The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Fatigue of additive manufactured Ti-6Al-4V, Part II: The relationship between microstructure, material cyclic properties, and component performance
Abstract
Abstract Part I of these two-part paper series focused on the process and structure relationships, effect of powder feedstock, fabrication parameters, and post fabrication treatments on the resulting microstructure, defect characteristics, and surface quality of the fabricated Ti-6Al-4V parts. This second part extends the study by evaluating the effect of the aforementioned factors on axial, torsion, and multiaxial fatigue behavior of the additively manufactured (AM) Ti-6Al-4V specimens. Despite the advantages of additive manufacturing techniques discussed in Part I, they are still rarely used in fatigue critical load carrying applications, partly due to insufficient understanding of fatigue behavior and its dependence on variations in material microstructure and defects. This becomes even more challenging when other process characteristics of AM including build orientation, residual stresses, and surface roughness are considered. This paper discusses these effects, as well as machine-to-machine variability and the effects of specimen geometry and size, post heat treatment, and multiaxial stress state. Experimental uniaxial, torsion, and multiaxial fatigue test results recently generated by the authors for laser beam powder bed fusion- produced Ti-6Al-4V alloy are reviewed. The observed behaviors and the influence of the aforementioned effects are then related to the resulting microstructure and defect characteristics discussed in Part I. Fatigue life prediction results for specimens based on the effective defect size calculated by extreme value statistics (EVS) of the internal defects and surface roughness are also presented and compared with experimental data. The observed behaviors and specimen test results are then used for fatigue life analysis and predictions of a link component as an illustrative application example.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Fatigue in Engineering (1980)
Fuchs, H. O., Stephens, R. I., & Saunders, H. (1981) · Journal of Engineering Materials and Technology · doi:10.1115/1.3225026 · Cited by 1,933
Carroll, B. E., Palmer, T. A., & Beese, A. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.12.054 · Cited by 1,507
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.11.011 · Cited by 1,475
Stephens, R. I., & Fuchs, H. O. (1980) · Wiley eBooks · Cited by 1,377
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
Yadollahi, A., & Shamsaei, N. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.01.001 · Cited by 1,023
Self-citationEffect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V
Simonelli, M., Tse, Y. Y., & Tuck, C. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.07.086 · Cited by 1,010
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Mower, T. M., & Long, M. J. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.068 · Cited by 1,001
Rafi, H. K., Karthik, N. V., Gong, H., Starr, T. L., & Stucker, B. E. (2013) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-013-0658-0 · Cited by 987
Gong, H., Rafi, K., Gu, H., Janaki Ram, G. D., Starr, T., & Stucker, B. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.147 · Cited by 940
Cited by
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Heat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Laser-based directed energy deposition (DED-LB) of advanced materials
Svetlizky, D., Zheng, B., Vyatskikh, A., Das, M., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2022) · Materials Science and Engineering: A · doi:10.1016/j.msea.2022.142967 · Cited by 331
Zhan, Z., & Li, H. (2021) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2020.105941 · Cited by 305
du Plessis, A., & Beretta, S. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101424 · Cited by 169
Metadata
- Authors
- Molaei, R., Fatemi, A., Sanaei, N., Pegues, J., Shamsaei, N., Shao, S., Li, P., Warner, D. H., & Phan, N.
- Venue
- International Journal of Fatigue
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 132
- Pages
- 105363
- ISSN
- 0142-1123 (ISSN-L)
- OpenAlex
- W2989531192
- Cited by
- 264
- References
- 57
- FWCI
- 16.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fatigue of additive manufactured Ti-6Al-4V, Part II: The relationship between microstructure, material cyclic properties, and component performance. https://app.cochat.ai/papers/10.1016/j.ijfatigue.2019.105363
- The paper
- Molaei, R., Fatemi, A., Sanaei, N., Pegues, J., Shamsaei, N., Shao, S., Li, P., Warner, D. H., & Phan, N. (2020). Fatigue of additive manufactured Ti-6Al-4V, Part II: The relationship between microstructure, material cyclic properties, and component performance. International Journal of Fatigue. https://doi.org/10.1016/j.ijfatigue.2019.105363
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.