The DOI matches its Crossref record.
Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V
Open accessAbstract
Abstract Additive manufacturing has become an increasingly popular advanced manufacturing technique, however, many questions concerning the reliability of parts fabricated by methods such as laser powder bed fusion must be addressed. In this research, the effect of surface roughness and size is investigated by designing various additively manufactured Ti-6Al-4V specimen geometries. These as-built specimens were designed to specifically determine the effect of surface area and part diameter on the fatigue behavior of specimens fabricated diagonally from the substrate. Results indicate that the fatigue behavior is more sensitive to part diameter than surface area. Parts with diameters of 4.90 mm or less showed higher surface roughness on the down-skin surface. This variation diminished, however, for specimens with diameters larger than 4.90 mm. Additionally, as part diameter decreased, the difference between the load-bearing and nominal stress amplitudes, caused by surface roughness, increased, resulting in significant scatter in the high cycle fatigue data.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
The influence of additive manufacturing processing parameters on surface roughness and fatigue life
Gockel, J., Sheridan, L., Koerper, B., & Whip, B. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.03.025 · Cited by 405
Al-Maharma, A. Y., Patil, S. P., & Markert, B. (2020) · Materials Research Express · doi:10.1088/2053-1591/abcc5d · Cited by 404
Fracture and fatigue in additively manufactured metals
Becker, T. H., Kumar, P., & Ramamurty, U. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.117240 · Cited by 377
Zhan, Z., & Li, H. (2021) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2020.105941 · Cited by 305
Metadata
- Authors
- Pegues, J., Roach, M., Scott Williamson, R., & Shamsaei, N.
- Venue
- International Journal of Fatigue
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 116
- Pages
- 543-552
- ISSN
- 0142-1123 (ISSN-L)
- OpenAlex
- W2842728719
- Cited by
- 378
- References
- 0
- FWCI
- 19.03
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V. https://app.cochat.ai/papers/10.1016/j.ijfatigue.2018.07.013
- The paper
- Pegues, J., Roach, M., Scott Williamson, R., & Shamsaei, N. (2018). Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V. International Journal of Fatigue. https://doi.org/10.1016/j.ijfatigue.2018.07.013
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.