Poly (lactic acid) blends: Processing, properties and applications

The return of a forgotten polymer—Polycaprolactone in the 21st century

Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033

A Literature Review of Poly(Lactic Acid)

Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707

An Overview of Polylactides as Packaging Materials

Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454

Polymer Interface and Adhesion

Wu, S. (2017) · Routledge eBooks · doi:10.1201/9780203742860 · Cited by 3,391

Processing technologies for poly(lactic acid)

Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766

Poly(lactic acid) modifications

Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204

Polymer blends and composites from renewable resources

Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107

Poly(lactic acid) crystallization

Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606

Stereocomplex formation between enantiomeric poly(lactides)

Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409

Large-scale production, properties and commercial applications of polylactic acid polymers

Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366

Poly(lactic acid) fiber: An overview

Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360

Release of tetracycline hydrochloride from electrospun poly(ethylene-co-vinylacetate), poly(lactic acid), and a blend

Kenawy, E., Bowlin, G. L., Mansfield, K. F., Layman, J. M., Simpson, D. G., Sanders, E. H., & Wnek, G. E. (2002) · Journal of Controlled Release · doi:10.1016/s0168-3659(02)00041-x · Cited by 1,312

Stereocomplex Formation between Enantiomeric Poly(lactide)s

박은하, & 진인주 (2010) · 한국고분자학회 학술대회 연구논문 초록집 · Cited by 1,084

Dispersion of fillers and the electrical conductivity of polymer blends filled with carbon black

Sumita, M., Sakata, K., Asai, S., Miyasaka, K., & Nakagawa, H. (1991) · Polymer Bulletin · doi:10.1007/bf00310802 · Cited by 1,083

Linear rheology of viscoelastic emulsions with interfacial tension

Palierne, J. (1990) · Rheologica Acta · doi:10.1007/bf01331356 · Cited by 1,043

Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications

Tsuji, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700275 · Cited by 1,021

Polyhydroxyalkanoate (PHA): Review of synthesis, characteristics, processing and potential applications in packaging

Bugnicourt, E., Cinelli, P., Lazzeri, A., & Álvarez, V. A. (2014) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2014.82 · Cited by 984

Biodegradable and Bio‐Based Polymers: Future Prospects of Eco‐Friendly Plastics

Iwata, T. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410770 · Cited by 964

Study of Biodegradable Polylactide/Poly(butylene adipate- co -terephthalate) Blends

Jiang, L., Wolcott, M. P., & Zhang, J. (2005) · Biomacromolecules · doi:10.1021/bm050581q · Cited by 956

Improvement of thermal stability, rheological and mechanical properties of PLA, PBAT and their blends by reactive extrusion with functionalized epoxy

Al-Itry, R., Lamnawar, K., & Maazouz, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.028 · Cited by 906

A novel degradable polycaprolactone networks for tissue engineering

Kweon, H. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00370-8 · Cited by 694

Investigation of the structure of solution grown crystals of lactide copolymers by means of chemical reactions

Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Aktuelle Probleme der Polymer-Physik · doi:10.1007/978-3-642-47050-9_24 · Cited by 683

Solid Wettability from Surface Energy Components: Relevance to Pickering Emulsions

Binks, B. P., & Clint, J. H. (2002) · Langmuir · doi:10.1021/la011420k · Cited by 679

Biodegradation behavior of poly(butylene adipate-co-terephthalate) (PBAT), poly(lactic acid) (PLA), and their blend under soil conditions

Weng, Y., Jin, Y., Meng, Q.-Y., Wang, L., Zhang, M., & Wang, Y. (2013) · Polymer Testing · doi:10.1016/j.polymertesting.2013.05.001 · Cited by 596

Preparation and characterization of biodegradable PLA polymeric blends

Chen, C.-C., Chueh, J.-Y., Tseng, H., Huang, H.-M., & Lee, S.-Y. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00466-0 · Cited by 583

Poly(lactic acid) blends in biomedical applications

Saini, P. K., Arora, M., & Kumar, M. N. V. R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.014 · Cited by 569

Stereocomplex formation between enantiomeric poly(lactic acid)s. XI. Mechanical properties and morphology of solution-cast films

Tsuji, H., & Ikada, Y. (1999) · Polymer · doi:10.1016/s0032-3861(99)00004-x · Cited by 545

Poly (lactic acid) foaming

Nofar, M., & Park, C. B. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.04.001 · Cited by 544

Poly(lactic acid) stereocomplexes: A decade of progress

Tsuji, H. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.017 · Cited by 535

Crystallization and Melting Behavior of Polylactides

Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525

Morphology and properties of compatibilized polylactide/thermoplastic starch blends

Huneault, M. A., & Li, H. (2006) · Polymer · doi:10.1016/j.polymer.2006.11.023 · Cited by 508

Thermal degradation of poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) and their blends upon melt processing

Signori, F., Coltelli, M.-B., & Bronco, S. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.10.004 · Cited by 503

Mechanical Properties of Poly(lactic acid)/Starch Composites Compatibilized by Maleic Anhydride

Zhang, J., & Sun, X. S. (2004) · Biomacromolecules · doi:10.1021/bm0400022 · Cited by 495

High molecular weight poly(l-lactide) and poly(ethylene oxide) blends: thermal characterization and physical properties

Nijenhuis, A. J., Colstee, E., Grijpma, D. W., & Pennings, A. J. (1996) · Polymer · doi:10.1016/s0032-3861(96)00455-7 · Cited by 480

Molecular Dynamics Studies of Polyethylene Oxide and Polyethylene Glycol: Hydrodynamic Radius and Shape Anisotropy

Lee, H., Venable, R. M., MacKerell, A. D., & Pastor, R. W. (2008) · Biophysical Journal · doi:10.1529/biophysj.108.133025 · Cited by 474

The Case for Polylactic Acid as a Commodity Packaging Plastic

Sinclair, R. (1996) · Journal of Macromolecular Science Part A · doi:10.1080/10601329608010880 · Cited by 467

Effect of glycidyl methacrylate (GMA) on the thermal, mechanical and morphological property of biodegradable PLA/PBAT blend and its nanocomposites

Kumar, M., Mohanty, S., Nayak, S. K., & Parvaiz, M. R. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.075 · Cited by 457

Thermal, mechanical and morphological characterization of plasticized PLA–PHB blends

Abdelwahab, M. A., Flynn, A., Chiou, B., Imam, S., Orts, W. J., & Chiellini, E. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.05.036 · Cited by 456

Structure and properties for biomass-based polyester blends of PLA and PBS

Yokohara, T., & Yamaguchi, M. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.01.008 · Cited by 440

Stereocomplexed polylactides (Neo‐PLA) as high‐performance bio‐based polymers: their formation, properties, and application

Fukushima, K., & Kimura, Y. (2006) · Polymer International · doi:10.1002/pi.2010 · Cited by 438

Wetting of poly(l-lactic acid) and poly(dl-lactic-co-glycolic acid) foams for tissue culture

Mikos, A. G., Lyman, M. D., Freed, L. E., & Langer, R. (1994) · Biomaterials · doi:10.1016/0142-9612(94)90197-x · Cited by 409

Influence of chain extender on mechanical, thermal and morphological properties of blown films of PLA/PBAT blends

Arruda, L. C., Magaton, M., Bretas, R. E. S., & Ueki, M. M. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.02.005 · Cited by 397

Super-tough poly(lactic acid) materials: Reactive blending with ethylene copolymer

Oyama, H. T. (2008) · Polymer · doi:10.1016/j.polymer.2008.12.025 · Cited by 392

Blending polylactic acid with polyhydroxybutyrate: The effect on thermal, mechanical, and biodegradation properties

Zhang, M., & Thomas, N. L. (2011) · Advances in Polymer Technology · doi:10.1002/adv.20235 · Cited by 391

Crystal structure of stereocomplex of poly(L-lactide) and poly(D-lactide)

Okihara, T., Tsuji, M., Kawaguchi, A., Katayama, K.-I., Tsuji, H., Hyon, S.-H., & Ikada, Y. (1991) · Journal of Macromolecular Science Part B · doi:10.1080/00222349108245788 · Cited by 384

Mechanical properties, morphology, and crystallization behavior of blends of poly(l-lactide) with poly(butylene succinate-co-l-lactate) and poly(butylene succinate)

Shibata, M., Inoue, Y., & Miyoshi, M. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.065 · Cited by 381

Water absorption and enzymatic degradation of poly(lactic acid)/rice starch composites

Yew, G. H., Yusof, A. M. M., Ishak, Z. A. M., & Ishiaku, U. S. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.04.006 · Cited by 375

Selective Localization of Multiwalled Carbon Nanotubes in Poly(ε-caprolactone)/Polylactide Blend

Wu, D., Zhang, Y., Zhang, M., & Yu, W. (2009) · Biomacromolecules · doi:10.1021/bm801183f · Cited by 372

Ternary PLA–PHB–Limonene blends intended for biodegradable food packaging applications

Arrieta, M. P., López, J., Hernández, A., & Rayón, E. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.11.009 · Cited by 372

Toughening of Polylactide by Melt Blending with a Biodegradable Poly(ether)urethane Elastomer

Li, Y., & Shimizu, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700027 · Cited by 371

Toughening of polylactide by melt blending with linear low‐density polyethylene

Anderson, K. S., Lim, S., & Hillmyer, M. A. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12462 · Cited by 362

Bionanocomposite films based on plasticized PLA–PHB/cellulose nanocrystal blends

Arrieta, M. P., Fortunati, E., Dominici, F., López, J., & Kenny, J. M. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.12.056 · Cited by 359

The effect of viscosity ratio on the morphology of polypropylene/polycarbonate blends during processing

Favis, B. D., & Chalifoux, J. ‐. (1987) · Polymer Engineering and Science · doi:10.1002/pen.760272105 · Cited by 356

Flammability properties of intumescent PLA including starch and lignin

Reti, C., Casetta, M., Duquesne, S., Bourbigot, S., & Delobel, R. (2008) · Polymers for Advanced Technologies · doi:10.1002/pat.1130 · Cited by 349

Fully Biodegradable and Biorenewable Ternary Blends from Polylactide, Poly(3-hydroxybutyrate-co-hydroxyvalerate) and Poly(butylene succinate) with Balanced Properties

Zhang, K., Mohanty, A. K., & Misra, M. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3004522 · Cited by 343

Reactive compatibilization of biodegradable blends of poly(lactic acid) and poly(ε-caprolactone)

Wang, L., Ma, W., Gross, R. A., & McCarthy, S. P. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00196-1 · Cited by 339

FILMS. THE SPREADING OF LIQUIDS AND THE SPREADING COEFFICIENT

Harkins, W. D., & Feldman, A. (1922) · Journal of the American Chemical Society · doi:10.1021/ja01433a001 · Cited by 338

Stereocomplex Crystallite Network in Asymmetric PLLA/PDLA Blends: Formation, Structure, and Confining Effect on the Crystallization Rate of Homocrystallites

Wei, X., Bao, R., Cao, Z.-Q., Yang, W. M., Xie, B., & Yang, M. (2014) · Macromolecules · doi:10.1021/ma402653a · Cited by 328

PLA-PHB/cellulose based films: Mechanical, barrier and disintegration properties

Arrieta, M. P., Fortunati, E., Dominici, F., Rayón, E., López, J., & Kenny, J. M. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.05.010 · Cited by 326

Super Toughened Poly(lactic acid) Ternary Blends by Simultaneous Dynamic Vulcanization and Interfacial Compatibilization

Liu, H., Chen, F., Liu, B., Estep, G., & Zhang, J. (2010) · Macromolecules · doi:10.1021/ma101108g · Cited by 325

Disintegrability under composting conditions of plasticized PLA–PHB blends

Arrieta, M. P., López, J., Rayón, E., & Jiménez, A. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.01.034 · Cited by 325

Interaction of Microstructure and Interfacial Adhesion on Impact Performance of Polylactide (PLA) Ternary Blends

Liu, H., Song, W., Chen, F., Guo, L. Q., & Zhang, J. (2011) · Macromolecules · doi:10.1021/ma1026934 · Cited by 321

The effect of crosslinking on the mechanical properties of polylactic acid/polycaprolactone blends

Semba, T., Kitagawa, K., Ishiaku, U. S., & Hamada, H. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23589 · Cited by 316

Physicochemical properties of PLA lignin blends

Gordobil, O., Egüés, I., Llano‐Ponte, R., & Labidi, J. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.01.002 · Cited by 314

Miscibility and biodegradability of blends of poly(lactic acid) and poly(vinyl acetate)

Gajria, A. M., Davé, V., Gross, R. A., & McCarthy, S. P. (1996) · Polymer · doi:10.1016/0032-3861(96)82913-2 · Cited by 306

Characterization of thermoplastic polyurethane/polylactic acid (TPU/PLA) tissue engineering scaffolds fabricated by microcellular injection molding

Mi, H., Salick, M. R., Jing, X., Jacques, B. R., Crone, W. C., Peng, X., & Turng, L. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.07.037 · Cited by 305

Biobased Polyamides: Recent Advances in Basic and Applied Research

Winnacker, M., & Rieger, B. (2016) · Macromolecular Rapid Communications · doi:10.1002/marc.201600181 · Cited by 304

The influence of block copolymer microstructure on the toughness of compatibilized polylactide/polyethylene blends

Anderson, K. S., & Hillmyer, M. A. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.047 · Cited by 300

Kraft lignin as filler in PLA to improve ductility and thermal properties

Gordobil, O., Delucis, R. D. Á., Egüés, I., & Labidi, J. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.01.055 · Cited by 299

Binary and ternary blends of polylactide, polycaprolactone and thermoplastic starch

Sarazin, P., Li, G., Orts, W. J., & Favis, B. D. (2007) · Polymer · doi:10.1016/j.polymer.2007.11.029 · Cited by 298

Multifunctional PLA–PHB/cellulose nanocrystal films: Processing, structural and thermal properties

Arrieta, M. P., Fortunati, E., Dominici, F., Rayón, E., López, J., & Kenny, J. M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.02.044 · Cited by 294

Optimization of Biodegradable Nanocomposites Based on aPLA/PCL Blends for Food Packaging Applications

Cabedo, L., Luis Feijoo, J., Pilar Villanueva, M., Lagarón, J. M., & Giménez, E. (2006) · Macromolecular Symposia · doi:10.1002/masy.200690017 · Cited by 289

Miscibility, crystallization and melting of poly(3-hydroxybutyrate)/ poly(l-lactide) blends

Blümm, E., & Owen, A. J. (1995) · Polymer · doi:10.1016/0032-3861(95)90987-d · Cited by 289

Crystallization, morphology, and mechanical behavior of polylactide/poly(ε‐caprolactone) blends

López‐Rodríguez, N., López-Arraiza, A., Meaurio, E., & Sarasua, J.-R. (2006) · Polymer Engineering and Science · doi:10.1002/pen.20609 · Cited by 288

Melt rheology of variable L -content poly(lactic acid)

Dorgan, J. R., Janzen, J., Clayton, M. P., Hait, S. B., & Knauss, D. M. (2005) · Journal of Rheology · doi:10.1122/1.1896957 · Cited by 283

Structure and properties of polylactide/natural rubber blends

Bitinis, N., Verdejo, R., Cassagnau, P., & López-Manchado, M. Á. (2011) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.05.016 · Cited by 281

Preparation, characterization and properties of binary and ternary blends with thermoplastic starch, poly(lactic acid) and poly(butylene adipate-co-terephthalate)

Ren, J., Fu, H., Ren, T., & Yuan, W. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.01.024 · Cited by 280

Enhanced thermal stability of poly(lactide)s in the melt by enantiomeric polymer blending

Tsuji, H., & Fukui, I. (2003) · Polymer · doi:10.1016/s0032-3861(03)00175-7 · Cited by 279

Strengthening blends of poly(lactic acid) and starch with methylenediphenyl diisocyanate

Wang, H., Sun, X. S., & Seib, P. A. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.2018 · Cited by 278

Mechanical study of PLA–PCL fibers during in vitro degradation

Vieira, A. C., Vieira, J. C., Ferra, J. M. M., Magalhães, F. D., Guedes, R. M., & Marques, A. T. (2010) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2010.12.006 · Cited by 273

Compatibility of biodegradable poly (lactic acid) (PLA) and poly (butylene succinate) (PBS) blends for packaging application

Bhatia, A., Gupta, R. K., Bhattacharya, S. N., & Choi, H. J. (2007) · RMIT Research Repository (RMIT University Library) · Cited by 272

Melt rheology of poly(lactic acid): Entanglement and chain architecture effects

Dorgan, J. R., Williams, J. S., & Lewis, D. N. (1999) · Journal of Rheology · doi:10.1122/1.551041 · Cited by 272

Selective Enzymatic Degradations of Poly( l -lactide) and Poly(ε-caprolactone) Blend Films

Liu, L., Li, S., Garreau, H., & Vert, M. (2000) · Biomacromolecules · doi:10.1021/bm000046k · Cited by 272

Improvement in toughness of poly(l-lactide) (PLLA) through reactive blending with acrylonitrile–butadiene–styrene copolymer (ABS): Morphology and properties

Li, Y., & Shimizu, H. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.12.010 · Cited by 270

Melt rheology of polylactide/poly(butylene adipate-co-terephthalate) blends

Gu, S.-Y., Zhang, K., Ren, J., & Zhan, H. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.01.017 · Cited by 269

Supertoughened Renewable PLA Reactive Multiphase Blends System: Phase Morphology and Performance

Zhang, K., Nagarajan, V., Misra, M., & Mohanty, A. K. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502337u · Cited by 267

Toughening modification of PLLA/PBS blends via in situ compatibilization

Wang, R., Wang, S., Zhang, Y., Wan, C., & Ma, P. (2008) · Polymer Engineering and Science · doi:10.1002/pen.21210 · Cited by 267

Effect of the addition of poly (D-lactic acid) on the thermal property of poly (L-lactic acid)

Yamane, H., & Sasai, K. (2003) · Polymer · doi:10.1016/s0032-3861(03)00092-2 · Cited by 266

Aging of poly(lactide)/poly(ethylene glycol) blends. Part 1. Poly(lactide) with low stereoregularity

Hu, Y., Rogunova, M., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00614-1 · Cited by 261

Selective Localization of Nanofillers: Effect on Morphology and Crystallization of PLA/PCL Blends

Wu, D., Lin, D., Zhang, J., Zhou, W., Zhang, M., Zhang, Y., Wang, D., & Lin, B. (2011) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201000579 · Cited by 260

Tailoring Impact Toughness of Poly(l-lactide)/Poly(ε-caprolactone) (PLLA/PCL) Blends by Controlling Crystallization of PLLA Matrix

Bai, H., Xiu, H., Gao, J., Deng, H., Zhang, Q., Yang, M., & Fu, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201564f · Cited by 260

Aging of poly(lactide)/poly(ethylene glycol) blends. Part 2. Poly(lactide) with high stereoregularity

Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00615-3 · Cited by 258

New approach on the development of plasticized polylactide (PLA): Grafting of poly(ethylene glycol) (PEG) via reactive extrusion

Hassouna, F., Raquez, J.-M., Addiego, F., Dubois, P., Toniazzo, V., & Ruch, D. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.08.001 · Cited by 257

Structure-properties of super-tough PLA alloy with excellent heat resistance

Hashima, K., Nishitsuji, S., & Inoue, T. (2010) · Polymer · doi:10.1016/j.polymer.2010.06.045 · Cited by 256

Increased impact strength of biodegradable poly(lactic acid)/poly(butylene succinate) blend composites by using isocyanate as a reactive processing agent

Harada, M., Ohya, T., Iida, K., Hayashi, H., Hirano, K., & Fukuda, H. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26717 · Cited by 256

Stereoselective Crystallization and Specific Interactions in Polylactides

Sarasua, J.-R., Rodríguez, N. L., Arraiza, A. L., & Meaurio, E. (2005) · Macromolecules · doi:10.1021/ma051266z · Cited by 254

Reactive extrusion of PLA, PBAT with a multi-functional epoxide: Physico-chemical and rheological properties

Al-Itry, R., Lamnawar, K., & Maazouz, A. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.06.013 · Cited by 253

In-situ compatibilization of poly(lactic acid) and poly(butylene adipate-co-terephthalate) blends by using dicumyl peroxide as a free-radical initiator

Ma, P., Cai, X., Zhang, Y., Wang, S., Dong, W., Chen, M., & Lemstra, P. J. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.01.025 · Cited by 252

Evaluation of PLA–lignin bioplastics properties before and after accelerated weathering

Spiridon, I., Leluk, K., Resmeriță, A.-M., & Darie-Niță, R. N. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.10.006 · Cited by 252

A new approach in compatibilization of the poly(lactic acid)/thermoplastic starch (PLA/TPS) blends

Akrami, M., Ghasemi, I., Azizi, H., Karrabi, M., & Seyedabadi, M. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.02.035 · Cited by 249

Toughening of Biodegradable Polylactide/Poly(butylene succinate-co-adipate) Blends via in Situ Reactive Compatibilization

Ojijo, V. O., Ray, S. S., & Sadiku, E. R. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400482f · Cited by 245

Surprising shape-memory effect of polylactide resulted from toughening by polyamide elastomer

Zhang, W., Chen, L., & Zhang, Y. (2009) · Polymer · doi:10.1016/j.polymer.2009.01.032 · Cited by 245

Compatibility characterization of poly(lactic acid)/poly(propylene carbonate) blends

Ma, X., Yu, J., & Wang, N. (2005) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.20669 · Cited by 242

Preparation and properties of biodegradable poly(lactic acid)/poly(butylene adipate-co-terephthalate) blend with glycidyl methacrylate as reactive processing agent

Zhang, N., Wang, Q., Ren, J., & Wang, L. (2008) · Journal of Materials Science · doi:10.1007/s10853-008-3049-4 · Cited by 241

Phase behavior and morphology in blends of poly( L ‐lactic acid) and poly(butylene succinate)

Park, J. W., & Im, S. S. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10923 · Cited by 241

Comparison of sorbitol and glycerol as plasticizers for thermoplastic starch in TPS/PLA blends

Li, H., & Huneault, M. A. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32956 · Cited by 240

Thermal, mechanical and electroactive shape memory properties of polyurethane (PU)/poly (lactic acid) (PLA)/CNT nanocomposites

Raja, M., Ryu, S. H., & Shanmugharaj, A. M. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.08.009 · Cited by 236

Production and characterization of PLA_PBS biodegradable blends reinforced with cellulose nanocrystals extracted from hemp fibres

Luzi, F., Fortunati, E., Jiménez, A., Puglia, D., Pezzolla, D., Gigliotti, G., Kenny, J. M., Chiralt, A., & Torre, L. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.01.045 · Cited by 236

Crystallization Kinetics of Linear and Long-Chain-Branched Polylactide

Nofar, M., Zhu, W., Park, C. B., & Randall, J. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie2011966 · Cited by 234

Miscibility, crystallization and morphology of poly(β-hydroxybutyrate)/poly(d,l-lactide) blends

Zhang, L., Xiong, C., & Deng, X. (1996) · Polymer · doi:10.1016/0032-3861(96)81093-7 · Cited by 233

Dynamically Vulcanized Biobased Polylactide/Natural Rubber Blend Material with Continuous Cross-Linked Rubber Phase

Chen, Y., Yuan, D., & Xu, C. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5004766 · Cited by 233

Biodegradable polymer blends of poly( L ‐lactic acid) and gelatinized starch

Park, J. W., Im, S. S., Kim, S. H., & Kim, Y. H. (2000) · Polymer Engineering and Science · doi:10.1002/pen.11384 · Cited by 227

Thermal degradation and biodegradability of poly (lactic acid)/corn starch biocomposites

Ohkita, T., & Lee, S. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23425 · Cited by 227

Influence of formamide and water on the properties of thermoplastic starch/poly(lactic acid) blends

Wang, N., Yu, J., Chang, P. R., & Ma, X. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.025 · Cited by 226

Toughening of poly(lactic acid) by ethylene-co-vinyl acetate copolymer with different vinyl acetate contents

Ma, P., Hristova‐Bogaerds, D. G., Goossens, H., Spoelstra, A. B., Zhang, Y., & Lemstra, P. J. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.10.015 · Cited by 224

Preparation and characterization of poly(lactic acid)/starch composites toughened with epoxidized soybean oil

Xiong, Z., Yang, Y., Feng, J., Zhang, X., Zhang, C., Tang, Z., & Zhu, J. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.09.007 · Cited by 222

Compatibilization Effect of Poly(ε-caprolactone)-b-poly(ethylene glycol) Block Copolymers and Phase Morphology Analysis in Immiscible Poly(lactide)/Poly(ε-caprolactone) Blends

Na, Y.-H., He, Y., Shuai, X., Kikkawa, Y., Doi, Y., & Inoue, Y. (2002) · Biomacromolecules · doi:10.1021/bm020050r · Cited by 219

Mechanical properties of poly(ε‐caprolactone) and poly(lactic acid) blends

Simões, C. L., Viana, J. C., & Cunha, A. M. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.29425 · Cited by 218

Polyethylene‐poly( L ‐lactide) diblock copolymers: Synthesis and compatibilization of poly( L ‐lactide)/polyethylene blends

Wang, Y., & Hillmyer, M. A. (2001) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.1254 · Cited by 214

Crystallinity and mechanical properties of optically pure polylactides and their blends

Sarasua, J. R., Arraiza, A. L., Balerdi, P., & Maiza, I. (2005) · Polymer Engineering & Science · doi:10.1002/pen.20331 · Cited by 214

Phase behavior and its viscoelastic response of polylactide/poly(ε-caprolactone) blend

Wu, D., Zhang, Y., Zhang, M., & Zhou, W. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.04.023 · Cited by 213

Phase separation in poly(ethylene glycol)/poly(lactic acid) blends

Younes, H., & Cohn, D. (1988) · European Polymer Journal · doi:10.1016/0014-3057(88)90013-4 · Cited by 212

Processing and characterization of plasticized PLA/PHB blends for biodegradable multiphase systems

Armentano, I., Fortunati, E., Burgos, N., Dominici, F., Luzi, F., Fiori, S., Jiménez, A., Yoon, K., Ahn, J. H., Kang, S., et al. (2015) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2015.55 · Cited by 212

Relevance of PEG in PLA-based blends for tissue engineering 3D-printed scaffolds

Serra, T., Ortiz-Hernandez, M., Engel, E., Planell, J. A., & Navarro, M. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.01.003 · Cited by 206

Miscibility and phase structure of binary blends of polylactide and poly(methyl methacrylate)

Zhang, G., Zhang, J., Wang, S., & Shen, D. (2002) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10353 · Cited by 206

Morphologies and mechanical properties of polylactide/thermoplastic polyurethane elastomer blends

Feng, F., & Ye, L. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32863 · Cited by 206

Miscibility and solid-state structures for blends of poly[(S)-lactide] with atactic poly[(R,S)-3-hydroxybutyrate]

Ohkoshi, I., Abe, H., & Doi, Y. (2000) · Polymer · doi:10.1016/s0032-3861(99)00781-8 · Cited by 205

Compatibility and phase structure of binary blends of poly(lactic acid) and glycidyl methacrylate grafted poly(ethylene octane)

Su, Z., Li, Q., Liu, Y., Hu, G., & Wu, C. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.04.028 · Cited by 203

Extruded PLA/clay nanocomposite foams blown with supercritical CO2

Keshtkar, M., Nofar, M., Park, C. B., & Carreau, P. J. (2014) · Polymer · doi:10.1016/j.polymer.2014.06.059 · Cited by 202

Stereocomplex formation between enantiomeric poly(lactic acid)s. 7. Phase structure of the stereocomplex crystallized from a dilute acetonitrile solution as studied by high-resolution solid-state carbon-13 NMR spectroscopy

Tsuji, H., Horii, F., Nakagawa, M., Ikada, Y., Odani, H., & Kitamaru, R. (1992) · Macromolecules · doi:10.1021/ma00042a011 · Cited by 202

Blends of aliphatic polyesters. I. Physical properties and morphologies of solution-cast blends from poly(DL-lactide) and poly(?-caprolactone)

Tsuji, H., & Ikada, Y. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960627)60:13 · Cited by 202

Development of high void fraction polylactide composite foams using injection molding: Mechanical and thermal insulation properties

Ameli, A., Jahani, D., Nofar, M., Jung, P. U., & Park, C. B. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.10.019 · Cited by 201

Development of flexible materials based on plasticized electrospun PLA–PHB blends: Structural, thermal, mechanical and disintegration properties

Arrieta, M. P., López, J., López, D., Kenny, J. M., & Peponi, L. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.10.036 · Cited by 200

Melting behavior and crystallization kinetics of starch and poly(lactic acid) composites

Ke, T., & Sun, X. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12162 · Cited by 200

Compatible and crystallization properties of poly(lactic acid)/poly(butylene adipate‐co‐terephthalate) blends

Yeh, J., Tsou, C., Huang, C., Chen, K., Wu, C., & Chai, W. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.30907 · Cited by 199

Blending poly(butylene succinate) with poly(lactic acid): Ductility and phase inversion effects

Deng, Y., & Thomas, N. L. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.08.029 · Cited by 198

Mechanical and bead foaming behavior of PLA-PBAT and PLA-PBSA blends with different morphologies

Nofar, M., Tabatabaei, A., Sojoudiasli, H., Park, C. B., Carreau, P. J., Heuzey, M.-C., & Kamal, M. R. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.03.031 · Cited by 197

Development and characterization of sugar palm starch and poly(lactic acid) bilayer films

Sanyang, M. L., Sapuan, S. M., Jawaid, M., Ishak, M. R., & Sahari, J. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.03.051 · Cited by 197

Properties of linear poly(lactic acid)/polyethylene glycol blends

Sungsanit, K., Kao, N., & Bhattacharya, S. N. (2011) · Polymer Engineering and Science · doi:10.1002/pen.22052 · Cited by 196

Plasticized Poly(lactic acid)–Poly(hydroxybutyrate) (PLA–PHB) Blends Incorporated with Catechin Intended for Active Food-Packaging Applications

Arrieta, M. P., Castro-López, M. D. M., Rayón, E., Barral-Losada, L. F., López-Vilariño, J. M., López, J., & González-Rodríguez, M. V. (2014) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf5029812 · Cited by 196

A study of morphological, thermal, rheological and barrier properties of Poly(3-hydroxybutyrate-Co-3-Hydroxyvalerate)/polylactide blends prepared by melt mixing

Zembouai, I., Kaci, M., Bruzaud, S., Benhamida, A., Corre, Y., & Grohens, Y. (2013) · Polymer Testing · doi:10.1016/j.polymertesting.2013.04.004 · Cited by 196

Extrusion Foaming of Semi‐Crystalline PLA and PLA/Thermoplastic Starch Blends

Mihai, M., Huneault, M. A., Favis, B. D., & Li, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700080 · Cited by 194

Flame Retardancy and Thermal Degradation of Intumescent Flame Retardant Poly(lactic acid)/Starch Biocomposites

Wang, X., Hu, Y. Z., Song, L., Xuan, S., Xing, W., Bai, Z., & Lu, H. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie1017157 · Cited by 194

Optimising Ductility of Poly(Lactic Acid)/Poly(Butylene Adipate-co-Terephthalate) Blends Through Co-continuous Phase Morphology

Deng, Y., Yu, C., Wongwiwattana, P., & Thomas, N. L. (2018) · Journal of Polymers and the Environment · doi:10.1007/s10924-018-1256-x · Cited by 193

Morphology and properties tuning of PLA/cellulose nanocrystals bio-nanocomposites by means of reactive functionalization and blending with PVAc

Pracella, M., Haque, M. M.-U., & Puglia, D. (2014) · Polymer · doi:10.1016/j.polymer.2014.06.071 · Cited by 193

Shape memory properties of melt-blended polylactic acid (PLA)/thermoplastic polyurethane (TPU) bio-based blends

Lai, S., & Lan, Y. (2013) · Journal of Polymer Research · doi:10.1007/s10965-013-0140-6 · Cited by 191

The effect of end groups of PEG on the crystallization behaviors of binary crystalline polymer blends PEG/PLLA

Lai, W., Liau, W., & Lin, T.-T. (2004) · Polymer · doi:10.1016/j.polymer.2004.03.003 · Cited by 191

(Co)polymers of L‐lactide, 2. Mechanical properties

Grijpma, D. W., & Pennings, A. J. (1994) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1994.021950516 · Cited by 191

Synthesis and characterization of TPO–PLA copolymer and its behavior as compatibilizer for PLA/TPO blends

Ho, C., Wang, C., Lin, C.-I., & Lee, Y. (2008) · Polymer · doi:10.1016/j.polymer.2008.06.054 · Cited by 190

Preparation and characterization of thermoplastic starch/PLA blends by one‐step reactive extrusion

Wang, N., Yu, J., & Ma, X. (2007) · Polymer International · doi:10.1002/pi.2302 · Cited by 190

Morphology and thermal degradation studies of melt-mixed poly(lactic acid) (PLA)/poly(ε-caprolactone) (PCL) biodegradable polymer blend nanocomposites with TiO2 as filler

Mofokeng, J. P., & Luyt, A. S. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.05.007 · Cited by 189

Model experiments concerning morphology development during the initial stages of polymer blending

Scott, C., & Macosko, C. W. (1991) · Polymer Bulletin · doi:10.1007/bf00587979 · Cited by 185

Continuous processing of low-density, microcellular poly(lactic acid) foams with controlled cell morphology and crystallinity

Wang, J., Zhu, W., Zhang, H., & Park, C. B. (2012) · Chemical Engineering Science · doi:10.1016/j.ces.2012.02.051 · Cited by 185

Effects of nano-/micro-sized additives on the crystallization behaviors of PLA and PLA/CO2 mixtures

Nofar, M., Tabatabaei, A., & Park, C. B. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.049 · Cited by 183

Factors influencing structure formation and phase size in an immiscible polymer blend of polycarbonate and polypropylene prepared by twin-screw extrusion

Favis, B. D., & Therrien, D. (1991) · Polymer · doi:10.1016/0032-3861(91)90429-m · Cited by 182

Miscibility of binary blends of poly[(R)-3-hydroxybutyric acid] and poly[(S)-lactic acid]

Koyama, N., & Doi, Y. (1997) · Polymer · doi:10.1016/s0032-3861(96)00685-4 · Cited by 182

Development of high void fraction polylactide composite foams using injection molding: Crystallization and foaming behaviors

Ameli, A., Nofar, M., Jahani, D., Rizvi, G. M., & Park, C. B. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.09.087 · Cited by 182

Toughness enhancement of poly(lactic acid) by melt blending with natural rubber

Jaratrotkamjorn, R., Khaokong, C., & Tanrattanakul, V. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.35617 · Cited by 181

Processing and characterization of solid and microcellular poly(lactic acid)/polyhydroxybutyrate-valerate (PLA/PHBV) blends and PLA/PHBV/Clay nanocomposites

Zhao, H., Cui, Z., Wang, X., Turng, L., & Peng, X. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.02.034 · Cited by 180

Super toughened biodegradable polylactide blends with non-linear copolymer interfacial architecture obtained via facile in-situ reactive compatibilization

Ojijo, V. O., & Ray, S. S. (2015) · Polymer · doi:10.1016/j.polymer.2015.10.038 · Cited by 179

Toughening of poly( L ‐lactide) by melt blending with rubbers

Ishida, S., Nagasaki, R., Chino, K., Dong, T., & Inoue, Y. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30134 · Cited by 177

Melt processed PLA/PCL blends: Effect of processing method on phase structure, morphology, and mechanical properties

Urquijo, J., Guerrica‐Echevarría, G., & Eguiazábal, J. I. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42641 · Cited by 176

Polylactic acid/polypropylene polyblend fibers for better resistance to degradation

Reddy, N., Nama, D., & Yang, Y. (2007) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.09.005 · Cited by 175

Designing multiple-shape memory polymers with miscible polymer blends: Evidence and origins of a triple-shape memory effect for miscible PLLA/PMMA blends

Samuel, C., Barrau, S., Lefebvre, J.-M., Raquez, J.-M., & Dubois, P. (2014) · Macromolecules · doi:10.1021/ma500846x · Cited by 175

Thermal, mechanical and rheological properties of polylactide toughened by expoxidized natural rubber

Zhang, C., Wang, W., Huang, Y., Pan, Y., Jiang, L., Dan, Y., Luo, Y., & Peng, Z. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.09.024 · Cited by 174

Effect of dissolved CO2 on the crystallization behavior of linear and branched PLA

Nofar, M., Zhu, W., & Park, C. B. (2012) · Polymer · doi:10.1016/j.polymer.2012.04.054 · Cited by 173

Plasticization of poly(lactic acid) (PLA) through chemical grafting of poly(ethylene glycol) (PEG) via in situ reactive blending

Choi, K., Choi, M., Han, D.-H., Park, T., & Ha, C. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.05.027 · Cited by 173

Development of polylactide bead foams with double crystal melting peaks

Nofar, M., Ameli, A., & Park, C. B. (2015) · Polymer · doi:10.1016/j.polymer.2015.05.048 · Cited by 172

Bio-renewable precursor fibers from lignin/polylactide blends for conversion to carbon fibers

Thunga, M., Chen, K., Grewell, D., & Kessler, M. R. (2013) · Carbon · doi:10.1016/j.carbon.2013.10.075 · Cited by 172

Morphology, thermal behavior and mechanical properties of binary blends of compatible biosourced polymers: Polylactide/polyamide11

Stoclet, G., Séguéla, R., & Lefebvre, J. (2011) · Polymer · doi:10.1016/j.polymer.2011.02.002 · Cited by 171

Mechanical properties of poly(lactic acid) and wheat starch blends with methylenediphenyl diisocyanate

Wang, H., Sun, X. S., & Seib, P. A. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10457 · Cited by 170

Fully biodegradable blends of poly(l-lactide) and poly(ethylene succinate): Miscibility, crystallization, and mechanical properties

Lu, J., Qiu, Z., & Yang, W. (2007) · Polymer · doi:10.1016/j.polymer.2007.05.035 · Cited by 170

High molecular weight copolymers of l-lactide and ?-caprolactone as biodegradable elastomeric implant materials

Grijpma, D. W., Zondervan, G. J., & Pennings, A. J. (1991) · Polymer Bulletin · doi:10.1007/bf00316902 · Cited by 170

Thermal degradation and mechanical properties of PET blends

Girija, B. G., Sailaja, R. R. N., & Madras, G. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.03.003 · Cited by 167

Improving Polylactide/Starch Biocomposites by Grafting Polylactide with Acrylic Acid – Characterization and Biodegradability Assessment

Wu, C.-S. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200400159 · Cited by 164

Filling of poly(lactic acid) with native starch

Jacobsen, S., & Fritz, H. ‐. (1996) · Polymer Engineering and Science · doi:10.1002/pen.10680 · Cited by 162

Influence of coalescence and interfacial tension on the morphology of PP/HDPE compatibilized blends

de Souza, A. M. C., & Demarquette, N. R. (2002) · Polymer · doi:10.1016/s0032-3861(02)00223-9 · Cited by 161

Interfacial Properties, Viscoelasticity, and Thermal Behaviors of Poly(butylene succinate)/Polylactide Blend

Wu, D., Yuan, L., Laredo, E., Zhang, M., & Zhou, W. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie2022288 · Cited by 159

Morphology and Properties of Injection Molded Solid and Microcellular Polylactic Acid/Polyhydroxybutyrate-Valerate (PLA/PHBV) Blends

Zhao, H., Cui, Z., Sun, X., Turng, L., & Peng, X. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie301573y · Cited by 159

Morphology, miscibility and continuity development in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends

Jalali Dil, E., Carreau, P. J., & Favis, B. D. (2015) · Polymer · doi:10.1016/j.polymer.2015.05.012 · Cited by 158

Blend of Polypropylene/Poly(lactic acid) for Medical Packaging Application: Physicochemical, Thermal, Mechanical, and Barrier Properties

Ploypetchara, N., Suppakul, P., Atong, D., & Pechyen, C. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.07.150 · Cited by 158

Comparison of denitrification performance and microbial diversity using starch/polylactic acid blends and ethanol as electron donor for nitrate removal

Shen, Z., Zhou, Y., & Wang, J. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.12.169 · Cited by 158

Biodegradation behavior of P(3HB,4HB)/PLA blends in real soil environments

Weng, Y.-X., Wang, L., Zhang, M., Wang, X.-L., & Wang, Y.-Z. (2013) · Polymer Testing · doi:10.1016/j.polymertesting.2012.09.014 · Cited by 158

Tailoring poly(lactic acid) for packaging applications via the production of fully bio-based in situ microfibrillar composite films

Kakroodi, A. R., Kazemi, Y., Nofar, M., & Park, C. B. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.130 · Cited by 157

Mechanical properties and phase morphology of super-tough PLA/PBAT/EMA-GMA multicomponent blends

Wu, N., & Zhang, H. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.01.063 · Cited by 157

Production of Insulin‐Loaded Poly(Ethylene Glycol)/Poly(l‐Lactide) (PEG/PLA) Nanoparticles by Gas Antisolvent Techniques

Elvassore, N., Bertucco, A., & Caliceti, P. (2001) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.1113 · Cited by 155

Preparation and characterization of biodegradable polylactide/thermoplastic polyurethane elastomer blends

Han, J., & Huang, H. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.33338 · Cited by 154

Transparent and ductile poly(lactic acid)/poly(butyl acrylate) (PBA) blends: Structure and properties

Meng, B., Deng, J., Liu, Q., Wu, Z., & Yang, W. M. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.10.009 · Cited by 153

Effect of Chain-Extenders on the Properties and Hydrolytic Degradation Behavior of the Poly(lactide)/ Poly(butylene adipate-co-terephthalate) Blends

Dong, W., Zou, B., Yan, Y., Ma, P., & Chen, M. (2013) · International Journal of Molecular Sciences · doi:10.3390/ijms141020189 · Cited by 152

Comparison of the thermal, dynamic mechanical and morphological properties of PLA-Lignin & PLA-Tannin particulate green composites

Anwer, M. A. S., Naguib, H. E., Celzard, A., & Fierro, V. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.08.028 · Cited by 152

A General Thermodynamic Theory of the Spreading of Liquids to Form Duplex Films and of Liquids or Solids to Form Monolayers

Harkins, W. D. (1941) · The Journal of Chemical Physics · doi:10.1063/1.1750953 · Cited by 152

Reactive compatibilization of biodegradable poly(lactic acid)/poly(ε‐caprolactone) blends with reactive processing agents

Harada, M., Iida, K., Okamoto, K., Hayashi, H., & Hirano, K. (2008) · Polymer Engineering and Science · doi:10.1002/pen.21088 · Cited by 150

Miscibility and crystallization behaviour of poly(l-lactide)/poly(p-vinylphenol) blends

Zhang, L., Goh, S. H., & Lee, S. Y. (1998) · Polymer · doi:10.1016/s0032-3861(97)10167-7 · Cited by 149

Interfacial and rheological properties of PLA/PBAT and PLA/PBSA blends and their morphological stability under shear flow

Nofar, M., Maani, A., Sojoudi, H., Heuzey, M.-C., & Carreau, P. J. (2015) · Journal of Rheology · doi:10.1122/1.4905714 · Cited by 148

In situ formed crosslinked polyurethane toughened polylactide

Liu, G., He, Y., Zeng, J., Xu, Y., & Wang, Y. (2013) · Polymer Chemistry · doi:10.1039/c3py01649h · Cited by 148

Rubber toughening of poly(lactide) by blending and block copolymerization

Grijpma, D. W., Hofslot, R. D. A. V., Super, H. T. J., Nijenhuis, A. J., & Pennings, A. J. (1994) · Polymer Engineering and Science · doi:10.1002/pen.760342205 · Cited by 148

Reactive Blending of Biodegradable Polymers: PLA and Starch

Jun, C. L. (2000) · Journal of Polymers and the Environment · doi:10.1023/a:1010172112118 · Cited by 146

Thermal degradation of binary physical mixtures and copolymers of poly($epsiv;-caprolactone), poly(, -lactide), poly(glycolide)

Sivalingam, G., & Madras, G. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.12.008 · Cited by 146

Comparing life cycle energy and GHG emissions of bio‐based PET, recycled PET, PLA, and man‐made cellulosics

Shen, L., Worrell, E., & Patel, M. K. (2012) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.1368 · Cited by 146

The Effects of Process Engineering on the Performance of PLA and PHBV Blends

Nanda, M. R., Misra, M., & Mohanty, A. K. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000417 · Cited by 145

Enzymes’ Power for Plastics Degradation

Tournier, V., Duquesne, S., Guillamot, F., Cramail, H., Taton, D., Marty, A., & André, I. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00644 · Cited by 623

The Effect of Nanofillers on the Functional Properties of Biopolymer-Based Films: A Review

Jamróz, E., Kulawik, P., & Kopel, P. (2019) · Polymers · doi:10.3390/polym11040675 · Cited by 521

Super tough poly(lactic acid) blends: a comprehensive review

Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465

Extrusion-Based 3D Printing Applications of PLA Composites: A Review

Tümer, E. H., & Erbil, H. Y. (2021) · Coatings · doi:10.3390/coatings11040390 · Cited by 493

Preparation methods and applications of chitosan nanoparticles; with an outlook toward reinforcement of biodegradable packaging

Yanat, M., & Schroën, K. G. P. H. (2021) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2021.104849 · Cited by 460

Polylactic acid blends: The future of green, light and tough

Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640

Polylactic Acid and Its Blends for Biomedical Applications

Akkoyun, M., & Tuna, S. (2025) · Interdisciplinary biotechnological advances · doi:10.1007/978-981-95-0094-9_2 · Cited by 1

Morphological Characteristics, Properties, and Applications of Polylactide/Poly(ε‐caprolactone) Blends and Their Composites—A Review

Matumba, K. I., Mokhena, T. C., Ojijo, V. O., Sadiku, E. R., & Ray, S. S. (2024) · Macromolecular Materials and Engineering · doi:10.1002/mame.202400056 · Cited by 42

Novel PLA-based materials with improved thermomechanical properties and processability through control of morphology and stereochemistry. A study in improving toughness and processability of PLA by blending with biodegradable polymers and the two PLA enantiomers PLLA and PDLA to accelerate crystallinity and heat resistance

Kassos, N. (2019) · Bradford Scholars (University of Bradford)

Polylactic Acid and Their Blends for Biomedical Application

Pérez, E., & Martini, R. E. (2025) · Advanced structured materials · doi:10.1007/978-3-031-90979-5_9 · Cited by 1