The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
The aluminium industry: A review on state-of-the-art technologies, environmental impacts and possibilities for waste heat recovery
Open accessAbstract
Aluminium is becoming more frequently used across industries due to its beneficial properties, generally within an alloyed form. This paper outlines the entire production process of aluminium from ore to the finished metallic alloy product. In addition, the article looks at the current state of the art technologies used in each discrete process step. Particular interest is directed towards casting technologies and secondary recycling as the relative proportion of recycled aluminium is increasing dramatically and aluminium is much more energy efficient to recycle than to produce through primary methods. Future developments within the industries are discussed, in particular inert anode technology. Aluminium production is responsible for a large environmental impact and the gaseous emissions and solid residue by-products are discussed. In addition to the environmental impact, the industry is highly energy intensive and releases a large proportion of energy to atmosphere in the form of waste heat. One method of reducing energy consumption and decreasing the environmental impact of emissions is by installing waste heat recovery technology. Applied methods to reduce energy consumption are examined, with a latter focus on potential applications within the industry for waste heat recovery technologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The composition of the continental crust
Hans Wedepohl, K. (1995) · Geochimica et Cosmochimica Acta · doi:10.1016/0016-7037(95)00038-2 · Cited by 6,345
Composition of the Continental Crust
Rudnick, R. L., & Gao, S. (2014) · Treatise on Geochemistry · doi:10.1016/b978-0-08-095975-7.00301-6 · Cited by 5,691
Kreith, F., Bohn, M., & Kirkpatrick, A. (1997) · Journal of Solar Energy Engineering · doi:10.1115/1.2887901 · Cited by 1,885
Waste heat recovery technologies and applications
Jouhara, H., Khordehgah, N., Almahmoud, S., Delpech, B., Chauhan, A., & Tassou, S. A. (2018) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2018.04.017 · Cited by 1,210
Self-citationAdvances in heat pump systems: a review
Chua, K. J., Chou, S. K., & Yang, W. M. (2010) · Applied Energy · doi:10.1016/j.apenergy.2010.06.014 · Cited by 966
Kaviany, M., & Kanury, A. (2002) · Applied Mechanics Reviews · doi:10.1115/1.1497490 · Cited by 766
The composition, recycling and utilisation of Bayer red mud
Khairul, M. A., Zanganeh, J., & Moghtaderi, B. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.11.006 · Cited by 667
Heat pipe based systems - Advances and applications
Jouhara, H., Chauhan, A., Nannou, T., Almahmoud, S., Delpech, B., & Wrobel, L. C. (2017) · Energy · doi:10.1016/j.energy.2017.04.028 · Cited by 614
Self-citationBrückner, S., Liu, S., Miró, L., Radspieler, M., Cabeza, L. F., & Lävemann, E. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.01.147 · Cited by 597
XPS study of the major minerals in bauxite: Gibbsite, bayerite and (pseudo-)boehmite
Kloprogge, J. T., Duong, L. V., Wood, B. J., & Frost, R. L. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2005.09.054 · Cited by 513
Heat pipes in modern heat exchangers
Vasiliev, L. L. (2005) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2003.12.004 · Cited by 460
HEAT PIPES: REVIEW, OPPORTUNITIES AND CHALLENGES
Faghri, A. (2014) · Frontiers in Heat Pipes · doi:10.5098/fhp.5.1 · Cited by 382
Li, Y., Min, X., Ke, Y., Liu, D., & Tang, C. (2019) · Waste Management · doi:10.1016/j.wasman.2018.11.019 · Cited by 367
Li, Q., Flamant, G., Yuan, X., Neveu, P., & Luo, L. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.066 · Cited by 323
Preparation and Melting of Scrap in Aluminum Recycling: A Review
Capuzzi, S., & Timelli, G. (2018) · Metals · doi:10.3390/met8040249 · Cited by 299
Mapping the Global Flow of Aluminum: From Liquid Aluminum to End-Use Goods
Cullen, J. M., & Allwood, J. M. (2013) · Environmental Science & Technology · doi:10.1021/es304256s · Cited by 296
A review of the applications of heat pipe heat exchangers for heat recovery
Srimuang, W., & Amatachaya, P. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.03.030 · Cited by 266
Addressing sustainability in the aluminum industry: a critical review of life cycle assessments
Liu, G., & Müller, D. B. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.05.030 · Cited by 252
Review on Thermionic Energy Converters
Abdul Khalid, K. A., Leong, T. J., & Mohamed, K. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2016.2556751 · Cited by 184
Milford, R. L., Allwood, J. M., & Cullen, J. M. (2011) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2011.05.021 · Cited by 169
Haraldsson, J., & Johansson, M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.05.043 · Cited by 154
The Aluminum Smelting Process and Innovative Alternative Technologies
Kvande, H., & Drabløs, P. A. (2014) · Journal of Occupational and Environmental Medicine · doi:10.1097/jom.0000000000000062 · Cited by 151
Spatial modelling of industrial heat loads and recovery potentials in the UK
McKenna, R., & Norman, J. (2010) · Energy Policy · doi:10.1016/j.enpol.2010.05.042 · Cited by 142
Editorial: Industrial waste heat recovery
Jouhara, H., & Olabi, A. G. (2018) · Energy · doi:10.1016/j.energy.2018.07.013 · Cited by 139
Self-citationImpacts of aluminum production: A cradle to gate investigation using life-cycle assessment
Farjana, S. H., Huda, N., & Mahmud, M. A. P. (2019) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2019.01.400 · Cited by 132
Cradle to gate: life cycle impact of primary aluminium production
Nunez, P., & Jones, S. (2015) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-015-1003-7 · Cited by 123
Chen, R., Cai, G., Dong, X., Mi, D., Puppala, A. J., & Duan, W. D. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.04.254 · Cited by 123
The interactions of microplastics and chemical pollutants
Crawford, C. B., & Quinn, B. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-809406-8.00006-2 · Cited by 121
Waste Heat Recovery in the EU industry and proposed new technologies
Agathokleous, R. A., Bianchi, G., Panayiotou, G. P., Aresti, L., Argyrou, M. C., Georgiou, G. S., Tassou, S. A., Jouhara, H., Kalogirou, S. A., Florides, G. A., et al. (2019) · Energy Procedia · doi:10.1016/j.egypro.2019.02.064 · Cited by 119
Self-citationCondensation in the KCl–NaCl system
Broström, M., Enestam, S., Backman, R., & Mäkelä, K. (2013) · Fuel Processing Technology · doi:10.1016/j.fuproc.2011.08.006 · Cited by 113
Design optimisation of aluminium recycling processes using Taguchi technique
Khoei, A. R., Masters, I., & Gethin, D. T. (2002) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(02)00273-x · Cited by 106
Heat Recovery from High Temperature Slags: A Review of Chemical Methods
Sun, Y., Zhang, Z., Liu, L., & Wang, X. (2015) · Energies · doi:10.3390/en8031917 · Cited by 105
Helle, S., Pedron, M., Assouli, B., et al. (2010) · Corrosion Science · doi:10.1016/j.corsci.2010.06.011 · Cited by 94
Photochemical Ozone Creation Potentials: A study of Different Concepts
Andersson‐Sköld, Y., Grennfelt, P., & Pleijel, K. (1992) · Journal of the Air & Waste Management Association · doi:10.1080/10473289.1992.10467060 · Cited by 92
Combustion and emissions analysis of Spent Pot lining (SPL) as alternative fuel in cement industry
Ghenaï, C., Inayat, A., Shanableh, A., Al-Sarairah, E., & Janajreh, I. (2019) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2019.05.157 · Cited by 92
Lü, G., Zhang, T., Ma, L.-N., et al. (2019) · Hydrometallurgy · doi:10.1016/j.hydromet.2019.05.018 · Cited by 85
Methods for Alkaline Recovery of Aluminum from Bauxite Residue
Kaußen, F., & Friedrich, B. G. (2016) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-016-0059-3 · Cited by 81
Environmental Impact Analysis of Primary Aluminium Production at Country Level
Paraskevas, D., Kellens, K., de Voorde, A. V., Dewulf, W., & Duflou, J. R. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.01.104 · Cited by 78
Material Flow Analysis in the Aluminum Industry
Bertram, M., Martchek, K. J., & Rombach, G. (2009) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2009.00158.x · Cited by 71
Bauxite Mining and Alumina Refining: Process Description and Occupational Health Risks
Donoghue, A. M., Frisch, N., & Olney, D. (2014) · Journal of Occupational and Environmental Medicine · doi:10.1097/jom.0000000000000001 · Cited by 62
Modelling of aluminium scrap melting in a rotary furnace
Zhou, B., Yang, Y., Reuter, M. A., & Boin, U. (2005) · Minerals Engineering · doi:10.1016/j.mineng.2005.07.017 · Cited by 62
Performance characteristics of a 200-kW organic Rankine cycle system in a steel processing plant
Sung, T., Yun, E., Kim, H. D., Yoon, S. Y., Choi, B.-S., Kim, K., Kim, J.-M., Jung, Y. B., & Kim, K. C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.09.018 · Cited by 62
Integrating industrial waste heat recovery into sustainable smart energy systems
Simeoni, P., Ciotti, G., Cottes, M., & Meneghetti, A. (2019) · Energy · doi:10.1016/j.energy.2019.03.104 · Cited by 61
Goupil, G., Helle, S., Davis, B., et al. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.08.157 · Cited by 47
Hamed, M. Y., Silver, J., & Wilson, M. T. (1983) · Inorganica Chimica Acta · doi:10.1016/s0020-1693(00)91289-1 · Cited by 47
Kvande, H. (2014) · Journal of Occupational and Environmental Medicine · doi:10.1097/jom.0000000000000154 · Cited by 40
Water scarcity footprint of primary aluminium
Buxmann, K., Koehler, A., & Thylmann, D. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-015-0997-1 · Cited by 38
Prospective Study of the World Aluminium Industry
Zheng, L., & Antonio, S. R. (2008) · Joint Research Centre (European Commission) · doi:10.2791/36024 · Cited by 32
Jilvero, H., Mathisen, A., Eldrup, N. H., Normann, F., Johnsson, F., Müller, G. I., & Melaaen, M. C. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.11.695 · Cited by 28
Exploring Cu2O/Cu cermet as a partially inert anode to produce aluminum in a sustainable way
Feng, L., Xie, N., Shao, W., Zhen, L., & Иванов, В. В. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.04.198 · Cited by 22
Comparison of three combustion models for simulating anode baking furnaces
Grégoire, F., & Gosselin, L. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2018.04.006 · Cited by 16
Depolarised gas anodes for aluminium electrowinning
Haarberg, G. M., Kvalheim, E., Ratvik, A. P., Xiao, S., & Mokkelbost, T. (2010) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(09)60434-9 · Cited by 14
Cited by
Heavy metals: toxicity and human health effects
Jomova, K., Alomar, S. Y., Nepovimova, E., Kuca, K., & Valko, M. (2025) · Archives of Toxicology · doi:10.1007/s00204-024-03903-2 · Cited by 983
Making sustainable aluminum by recycling scrap: The science of “dirty” alloys
Raabe, D., Ponge, D., Uggowitzer, P. J., Roscher, M., Paolantonio, M., Liu, C., Antrekowitsch, H., Kozeschnik, E., Seidmann, D., Gault, B., et al. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100947 · Cited by 626
Sayed, E. T., Wilberforce, T., Elsaid, K., Rabaia, M. K. H., Abdelkareem, M. A., Chae, K.-J., & Olabi, A. G. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.144505 · Cited by 552
Concentrating solar power (CSP) technologies: Status and analysis
Alami, A. H., Olabi, A. G., Mdallal, A., Rezk, A., Radwan, A., Rahman, S. M. A., Shah, S. K., & Abdelkareem, M. A. (2023) · International Journal of Thermofluids · doi:10.1016/j.ijft.2023.100340 · Cited by 270
Advancements and prospects of thermal management and waste heat recovery of PEMFC
Baroutaji, A., Arjunan, A., Ramadan, M., Robinson, J., Alaswad, A., Abdelkareem, M. A., & Olabi, A.-G. (2021) · International Journal of Thermofluids · doi:10.1016/j.ijft.2021.100064 · Cited by 256
Metadata
- Authors
- Brough, D., & Jouhara, H.
- Venue
- International Journal of Thermofluids
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 1-2
- Pages
- 100007
- ISSN
- 2666-2027 (ISSN-L)
- OpenAlex
- W2998376460
- Cited by
- 413
- References
- 52
- FWCI
- 26.57
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.