose content
Ke, T., Sun, S. X., & Seib, P. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12617 · Cited by 109
Nofar, M., Tabatabaei, A., Ameli, A., & Park, C. B. (2013) · Polymer · doi:10.1016/j.polymer.2013.09.044 · Cited by 109
Self-citationLi, S., Liu, L., Garreau, H., & Vert, M. (2003) · Biomacromolecules · doi:10.1021/bm025748j · Cited by 108
Yoo, T. W., Yoon, H. G., Choi, S. J., Kim, M. S., Kim, Y. H., & Kim, W. N. (2010) · Macromolecular Research · doi:10.1007/s13233-010-0613-y · Cited by 108
Dong, W., He, M., Wang, H., Ren, F., Zhang, J., Zhao, X., & Li, Y. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00740 · Cited by 108
Mechanical and thermal properties of poly(lactic acid)/starch blends with dioctyl maleate
Zhang, J., & Sun, X. S. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.21078 · Cited by 107
Polymer alloys and blends: Recent advances
Favis, B. D. (1991) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450690303 · Cited by 107
Ko, S. W., Hong, M., Park, B. J., Gupta, R. K., Choi, H. J., & Bhattacharya, S. N. (2009) · Polymer Bulletin · doi:10.1007/s00289-009-0072-9 · Cited by 107
Yao, M., Deng, H., Mai, F., Wang, K., Zhang, Q., Chen, F., & Fu, Q. (2011) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2011.92 · Cited by 107
Bonartsev, A. P., Boskhomodgiev, A. P., Иорданский, А. Л., Bonartseva, G. A., Rebrov, A. V., Makhina, T. K., Мышкина, В. Л., Yakovlev, S. A., Filatova, E. A., Ivanov, E. A., et al. (2012) · Molecular Crystals and Liquid Crystals · doi:10.1080/15421406.2012.635982 · Cited by 106
Arrieta, M. P., López, J., López, D., Kenny, J. M., & Peponi, L. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.02.027 · Cited by 106
Interfacial tension of poly(lactic acid)/polystyrene blends
Biresaw, G., & Carriere, C. J. (2002) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10290 · Cited by 105
Interactions, structure and properties in poly(lactic acid)/thermoplastic polymer blends
Imre, B., Renner, K. E., & Pukánszky, B. (2013) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2014.2 · Cited by 105
Li, L., Huang, W., Wang, B., Wei, W., Gu, Q., & Chen, P. (2015) · Polymer · doi:10.1016/j.polymer.2015.05.024 · Cited by 105
Shi, Q., Chen, C., Gao, L., Jiao, L., Xu, H., & Guo, W. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.10.002 · Cited by 105
Choudhary, P., Mohanty, S., Nayak, S. K., & Unnikrishnan, L. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.33866 · Cited by 104
Ma, P., Spoelstra, A. B., Schmit, P., & Lemstra, P. J. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.01.016 · Cited by 104
Lee, S.-M., & Lee, J. W. (2005) · Cited by 104
Low cost carbon fibers from bio-renewable Lignin/Poly(lactic acid) (PLA) blends
Wang, S., Li, Y., Xiang, H., Zhou, Z., Chang, T., & Zhu, M. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2015.09.021 · Cited by 104
Non-isothermal crystallization of PET/PLA blends
Chen, H., Pyda, M., & Cebe, P. (2009) · Thermochimica Acta · doi:10.1016/j.tca.2009.04.023 · Cited by 103
Xiu, H., Bai, H., Huang, C., Xu, C. L., Li, X. Y., & Fu, Q. (2013) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2013.24 · Cited by 103
Khankrua, R., Pivsa‐Art, S., Hamada, H., & Suttiruengwong, S. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.04.019 · Cited by 102
Dil, E. J., Virgilio, N., & Favis, B. D. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.07.022 · Cited by 101
Zolali, A. M., & Favis, B. D. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00464 · Cited by 100
Najafi, N., Heuzey, M., Carreau, P. J., Therriault, D., & Park, C. B. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.11.003 · Cited by 99
Self-citationPLA maleation: an easy and effective method to modify the properties of PLA/PCL immiscible blends
Gardella, L., Calabrese, M., & Monticelli, O. (2014) · Colloid & Polymer Science · doi:10.1007/s00396-014-3328-3 · Cited by 99
Hao, X., Kaschta, J., Liu, X., Pan, Y., & Schubert, D. W. (2015) · Polymer · doi:10.1016/j.polymer.2015.10.037 · Cited by 99
Mittal, V., Akhtar, T., & Matsko, N. B. (2015) · Macromolecular Materials and Engineering · doi:10.1002/mame.201400332 · Cited by 97
Poly(Ethylene Glycol) as a Compatibilizer for Poly(Lactic Acid)/Thermoplastic Starch Blends
Ferrarezi, M. M. F., Taipina, M. D. O., da Silva, L. C. E., & Gonçalves, M. D. C. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0480-z · Cited by 97
Grande, R., & Carvalho, A. J. F. (2011) · Biomacromolecules · doi:10.1021/bm101227q · Cited by 97
Silane modified starch for compatible reactive blend with poly(lactic acid)
Jariyasakoolroj, P., & Chirachanchai, S. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.02.018 · Cited by 96
Eslami, H., & Kamal, M. R. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.38449 · Cited by 96
Self-citationHamad, K., Kaseem, M., & Déri, F. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-5179-8 · Cited by 96
Employing a novel bioelastomer to toughen polylactide
Kang, H., Qiao, B., Wang, R., Wang, Z., Zhang, L., Ma, J., & Coates, P. D. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.053 · Cited by 95
Thermal degradation and physical aging of poly(lactic acid) and its blends with starch
Acioli‐Moura, R., & Sun, X. S. (2008) · Polymer Engineering and Science · doi:10.1002/pen.21019 · Cited by 95
Bio‐plastics and elastomers from polylactic acid/thermoplastic polyurethane blends
Jašo, V., Cvetinov, M. J., Rakić, S., & Petrovìć, Z. S. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41104 · Cited by 95
Phuong, V. T., Coltelli, M., Cinelli, P., Cifelli, M., Verstichel, S., & Lazzeri, A. (2014) · Polymer · doi:10.1016/j.polymer.2014.06.070 · Cited by 94
Liao, H., & Wu, C.-S. (2009) · Materials Science and Engineering A · doi:10.1016/j.msea.2009.03.003 · Cited by 94
Ahmed, J., Varshney, S. K., Auras, R. A., & Hwang, S. W. (2010) · Journal of Food Science · doi:10.1111/j.1750-3841.2010.01809.x · Cited by 93
Effect of annealing on the thermal properties of poly (lactic acid)/starch blends
Lv, S., Gu, J., Cao, J., Tan, H., & Zhang, Y. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.12.022 · Cited by 93
Burt, H. M., Jackson, J. K., Bains, S. K., Liggins, R., Oktaba, A. M., Arsenault, A. L., & Hunter, W. L. (1995) · Cancer Letters · doi:10.1016/0304-3835(94)03614-o · Cited by 93
Water Vapor Permeability of Poly( L ‐lactide)/Poly( D ‐lactide) Stereocomplexes
Tsuji, H., & Tsuruno, T. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000071 · Cited by 92
PLLA/PMMA blends: A shear-induced miscibility with tunable morphologies and properties?
Samuel, C., Raquez, J., & Dúbois, P. (2013) · Polymer · doi:10.1016/j.polymer.2013.05.021 · Cited by 92
Lee, T., & Jeong, Y. G. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.08.019 · Cited by 92
de Arenaza, I. M., Meaurio, E., Coto, B., & Sarasua, J.-R. (2010) · Polymer · doi:10.1016/j.polymer.2010.07.018 · Cited by 92
Ferrero, B., Fombuena, V., Fenollar, O., Boronat, T., & Balart, R. (2014) · Polymer Composites · doi:10.1002/pc.23042 · Cited by 92
A mini review on the functional biomaterials based on poly (lactic acid) stereocomplex
Jing, Y., Quan, C., Liu, B., Jiang, Q., & Zhang, C. (2016) · Polymer Reviews · doi:10.1080/15583724.2015.1111380 · Cited by 92
Ji, D., Liu, Z., Lan, X., Wu, F., Xie, B., & Yang, M. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39580 · Cited by 91
Xiong, Z., Zhang, L., Ma, S., Yang, Y., Zhang, C., Tang, Z., & Zhu, J. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.01.038 · Cited by 91
Comparative assessment of miscibility and degradability on PET/PLA and PET/chitosan blends
Torres-Huerta, A. M., Palma‐Ramírez, D., Domínguez-Crespo, M. A., Ángel-López, D. D., & de la Fuente, D. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.10.016 · Cited by 91
Wang, X., Liu, W., Zhou, H., Liu, B., Li, H., Du, Z., & Zhang, C. (2013) · Polymer · doi:10.1016/j.polymer.2013.08.050 · Cited by 91
Gattin, R., Copinet, A., Bertrand, C., & Couturier, Y. (2002) · International Biodeterioration & Biodegradation · doi:10.1016/s0964-8305(02)00039-2 · Cited by 91
Lu, X. H., Wei, X., Huang, J., Li, Y., Zhang, G., He, G., Wang, M., & Qu, J. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie503092w · Cited by 91
Thermoplastic PVA/PLA Blends with Improved Processability and Hydrophobicity
Li, H.-Z., Chen, S., & Wang, Y. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie502531w · Cited by 91
Han, L., Han, C., Zhang, H., Chen, S., & Dong, L. (2012) · Polymer Composites · doi:10.1002/pc.22213 · Cited by 90
Wang, S., Ma, P., Wang, R., Wang, S., Zhang, Y., & Zhang, Y. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.03.026 · Cited by 89
Zakaria, Z., Islam, M. S., Hassan, A., Mohamad Haafiz, M. K., Arjmandi, R., Inuwa, I. M., & Hasan, M. (2013) · Advances in Materials Science and Engineering · doi:10.1155/2013/629092 · Cited by 89
Wang, Y., Chiao, S., Hung, T. ‐., & Yang, S. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36920 · Cited by 88
Chen, R., Abdelwahab, M. A., Misra, M., & Mohanty, A. K. (2014) · Journal of Polymers and the Environment · doi:10.1007/s10924-014-0704-5 · Cited by 88
Zhang, N., Zeng, C., Wang, L., & Ren, J. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0448-z · Cited by 87
You, Y., Lee, S. W., Youk, J. H., Min, B., Lee, S. J., & Park, W. H. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.04.015 · Cited by 87
Lins, L. C., Livi, S., Duchet‐Rumeau, J., & Gérard, J. (2015) · RSC Advances · doi:10.1039/c5ra10241c · Cited by 86
Chen, Y., Chen, K., Wang, Y., & Xu, C. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b02195 · Cited by 86
Fan, Z., Fu, M., Xu, Z., Zhang, B., Li, Z., Li, H., Zhou, X., Liu, X., Duan, Y., Lin, P., et al. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00760 · Cited by 86
Porous membranes of PLLA–PCL blend for tissue engineering applications
Lebourg, M., Suay, J., & Ribelles, J. L. G. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.04.033 · Cited by 85
Zuo, Y. F., Gu, J., Qiao, Z., Tan, H., Cao, J., & Zhang, Y. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.08.038 · Cited by 85
Zhang, J., Sato, H., Furukawa, T., Tsuji, H., Noda, I., & Ozaki, Y. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp065233c · Cited by 85
Compatibility and mechanical properties of blends of polystyrene with biodegradable polyesters
Biresaw, G., & Carriere, C. J. (2003) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.020 · Cited by 84
Yuan, H., Liu, Z., & Ren, J. (2009) · Polymer Engineering and Science · doi:10.1002/pen.21287 · Cited by 84
Miscibility and phase structure of binary blends of poly( L ‐lactide) and poly(vinyl alcohol)
Shuai, X., He, Y. Q., Asakawa, N., & Inoue, Y. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1493 · Cited by 84
Chang, H. C., Sun, T., Sultana, N., Lim, M. M., Khan, T. H., & Ismail, A. F. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.12.074 · Cited by 84
Microcellular extrusion foaming of poly(lactide)/poly(butylene adipate-co-terephthalate) blends
Pilla, S., Kim, S. G., Auer, G. K., Gong, S., & Park, C. B. (2009) · Materials Science and Engineering C · doi:10.1016/j.msec.2009.10.010 · Cited by 83
Xu, C., Yuan, D., Fu, L., & Chen, Y. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.05.005 · Cited by 83
Preparation and characterization of compatible thermoplastic dry starch/poly(lactic acid)
Wang, N., Yu, J., & Ma, X. (2008) · Polymer Composites · doi:10.1002/pc.20399 · Cited by 83
Song, J. J., Chang, H. H., & Naguib, H. E. (2014) · Polymer · doi:10.1016/j.polymer.2014.09.062 · Cited by 82
Yoon, J., Oh, S.-H., Kim, M.-N., Chin, I.-J., & Kim, Y. (1999) · Polymer · doi:10.1016/s0032-3861(98)00463-7 · Cited by 81
Hydrolytic degradation of PLLA/PCL microporous membranes prepared by freeze extraction
Gaona, L. A., Ribelles, J. L. G., Perilla, J. E., & Lebourg, M. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.031 · Cited by 81
MOHAMED, A. A., Gordon, S. H., & Biresaw, G. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26783 · Cited by 81
Shi, X., Qin, J., Wang, L., Ren, L., Rong, F., Li, D., Wang, R., & Zhang, G. (2018) · RSC Advances · doi:10.1039/c8ra01570h · Cited by 81
Ke, T., & Sun, X. S. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12112 · Cited by 81
Botlhoko, O. J., Ramontja, J., & Ray, S. S. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.05.025 · Cited by 81
Pezzin, A. P. T., van Ekenstein, G. O. R. A., Zavaglia, C. A. C., ten Brinke, G., & Duek, E. A. D. R. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.11984 · Cited by 80
Reactive compatibilization of PLA/TPU blends with a diisocyanate
Kemaloglu, S., Reyes, E. A., Rastogi, S., & Özkoç, G. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.40251 · Cited by 80
Evaluation of PHBHHx and PHBV/PLA fibers used as medical sutures
He, Y., Hu, Z., Ren, M., Ding, C., Chen, P., Gu, Q., & Wu, Q. (2013) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-013-5073-4 · Cited by 80
Preparation and characterization of starch/poly(l-lactic acid) hybrid foams
Preechawong, D., Peesan, M., Supaphol, P., & Rujiravanit, R. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2004.10.003 · Cited by 80
Hong, H., Wei, J., Yuan, Y., Chen, F., Wang, J., Qu, X., & Liu, C. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.33675 · Cited by 80
Wagner, A., Poursorkhabi, V., Mohanty, A. K., & Misra, M. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc5000495 · Cited by 80
Milligrams to kilograms: An evaluation of mixers for reactive polymer blending
Sundararaj, U., Macosko, C. W., Nakayama, A., & Inoue, T. (1995) · Polymer Engineering and Science · doi:10.1002/pen.760350113 · Cited by 79
Enzymatic and Thermal Degradation of Poly(ε-caprolactone), Poly( d , l -lactide), and Their Blends
Sivalingam, G., Vijayalakshmi, S. P., & Madras, G. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie049589r · Cited by 79
Effect of P(lLA-co-?CL) on the compatibility and crystallization behavior of PCL/PLLA blends
Kim, C.-H., Cho, K. Y., Choi, E., & Park, J.-K. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000705)77:1 · Cited by 79
Liu, J., Huihua, J., & Chen, L. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0438-1 · Cited by 79
Yuan, D., Chen, K., Xu, C., Chen, Z., & Chen, Y. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.07.044 · Cited by 79
Zhao, Q., Ding, Y. M., Yang, B., Ning, N., & Fu, Q. (2012) · Polymer Testing · doi:10.1016/j.polymertesting.2012.11.012 · Cited by 79
Biorenewable blends of polyamide‐11 and polylactide
Patel, R. P., Ruehle, D. A., Dorgan, J. R., Halley, P. J., & Martin, D. J. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23692 · Cited by 78
Nofar, M., Heuzey, M.-C., Carreau, P. J., Kamal, M. R., & Randall, J. (2016) · Journal of Rheology · doi:10.1122/1.4953446 · Cited by 77
Self-citationEffects of compatibilizers on the mechanical properties of ABS/PLA composites
Jo, M. Y., Ryu, Y. J., Ko, J. H., & Yoon, J. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36732 · Cited by 77
Razavi, M., Asadi, V., Mehdijabbar, P., Khonakdar, H. A., & Jafari, S. H. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.09.064 · Cited by 77
Morphology, rheological behavior, and thermal stability of PLA/PBSA/POSS composites
Wang, R., Wang, S., & Zhang, Y. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30333 · Cited by 76
Processing and characterization of solid and foamed injection-molded polylactide with talc
Ameli, A., Jahani, D., Nofar, M., Jung, P. U., & Park, C. B. (2013) · Journal of Cellular Plastics · doi:10.1177/0021955x13481993 · Cited by 76
Self-citationYuan, Z., & Favis, B. D. (2003) · Biomaterials · doi:10.1016/j.biomaterials.2003.08.060 · Cited by 75
Dong, W., Ma, P., Wang, S., Chen, M., Cai, X., & Zhang, Y. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.06.033 · Cited by 75
Monticelli, O., Calabrese, M., Gardella, L., Fina, A., & Gioffredi, E. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.06.021 · Cited by 75
Wang, H., Sun, X. S., & Seib, P. A. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021139903549 · Cited by 75
Peponi, L., Sessini, V., Arrieta, M. P., Navarro-Baena, I., Sonseca, Á., Dominici, F., Giménez, E., Torre, L., Tercjak, A., López, D., et al. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.02.019 · Cited by 75
Balakrishnan, H., Hassan, A., & Wahit, M. U. (2010) · Journal of Elastomers & Plastics · doi:10.1177/0095244310362403 · Cited by 75
Torres-Huerta, A. M., Ángel-López, D. D., Domínguez-Crespo, M. A., Palma‐Ramírez, D., Perales-Castro, M. E., & Flores‐Vela, A. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1132433 · Cited by 75
Yu, Y., Cheng, Y., Ren, J., Cao, E., Fu, X., & Guo, W. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.41808 · Cited by 74
Ding, W., Kuboki, T., Wong, A., Park, C. B., & Sain, M. M. (2015) · RSC Advances · doi:10.1039/c5ra16901a · Cited by 74
Melt Rheology of Poly(Lactic Acid)/Low Density Polyethylene Polymer Blends
Hamad, K., Kaseem, M., & Deri, F. (2011) · Advances in Chemical Engineering and Science · doi:10.4236/aces.2011.14030 · Cited by 73
Ultralow Percolation Thresholds in Ternary Cocontinuous Polymer Blends
Zhang, J., Ravati, S., Virgilio, N., & Favis, B. D. (2007) · Macromolecules · doi:10.1021/ma0716480 · Cited by 73
Thermal, rheological and microstructural characterisation of commercial biodegradable polyesters
Cock, F., Cuadri, A. A., García‐Morales, M., & Partal, P. (2013) · Polymer Testing · doi:10.1016/j.polymertesting.2013.03.015 · Cited by 73
Sun, M., Kingham, P. J., Reid, A. J., Armstrong, S. J., Terenghi, G., & Downes, S. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32681 · Cited by 73
Davachi, S. M., Heidari, B. S., Hejazi, I., Seyfi, J., Oliaei, E., Farzaneh, A., & Rashedi, H. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.08.037 · Cited by 73
Compatibilized Polymer Blends Based on PDLLA and PCL for Application in Bioartificial Liver
Calandrelli, L., Calarco, A., Laurienzo, P., Malinconico, M., Petillo, O., & Peluso, G. (2008) · Biomacromolecules · doi:10.1021/bm7013087 · Cited by 72
Zolali, A. M., & Favis, B. D. (2017) · Polymer · doi:10.1016/j.polymer.2017.02.093 · Cited by 72
de Oliveira, J. E., de Moraes, E. A. B., Marconcini, J. M., Mattoso, L. H. C., Glenn, G. M., & Medeiros, E. S. D. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39061 · Cited by 72
Ojijo, V. O., Cele, H., & Ray, S. S. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201100042 · Cited by 71
Tsuji, H., & Muramatsu, H. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1651 · Cited by 71
Chiu, H., Huang, S.-Y., Chen, Y., Kuo, M.-T., Chiang, T., Chang, C.-Y., & Wang, Y. (2013) · International Journal of Polymer Science · doi:10.1155/2013/951696 · Cited by 71
Comparison of abiotic and biotic degradation of PDLLA, PCL and partially miscible PDLLA/PCL blend
Fukushima, K., Feijoo, J. L., & Yang, M. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.011 · Cited by 71
Potential role of nanofillers as compatibilizers in immiscible PLA/LDPE Blends
Vrsaljko, D., Macut, D., & Kovačević, V. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41414 · Cited by 71
Preparation and characterization of thermoplastic starches and their blends with poly(lactic acid)
Yang, Y., Tang, Z., Xiong, Z., & Zhu, J. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.03.053 · Cited by 71
Zembouai, I., Bruzaud, S., Kaci, M., Benhamida, A., Corre, Y., Grohens, Y., Taguet, A., & Lopez‐Cuesta, J. (2013) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0626-7 · Cited by 71
Effect of Compatibilizer on PLA/PP Blend for Injection Molding
Pivsa‐Art, S., Kord-Sa-Ard, J., Pivsa‐Art, W., Wongpajan, R., O-Charoen, N., Pavasupree, S., & Hamada, H. (2016) · Energy Procedia · doi:10.1016/j.egypro.2016.05.046 · Cited by 71
Lu, X. H., Tang, L., Wang, L., Zhao, J., Li, D., Wu, Z., & Xiao, P. (2016) · Polymer Testing · doi:10.1016/j.polymertesting.2016.06.025 · Cited by 71
Flagged first, then by citations
8 of the 732 references couldn’t be matched to a known paper.
Research works printed but not linked: 7
- Loomis, 1990, Polylactide stereocomplexes, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 31, 55
- Park, 1999, Biodegradable polymer blends of poly (lactid acid) and starch, Korea Polym. J., 7, 93
- Leadprathom, 2010, Compatibilized polylactic acid/thermoplastic starch by reactive blend, J. Met. Mater. Miner., 20, 87
- Armentano, 2015, Processing and characterization of plasticized PLA/PHB blends for biodegradable multiphase systems, Express Polym Lett, 9, 583, 10.3144/expresspolymlett.2015.55 · DOI
- Gonzalez-Ausejo, 2017, Assessing the thermoformability of poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/poly (acid lactic) blends compatibilized with diisocyanates, Polym. Test., 62, 235, 10.1016/j.polymertesting.2017.06.026 · DOI
- Riley, 2003, Washington C, Langmuir, 19
- Seck, 2010, Designed biodegradable hydrogel structures prepared by stereolithography using poly(ethylene glycol)/poly(d,l-lactide)-based resins, J. Control. Release, 148, 34, 10.1016/j.jconrel.2010.07.111 · DOI
Cited by
Sorted by citations
Enzymes’ Power for Plastics Degradation
Tournier, V., Duquesne, S., Guillamot, F., Cramail, H., Taton, D., Marty, A., & André, I. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00644 · Cited by 623
The Effect of Nanofillers on the Functional Properties of Biopolymer-Based Films: A Review
Jamróz, E., Kulawik, P., & Kopel, P. (2019) · Polymers · doi:10.3390/polym11040675 · Cited by 521
Super tough poly(lactic acid) blends: a comprehensive review
Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465
Extrusion-Based 3D Printing Applications of PLA Composites: A Review
Tümer, E. H., & Erbil, H. Y. (2021) · Coatings · doi:10.3390/coatings11040390 · Cited by 493
Yanat, M., & Schroën, K. G. P. H. (2021) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2021.104849 · Cited by 460
Metadata
- Authors
- Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C.
- Affiliations
- Istanbul Technical University (TR)
- Research Center for High Performance Polymer and Composite Systems (CA)
- Corresponding author
- Nofar, Mohammadreza
- Venue
- International Journal of Biological Macromolecules
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 125
- Pages
- 307-360
- ISSN
- 0141-8130 (ISSN-L)
- OpenAlex
- W2904736796
- Cited by
- 780
- References
- 732
- Citations by year
- 2026: 69 · 2025: 94 · 2024: 123 · 2023: 149 · 2022: 95 · 2021: 120 · 2020: 98 · 2019: 32
- FWCI
- 4.13
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- International Journal of Biological Macromolecules (publishedVersion)
- PubMed (publishedVersion)
- Istanbul Technical University Academic Open Archive (Istanbul Technical University) (submittedVersion)
- PolyPublie (École Polytechnique de Montréal) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- polylactic acid, PLA blends, biodegradable polymers, poly(L-lactic acid), poly(D-lactide), stereocomplex crystals, immiscible polymer blends, miscible polymer blends, ternary mixtures, polymer nanocomposites, polymer processing, crystallization, morphology-property relationship, biomedical applications, petroleum substitute
- MeSH terms
- Biocompatible Materials, Biopolymers, Crystallization, Polyesters, Stereoisomerism, Nanocomposites, Mechanical Phenomena, Chemical Phenomena, Polymerization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
