Engineering gelatin-based alginate/carbon nanotubes blend bioink for direct 3D printing of vessel constructs
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Nowadays 3D bioprinting, due to its high structural reconstruction and low cost, has been a promising technology and gained expectation in the treatment of vascular diseases. Although some studies have reported that 3D printing of large-sized blood vessels in the human body has been achieved, there are still some problems to be solved urgently, such as the unfulfilled microvascular simulation and inferior biocompatibility and mechanical strength of scaffold materials. In this paper, the hybrid bioink prepared with gelatin, sodium alginate and carbon nanotubes were manufactured into cylindrical scaffolds through the collaboration between the vertical directional extrusion of printing nozzle and axial rotation of stepper motor module. Mouse epidermal fibroblasts were inoculated into the inner and outer walls of hollow tubular scaffolds to fabricate engineered blood vessels. The internal diameters of the bionic circular tubes printed in batches were 3 mm with an average wall thickness of 0.5 mm and a length of 7-10 cm. Results demonstrated that the proper doping of carbon nanotubes could effectively increase the mechanical properties of the composite scaffolds. Also, quantitative experiments proved that a small amount of doping of carbon nanotubes had little effect on cytotoxicity, and the constructs could meet the requirements of biomimetic vascular.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922
3D printing of functional biomaterials for tissue engineering
Zhu, W., Ma, X., Gou, M., Mei, D., Zhang, K., & Chen, S. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.03.014 · Cited by 822
Bioprinting for vascular and vascularized tissue biofabrication
Datta, P., Ayan, B., & Ozbolat, I. T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.035 · Cited by 431
Cited by
3D printing to innovate biopolymer materials for demanding applications: A review
Li, N., Qiao, D., Zhao, S., Lin, Q., Zhang, B., & Xie, F. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100459 · Cited by 142
Xu, J., Fang, H., Zheng, S., Li, L., Jiao, Z., Wang, H., Nie, Y., Liu, T., & Song, K. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.07.162 · Cited by 120
Self-citation3D Bioprinting of Tumor Models for Cancer Research
Kang, Y., Datta, P., Shanmughapriya, S., & Ozbolat, I. T. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00791 · Cited by 112
Alginate: Microbial production, functionalization, and biomedical applications
Wang, J., Liu, S., Huang, J., Ren, K., Zhu, Y., & Yang, S. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.125048 · Cited by 87
Damiri, F., Fatimi, A., Liu, Y., Musuc, A. M., Fajardo, A. R., Gowda, B. H. J., Vora, L. K., Shavandi, A., & Okoro, O. V. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122845 · Cited by 67
Metadata
- Authors
- Li, L., Qin, S., Peng, J., Chen, A., Nie, Y., Liu, T., & Song, K.
- Venue
- International Journal of Biological Macromolecules
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 145
- Pages
- 262-271
- ISSN
- 0141-8130 (ISSN-L)
- OpenAlex
- W2996039487
- Cited by
- 144
- References
- 5
- FWCI
- 5.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Engineering gelatin-based alginate/carbon nanotubes blend bioink for direct 3D printing of vessel constructs. https://app.cochat.ai/papers/10.1016/j.ijbiomac.2019.12.174
- The paper
- Li, L., Qin, S., Peng, J., Chen, A., Nie, Y., Liu, T., & Song, K. (2020). Engineering gelatin-based alginate/carbon nanotubes blend bioink for direct 3D printing of vessel constructs. International Journal of Biological Macromolecules. https://doi.org/10.1016/j.ijbiomac.2019.12.174
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.