The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
The influence of additive manufacturing processing parameters on surface roughness and fatigue life
Abstract
Abstract Additive manufacturing (AM) is used to create metal components with complex geometries where the internal surfaces cannot easily be post machined. Fatigue behavior in additively manufactured metals is largely driven by defects in the material such as porosity and surface roughness. This work investigates the processing-structure-property-performance (PSPP) relationship for varied contour processing parameters, and the resulting surface roughness features for alloy 718 fabricated using the laser powder bed fusion AM process. Two nondestructive characterization methods are used to determine the relationships between contour parameters and surface roughness characteristics. The benefits of each characterization technique and metrics required for an accurate representation of the additively manufactured surfaces are discussed. Axial fatigue testing is performed to connect the entire PSPP relationship. An understanding of the PSPP relationship with respect to surface roughness features and fatigue life can be used to guide future process parameter optimization and to inform the qualification strategy for AM components.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
Yadollahi, A., & Shamsaei, N. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.01.001 · Cited by 1,023
Surface texture metrology for metal additive manufacturing: a review
Townsend, A., Senin, N., Blunt, L., Leach, R. K., & Taylor, J. S. (2016) · Precision Engineering · doi:10.1016/j.precisioneng.2016.06.001 · Cited by 743
Beretta, S., & Romano, S. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.06.020 · Cited by 635
Masuo, H., Tanaka, Y., Morokoshi, S., Yagura, H., Uchida, T., Yamamoto, Y., & Murakami, Y. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.07.020 · Cited by 539
Effect of surface roughness on fatigue performance of additive manufactured Ti–6Al–4V
Greitemeier, D., Donne, C. D., Syassen, F., Eufinger, J., & Melz, T. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000053 · Cited by 379
Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V
Pegues, J., Roach, M., Scott Williamson, R., & Shamsaei, N. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.07.013 · Cited by 378
Fox, J. C., Moylan, S. P., & Lane, B. M. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.02.347 · Cited by 377
Fatemi, A., Molaei, R., Sharifimehr, S., Phan, N., & Shamsaei, N. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.03.044 · Cited by 282
Surface texture measurement for additive manufacturing
Triantaphyllou, A., Giusca, C. L., Macaulay, G. D., Roerig, F., Hoebel, M., Leach, R. K., Tomita, B., & Milne, K. A. (2015) · Surface Topography: Metrology and Properties · doi:10.1088/2051-672x/3/2/024002 · Cited by 252
Gockel, J., Beuth, J., & Taminger, K. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.09.004 · Cited by 209
Self-citation
Cited by
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities
Maleki, E., Bagherifard, S., Bandini, M., & Guagliano, M. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101619 · Cited by 528
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Al-Maharma, A. Y., Patil, S. P., & Markert, B. (2020) · Materials Research Express · doi:10.1088/2053-1591/abcc5d · Cited by 404
du Plessis, A., & Beretta, S. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101424 · Cited by 169
Metadata
- Authors
- Gockel, J., Sheridan, L., Koerper, B., & Whip, B.
- Venue
- International Journal of Fatigue
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 124
- Pages
- 380-388
- ISSN
- 0142-1123 (ISSN-L)
- OpenAlex
- W2924289059
- Cited by
- 405
- References
- 14
- FWCI
- 20.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The influence of additive manufacturing processing parameters on surface roughness and fatigue life. https://app.cochat.ai/papers/10.1016/j.ijfatigue.2019.03.025
- The paper
- Gockel, J., Sheridan, L., Koerper, B., & Whip, B. (2019). The influence of additive manufacturing processing parameters on surface roughness and fatigue life. International Journal of Fatigue. https://doi.org/10.1016/j.ijfatigue.2019.03.025
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.